BAYCKRC Dolphin Flight Controller User Manual

1. Sissejuhatus

The BAYCKRC Dolphin Flight Controller is an advanced drone MCU designed for superior stability and performance in unmanned aerial vehicles. It integrates high-performance processing, precise sensor technology, and comprehensive connectivity options to enhance your flying experience. This manual provides essential information for the proper installation, operation, and maintenance of your Dolphin Flight Controller.

2. Ohutusalane teave

• Üldine ohutus: Always operate drones responsibly and in accordance with local regulations. Ensure all connections are secure before flight.
• Toiteohutus: The flight controller operates on 3-6S input voltage. Vale voltage can cause permanent damage. Always verify power connections before applying power.
• Kuumahoiatus: Electronic components can generate heat during operation. Ensure adequate ventilation.
• Tuleoht: Keep the flight controller and associated components away from fire and extreme heat sources.
• Vanuse soovitus: This product is recommended for users 14 years and older due to the technical nature of drone assembly and operation.
• Staatiline tühjenemine: Handle the flight controller by its edges to avoid static discharge, which can damage sensitive electronic components.

3. Pakendi sisu

Veenduge, et kõik allpool loetletud esemed on teie pakendis olemas:

• 1x BAYCKRC Dolphin FC
• 4x M3 Silicone Grommets
• 1x hoolduskaart
• 1x 35mm cable for ESC
• 1x 65mm cable for Camera
• 1x 65mm cable for Video Transmitter
• 1x 65mm cable for Receiver
• 1x 70mm cable for ESC
• 1x 100mm cable for LED and Buzzer
• 1x 170mm cable for GPS

4. Toote lõppview

The Dolphin Flight Controller is engineered for high-performance drone applications. Key features include:

• Ultimate Stability Flight Control: Features an AT32F435 MCU paired with an ICM42688P gyroscope, achieving a Double 8KHz PID frequency for exceptionally smooth and stable flight.
• Smart Locking Socket Design: Seven SH1.0 locking sockets ensure secure connections for cameras, video transmitters, receivers, GPS modules, LED strips, and BB speakers.
• Dual Power Supply System: Equipped with powerful 9V3A + 5V3A dual channel BECs, including LC filtering on the 9V channel for clear image transmission and TVS diode protection.
• Complete Connectivity Hub: Direct connections for ESC interface, analog camera, compass, GPS module, LED strip with BB interface, receiver, and both digital and analog video transmitter interfaces.
• Täiustatud ohutusfunktsioonid: Built with SS56L anti-reverse connection diode and HD07B surge protection TVS diode. Includes a 16MB Black Box (W25Q128JVS1Q) for flight data logging and an integrated barometer for altitude precision.

Note: No product images or videos are available for embedding in this manual.

5. Seadistamine

5.1 Mounting the Flight Controller

1. Ensure your drone frame has 30.5mm x 30.5mm mounting holes.
2. Place the provided M3 Silicone Grommets into the mounting holes of the flight controller.
3. Carefully mount the Dolphin FC onto your drone frame, ensuring proper orientation (usually indicated by an arrow on the board).
4. Secure the flight controller using appropriate screws, being careful not to overtighten.

5.2 Juhtmete ühendamine

The Dolphin FC features SH1.0 locking sockets for secure connections. Refer to the pinout diagram (not provided in this manual, typically found on the manufacturer's website or included with the product) for specific connections. Use the provided cables for the following:

• ESC (elektrooniline kiiruse regulaator): Connect the ESC signal and power wires using the 35mm and 70mm ESC cables. Oversized 1.5mm×2mm solder pads are available on the reverse side for direct soldering if preferred.
• Kaamera: Connect your analog camera using the 65mm camera cable to the designated camera port.
• Video saatja (VTX): Connect your analog or digital VTX using the 65mm video transmitter cable. The 9V BEC channel provides filtered power for clear video.
• Vastuvõtja (RX): Connect your receiver (e.g., SBUS, CRSF, ELRS) using the 65mm receiver cable to the appropriate UART port.
• GPS-moodul: Connect your GPS module using the 170mm GPS cable to the dedicated GPS UART.
• LED & Buzzer: Connect LED strips and a buzzer using the 100mm cable to the BB interface.

Always double-check polarity before powering on the flight controller to prevent damage.

5.3 Firmware Flashing (Betaflight)

The Dolphin FC comes pre-flashed with Betaflight 4.5 firmware. If you need to update or re-flash the firmware:

1. Download the latest Betaflight Configurator software from the official Betaflight websaidile.
2. Connect the Dolphin FC to your computer via a USB cable.
3. In Betaflight Configurator, navigate to the "Firmware Flasher" tab.
4. Select the correct target for the Dolphin FC (refer to the manufacturer's documentation or Betaflight target list for AT32F435 based boards).
5. Choose the desired Betaflight version and click "Load Firmware [Online]" or "Load Firmware [Local]" if you have a downloaded .hex file.
6. Click "Flash Firmware" and wait for the process to complete. Do not disconnect the flight controller during flashing.

6. Kasutusjuhised

6.1 Esialgne konfiguratsioon (Betaflight)

After flashing, connect the flight controller to Betaflight Configurator and perform the following initial setup steps:

1. Sadamate vahekaart: Configure UARTs for your receiver, VTX, GPS, and other peripherals.
2. Konfiguratsiooni vahekaart: Set up your ESC protocol (e.g., DShot), accelerometer trim, board alignment, and other basic settings.
3. Vastuvõtja vahekaart: Kontrollige vastuvõtja sisendit ja kanalite kaardistust.
4. Režiimide vahekaart: Configure flight modes (Arm, Angle, Acro, etc.) and assign them to your radio switches.
5. PID Tuning: While the Dolphin FC offers excellent default performance, fine-tune PID values if necessary for your specific drone build and flying style.
6. OSD: Configure the On-Screen Display (OSD) to show relevant flight data.
7. Must kast: The integrated 16MB Black Box automatically logs flight data. You can analyze this data using the Blackbox Explorer tool for tuning and troubleshooting.

Always save your configuration after making changes. Perform a full functional check of your drone on a test bench before its maiden flight.

6.2 Lennueelsed kontrollid

• Ensure all propellers are securely attached and in the correct orientation.
• Kontrollige aku mahtutage ja ühendus.
• Check radio control link and functionality.
• Confirm GPS lock (if applicable) and barometer readings.
• Kontrollige kõiki juhtmeid lahtiste ühenduste või kahjustuste suhtes.

7. Hooldus

• Regulaarne ülevaatus: Periodically inspect the flight controller for any signs of physical damage, loose connections, or corrosion.
• Puhastamine: If necessary, gently clean the board with a soft brush and isopropyl alcohol. Ensure the board is completely dry before reapplying power.
• Püsivara värskendused: Keep your Betaflight firmware updated to benefit from new features, bug fixes, and performance improvements.
• Andmete varundamine: Regularly back up your Betaflight configuration using the "Diff All" or "Dump" commands in the CLI tab of Betaflight Configurator.

8. Veaotsing

9. Tehnilised andmed

10. Garantii ja tugi

For warranty information and technical support, please refer to the official BAYCKRC webveebisaidilt või võtke ühendust edasimüüjaga. Hoidke ostutõendit alles garantiinõuete esitamiseks.

Interneti-ressursid:

• For Betaflight documentation and support, visit: betaflight.com
• For general drone building and troubleshooting communities, search online forums and groups dedicated to FPV and RC drones.