MAJOR TECH DNS16 16A Day/Night Sensor with Timer
Tehnilised andmed
- Funktsioonide vahemik
- Rated Current 16A Max
- Hinnatud voltage 220-240V AC
- Sagedus 50 / 60Hz
- Ümbritsev valgus <3–50 luksi (reguleeritav)
- Tööniiskus <93% suhteline õhuniiskus
- Installation Surface Mount on Walls or Ceilings
- Built-in Timer Settings 1, 2, 3, 4, 5, 6, 7, 8, 9 Hours & Dusk to Dawn
- Working Temperature -20°C to 40°C
- Warranty 5 years – Limited
- Standardid IEC 60669-1, IEC 60669-2-1
- AS/NZS 60669.1, AS/NZS 60669.2.1
SISSEJUHATUS
The DNS16 day-night sensor automatically adjusts lighting based on ambient light levels and preset schedules. It features adjustable lux sensitivity and customizable timer settings. With a robust 16A rated current and IP66 waterproof rating, it integrates easily into both new and existing Installations. Ideal for outdoor lighting, streetlights, and security systems, it enhances energy efficiency and security by activating lights only when necessary. Its unique wall-box design with six knockouts allows for flexible installation. Simple yet effective, the DNS16 is the perfect solution for automated lighting control. Installation should be performed by a qualified professional.
Märkus
- There should be no obstruction affecting natural light in front of the sensor.
- There should be no swaying objects in front of the sensor.
- Avoid installing the sensor under the light or in a place where light will irradiate the sensor.
ÜHENDUS
HOIATUS: Danger of Death Through Electrical Shock. Must be installed by a professional electrician.
- Ühendage toiteallikas lahti.
- Katke või varjestage kõik kõrvalolevad pingestatud komponendid.
- Veenduge, et seadet ei saaks sisse lülitada.
- Kontrollige, et toiteallikas oleks lahti ühendatud.
- Ensure the power supply is turned off
- Loosen the screws and remove the front cover (refer to fig. 1)
- Remove the necessary knockouts for 1 x for pthe power supply and 1 each for up to 5 separate loads (refer to figures 2 & 3)
- Fit the necessary glands to the removed knockouts (refer to figures 4& 5)
- Identify the ideal placement and use the back housing of the sensor as a guide o ensure proper placement.
- Mark and drill holes for the screws and Fischerlugs, and secure the box to the installation surface
- Connect all loads through the knockouts and glands (up to 5 loads can be connected)
- Insert the power supply through the closest knock-out
- Connect the power cable into the terminal block as per the wiring diagram (refer to 6. Wiring Diagram).
- Once all connections are complete, replace and fasten the front cover using the included screws and screw caps (refer to figures 6 & 7)
- Kui installimine on lõpetatud, lülitage testimiseks sisse toide.
TEST
- Set the Lux setting to position “3” and switch the power on.
- For daytime testing, cover the sensor with a black cloth, box or any opaque test cover(refer to figure 8).
- Cover the detection window of the sensor, and the ambient light picked up by the sensor will be dark, and the connected loads should switch on.
- Remove the cover after testing; the connected loads should automatically switch off.
JUHTMESTIKU SKEEM
PROBLEEMID JA LAHENDUSED
Koormus ei tööta
- Veenduge, et ühendus toiteallika ja koormusega on õige.
- Kontrollige, kas koorem on töökorras.
- Check if the sensor settings correspond with the ambient light conditions.
Tundlikkus on kehv
- Check if there is any hindrance in front of the detector which may interfere with its ability to sense ambient light.
- Kontrollige, et ümbritseva õhu temperatuur oleks alla 40°C.
Andur ei saa koormust automaatselt välja lülitada:
- Check if there is an object casting a shadow or blocking ambient light.
- Veenduge, et toiteallikas oleks 220–240 V vahelduvvoolu.
MAJOR TECH (PTY) LTD
Lõuna-Aafrika
Austraalia
Dokumendid / Ressursid
 |
MAJOR TECH DNS16 16A Day/Night Sensor with Timer [pdfKasutusjuhend DNS16 16A Day Night Sensor with Timer, DNS16, 16A Day Night Sensor with Timer, Day Night Sensor with Timer, Sensor with Timer, Timer, Sensor |