Rothi logo

Roth QuickTemp kompaktne süsteem

Roth-QuickTemp-Compact-System-Product

Toote spetsifikatsioonid

  • Mõõdud: 61 cm x 61 cm x 40 cm
  • Maksimaalne koormus: 2 mm meetri kohta
  • Vajalik kokkupanek

Roth-QuickTemp-Compact-System-Fig- (1)

Planlæg hvordan Compact pladerne skal udlægges. OBS. Roth-QuickTemp-Compact-System-Fig- (2)

Roth-QuickTemp-Compact-System-Fig- (3)  Always read the full documentation

Roth-QuickTemp-Compact-System-Fig- (4)Vacuum the subfloor. Roth-QuickTemp-Compact-System-Fig- (5)

Split the turn plate and lay it first.

Roth-QuickTemp-Compact-System-Fig- (6)

Grooves between plates must be aligned.

Roth-QuickTemp-Compact-System-Fig- (7)

Cut plates from the back, remove any burrs.

Roth-QuickTemp-Compact-System-Fig- (8)

Use transfer plates for feed pipes/to fill gaps.

Roth-QuickTemp-Compact-System-Fig- (9)

Vacuum before installation of pipes.

Roth-QuickTemp-Compact-System-Fig- (10)

Install pipe tight/close to the inner circle in turns.

Roth-QuickTemp-Compact-System-Fig- (11)

Install pipes and perform pressure test.

Roth-QuickTemp-Compact-System-Fig- (12)

Vacuum before installation of flooring underlayment

Roth-QuickTemp-Compact-System-Fig- (13)

Flooring underlayment. Avoid overlapping.Roth-QuickTemp-Compact-System-Fig- (14)Lay wood floor at a 90° angle to pipes.

Paigaldamise etapid

  1. Place component A on a flat surface with dimensions 61 cm x 61 cm.
  2. Attach component B to component A using the provided screws (X mm).
  3. Ensure that the maximum load of 2mm per meter is not exceeded.
  4. Connect component C to the assembly following the designated markings.
  5. Secure all components in place as per the assembly diagram.
  6. Continue adding components in the specified order until the structure is complete.
  7. Kontrollige stabiilsust ja tehke vajadusel kohandusi.
  8. Teie toode on nüüd kasutusvalmis!

KKK-d

Milline on toote maksimaalne kandevõime?

The maximum load capacity is 2mm per meter.

Kas mul on kokkupanekuks vaja täiendavaid tööriistu?

The assembly requires screws (X mm) provided with the product. No additional tools are necessary.

Kas toodet saab ladustamiseks lahti võtta?

Yes, the product can be disassembled following the reverse order of the installation steps.

Dokumendid / Ressursid

Roth QuickTemp kompaktne süsteem [pdf] Paigaldusjuhend
QuickTemp kompaktne süsteem, QuickTemp, kompaktne süsteem, süsteem

Viited

Jäta kommentaar

Teie e-posti aadressi ei avaldata. Kohustuslikud väljad on märgitud *