AQQA Aquarium Heater 300W Instruction Manual

1. Olulised ohutusjuhised

Please read and understand all safety instructions before operating this product. Failure to follow these instructions may result in product damage, injury, or electric shock.

• Always ensure the heater is täielikult vee all in water before connecting it to a power source.
• Ensure proper water circulation around the heater for optimal performance and safety.
• After turning off the heater, allow it to cool in the aquarium water for 15-30 minutes before removing it. This prevents the residual heat from potentially damaging the protective shell.
• Do not place the aquarium heater directly into sand or mud, as this can lead to inaccurate temperature readings and inefficient heating.
• Hoidke seda toodet lastele kättesaamatus kohas.
• Inspect the power cord and heater for any damage before each use. Do not use if damaged.
• See seade on ette nähtud kasutamiseks ainult siseruumides.

2. Toote lõppview

The AQQA 300W Aquarium Heater is designed to maintain a stable and consistent water temperature in your aquarium. It features durable quartz heating rods for efficient heat transfer, a heat-resistant ABS protective shell, and an external digital controller for easy and safe temperature adjustment.

Peamised omadused:

• Durable Quartz Heating Rods: Provides fast, even, and efficient heat transfer.
• Heat-Resistant ABS Shell: Offers reliable performance and anti-scald protection.
• External Digital Controller: Allows for safe and convenient temperature adjustment outside the water.
• Intelligentne ülekuumenemiskaitse: Automatically stops heating if water temperature exceeds 95°F (35°C).
• Kuivkäigukaitse: Auto power-off if the heater is not fully submerged.
• Mälu funktsioon: Automatically restores previous temperature settings after a power interruption.
• Reguleeritav temperatuurivahemik: 15–34 °C (59–94 °F).

3. Seadistamine

Follow these steps to properly install your AQQA Aquarium Heater:

1. Attach Adhesive Pad: Clean the desired area on the outside of your aquarium tank. Stick the adhesive pad firmly onto the tank surface.
2. Mount Controller Bracket: Attach the controller bracket to the adhesive pad.
3. Place Controller: Securely place the external digital controller onto the mounted bracket.
4. Paigaldage kütteseade: Submerge the heater completely in your aquarium water. Ensure it is positioned vertically or horizontally in an area with good water circulation. Use the included suction cups to secure the heater to the inside wall of the tank.
5. Ühendage toide: Plug the heater's power cord into a suitable electrical outlet. The controller will display the current water temperature.

Oluline märkus:

• The heater must be fully submerged at all times during operation.
• Avoid burying the heater in sand or gravel to prevent inaccurate readings and potential damage.

4. Kasutusjuhised

The external digital controller provides easy access to adjust and monitor your aquarium's temperature.

Temperatuuri reguleerimine:

1. Unlock Controller: Long press the lock button (🔒) for 1-3 seconds to enter setting mode. The 'Set Temp' display will begin to flash.
2. Määrake sihttemperatuur: Kasutage üles (↑) ja alla (↓) arrow buttons to adjust the target temperature. Each press changes the temperature by 1°F/°C. The adjustable range is 59°F–94°F (15°C–34°C).
3. Automaatne lukustus: After 3 seconds of inactivity, the system will automatically lock the settings to prevent accidental changes.

Switching between Fahrenheit (°F) and Celsius (°C):

Long press the °F/°C button for 1-3 seconds to toggle between Fahrenheit and Celsius display modes.

Mälu funktsioon:

The heater is equipped with a memory function that automatically restores your previously set temperature settings after a power interruption, ensuring consistent warmth for your aquatic pets.

Toote video:

5. Ohutusfunktsioonid

The AQQA Aquarium Heater incorporates advanced safety systems to protect your aquatic environment.

Ülekuumenemise kaitse:

If the water temperature rapidly exceeds 95°F (35°C), the LED screen on the controller will flash "EE" and the heater will automatically stop heating to prevent harm to your fish and equipment.

Kuivkäigukaitse:

If the aquarium heater is not fully submerged in water, the controller will display "Eee" and automatically power off. This prevents the heater from operating dry, which could cause damage or fire hazards.

6. Hooldus

Regular maintenance ensures the longevity and efficient operation of your AQQA Aquarium Heater.

• Puhastamine: Unplug the heater and allow it to cool completely in the water (15-30 minutes) before removing. Gently wipe the heater's surface with a soft cloth to remove algae or mineral deposits. Do not use harsh chemicals or abrasive materials.
• Ülevaatus: Periodically check the heater and its power cord for any signs of damage, cracks, or wear. Ensure the suction cups are securely holding the heater in place.
• Vee muutused: Always unplug the heater during water changes to prevent dry-run activation or accidental damage.

7. Veaotsing

If you encounter any issues with your AQQA Aquarium Heater, refer to the following common problems and solutions:

8. Tehnilised andmed

Detailed technical specifications for the AQQA Aquarium Heater 300W.

9. Garantii ja tugi

For any questions, technical support, or warranty inquiries regarding your AQQA Aquarium Heater, please contact AQQA customer service. Refer to your product packaging or the official AQQA websaidilt kõige ajakohasemad kontaktandmed.

Oleme pühendunud kvaliteetsete toodete ja suurepärase klienditeeninduse pakkumisele.