TECH F21 Mini Printer
Tehnilised andmed
- Trükitehnoloogia: Thermal printing (inkless)
- Trüki tüüp: Must-valge
- Paberi tüüp: Termopaberi rullid
- Paberi laius: 57 mm
- Prindi eraldusvõime: 203 XNUMX DPI
- Printimiskiirus: Approx. 10–15 mm/s
- Ühenduvus: Bluetooth
- Ühilduvad seadmed: Android, iOS
- Toetatud rakendused: Dedicated mobile printing app (varies by region)
- Aku tüüp: Taaslaetav liitiumaku
- Aku mahutavus: ~1000 mAh
- Laadimisviis: USB (Type-C or Micro-USB, model dependent)
- Operation Voltage: 5V
- Materjal: ABS plastik
- Suurus: Compact / portable
- Kaal: Lightweight (approx. 150–200 g)
- Supported Printing: Text, images, labels, QR codes, barcodes
Veaotsing
Printer ei lülitu sisse
- Veenduge, et aku on laetud.
- Proovige teist USB-kaablit või toiteallikat.
- Press and hold the power button for 3–5 seconds.
Bluetooth ei loo ühendust
- Turn Bluetooth OFF and ON again on your phone.
- Ensure the printer is not connected to another device.
- Reinstall or update the printer app.
- Keep the printer within 1–2 meters during pairing.
Blank or unclear printing
- Check that thermal paper is loaded correctly (print side facing out).
- Use compatible thermal paper only.
- Clean the print head gently.
- Ensure battery level is sufficient.
Paper not feeding properly
- Reinstall the paper roll correctly.
- Avoid overloading the paper compartment.
- Remove jammed paper carefully.
Rakendus ei reageeri
- Sulgege ja avage rakendus uuesti.
- Check app permissions (Bluetooth, storage).
- Taaskäivitage telefon.
Hooldus ja hooldus
- Kasutage only recommended thermal paper to avoid print head damage.
- Keep the printer dry and away from heat or direct sunlight.
- Clean the print head periodically with a soft, dry cloth.
- Do not pull paper forcefully while printing.
- Charge the battery at least once every 2–3 months if not in use.
- Avoid dropping or applying pressure to the device.
- Store in a dust-free environment when not in use.
Toote tutvustus
1.1 Pakendinimekiri
O The quantity and specifications of the paper roll(s) are tailored to the package you’ve chosen.
1.2 Printeri osade juhend
Alustamine
2.1 Rakenduse allalaadimine
Otsi the “FaithTag” app on App Store@ or Google PlayTM for download and installation.
2.2 Kasutusjuhend
O Before starting printing, please ensure that the paper roll is properly loaded into the paper compartment. For detailed instructions, refer to the manual section “3. Replacing the Paper Roll.”
Printeri sisselülitamiseks vajutage pikalt toitenuppu kolm sekundit, kuni märgutuli süttib.
Open the “FaithTag”Rakendus. 
Lubade andmine.
Klõpsake ülaosas nuppu [Ühenda].
Connection complete. Tap the homepage to view scriptures.
View scripture details, then tap print.
Access preview, then tap [Print].
Printimine on lõpetatud.
Rebige etikett maha mööda paberi väljapääsu.
Eemaldage alusmaterjal.
Kleepige etikett kuivale ja tasasele pinnale.
Tarkvaraliides on ainult viitamiseks. Täpse teabe saamiseks vaadake tegelikku kasutuslehte.
Paberirulli vahetamine
Võtke välja täiesti uus paberirull.
O Please skip this step if the paper roll you have is not newly purchased and boxed.
Push the Cover Open Button towards the arrow to take out the Paper RollSpindle.
Tõmmake liikuvat damper to remove the paper roll to be replaced.
Some paper rolls include tubes. Remove the paper tube after running out.
Sisestage üks spindli osa paigaldatavasse paberirulli.
Paigaldage teisaldatav D uuestiampja lükake see paberirulli servani.
Eemaldage lahtitulekuvastane kleebis paberirullilt.
Asetage paberirull paberilahtrisse.
Tõmmake paberirulli välja, kuni see ulatub paberi väljastusavast välja, ja seejärel sulgege klapikaas.
Ohutusjuhised
5.1 Manuaalse lõikuri ja prindipea juhised
Warning: Sharp edges on Manual Cutter! Do not touch the edges.
Warning: HOT component! Touching it when it is hot can cause burns to your fingers. Please wait for at least 30 minutes after turning off the power before touching it.
5.2 Laadimisjuhised
1. Please prepare your own power adapter (DC 5V/2A) with a Type-A port.
2. Insert the Type-C end (flat end) of the USB cable into F21’s Type-C Charger Port and plug the Type-A end (wide end) into the Type-A port of the power adapter.
3. After connecting and plugging in, please check the status of the printer indicator light. When the printer is charging, the indicator light will be flashing slowly with a “white light”.
4. Please charge for at least 20 minutes to meet quick usage; charging for 2-3 hours will complete the charging, or the following two states indicate full charge:when turned on, the indicator light stays “white”; when turned off, the light goes out.
5. As the printer may heat up during charging, avoid placing it on materials such as cotton or linen.
6. Once the battery is fully charged, please unplug the charger promptly.
O Avoid using the printer while charging.Using the printer while charging may lead to reduced charging speed, compromised print quality, and shortened battery life.
5.3 Puhastamine ja hooldus
O Please make sure the printer is turned off before performing any cleaning or maintenance.
Kui ilmnevad probleemid nagu tühjad read, udune print või puuduvad märgid, võib põhjuseks olla prindipeas olev mustus. Palun järgige neid samme:
If you have just finished printing, wait for at least 30 minutes for the Print
01 Head to cool down completely. Use a cotton swab dipped in alcohol or a print head cleaning pen (purchased
02 separately) to gently wipe the surface of the Print Head about 5 times to remove any dust and stains. Wait 5-10 minutes for the alcohol to evaporate completely. Thus, the cleaning
03 is done, and you can continue using the printer.
Teave kasutajale
6.1 FCC HOIATUS
See seade vastab FCC reeglite 15. osale.
Operation is subject to the ollowing two conditions:
(1) see seade ei tohi põhjustada kahjulikke häireid ja
(2) see seade peab vastu võtma kõik vastuvõetud häired, sealhulgas häired, mis võivad põhjustada soovimatuid toiminguid.
Kõik muudatused või modifikatsioonid, mida nõuetele vastavuse eest vastutav osapool ei ole sõnaselgelt heaks kiitnud, võivad tühistada kasutaja volitused seadet kasutada.
Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely tocause harmful interference in which case the user will be required to correct the interference at his own expense.
Seade vastab üldisele raadiosagedusliku kokkupuute avaldusele.
Seadet saab piiranguteta kasutada kaasaskantava kokkupuute tingimustes.
6.2 ISED TEADE (Kanada)
- inglise keel:
This device contains licence-exempt that comply with Innovation, Science and Economic Development Canada’ s licence-exempt RSS(s).
Toimimine toimub kahel järgmisel tingimusel:
(1) See seade ei tohi põhjustada häireid.
(2) See seade peab vastu võtma kõik häired, sealhulgas häired, mis võivad põhjustada seadme soovimatut tööd.
IC RF kokkupuute avaldus:
Seade vastab üldisele IC RF kokkupuute nõuetele. Seadet saab piiranguteta kasutada kaasaskantava kokkupuute tingimustes.
WARNING Please pay attention to electrical safety. Do not disassemble, crush or puncture the battery. This product is not a toy.
Erimärkused
Ettevõte võtab täieliku vastutuse selle juhendi läbivaatamise ja selgitamise eest, tehes kõik endast oleneva, et tagada selle täpsus.
Nevertheless, please note that any technical improvements to the product may not be separately notified, and that the images of the product, accessories, software interfaces, etc. in this manual serve solely as illustrations and references. Due to product updates and upgrades, theactual product may vary slightly from the images. Please refer to the physical product for accurate representations.
Dokumendid / Ressursid
 |
TECH F21 Mini Printer [pdfKasutusjuhend 2BSMY-F21, 2BSMY-F21, F21 Mini Printer, F21, Mini Printer, Printer |