PGST PG103-C+T53

PGST PG103-C+T53 Home Security Alarm System User Manual

Model: PG103-C+T53

1. Sissejuhatus

This manual provides detailed instructions for the installation, operation, and maintenance of your PGST PG103-C+T53 Home Security Alarm System. Please read this manual thoroughly before using the system to ensure proper functionality and safety.

2. Pakendi sisu

Veenduge, et kõik allpool loetletud esemed on teie pakendis olemas:

  • 1 x PGST Control Panel (Alarm Host)
  • 2 x Motion Sensors
  • 4 x ukse-/aknaandurit
  • 2 x RFID kaarti
  • 2 x kaugjuhtimispuldid
  • 1x turvakaamera
  • 1 x 64 GB SD-kaart
  • 1 x Power Adapter for Control Panel
  • 1 x Kasutusjuhend (käesolev dokument)
PGST PG103-C+T53 Home Security Alarm System components

Image 2.1: All components included in the PGST PG103-C+T53 Home Security Alarm System kit.

3. Seadistamine ja installimine

3.1. Juhtpaneeli paigaldamine

  1. Toiteühendus: Connect the control panel to a power outlet using the provided power adapter. The panel includes a backup lithium-ion battery.
  2. Esialgne sisselülitamine: The panel will power on automatically. Follow the on-screen prompts for initial setup.
  3. Paigutus: Install the control panel in a central location within your home, away from direct sunlight and moisture, and within Wi-Fi range.
PGST Control Panel mounted on a wall

Pilt 3.1: Näideample placement of the PGST Control Panel.

3.2. App Integration (Smart Life / Tuya Smart)

  1. Laadige rakendus alla: Laadige oma mobiilseadme rakenduste poest alla rakendus „Smart Life” või „Tuya Smart”.
  2. Konto loomine: Registreeru uue konto saamiseks või logi sisse, kui sul on see juba olemas.
  3. Lisa seade: In the app, tap "+" to add a new device. Select "Security & Video Surveillance" then "Alarm (Wi-Fi)".
  4. Ühendage Wi-Fi-ga: Follow the in-app instructions to connect the control panel to your 2.4GHz Wi-Fi network. (5GHz Wi-Fi is not supported).
Smart Life app interface for device control

Image 3.2: The Smart Life app interface for managing your security system.

3.3. Sensor Installation and Pairing

All sensors are pre-paired with the control panel. If re-pairing is needed, refer to the control panel's on-screen menu or app instructions.

3.3.1. Liikumisandurid

  • Paigutus: Install motion sensors in corners of rooms, hallways, or areas where intruders would likely pass. Mount them at a height of 6-8 feet (1.8-2.4 meters) for optimal detection.
  • Vältige: Do not place near heat sources, direct sunlight, or areas with significant air drafts.
  • Tuvastamisvahemik: Each motion sensor has a detection range of approximately 32 feet (10 meters) and a 110° field of view.
Motion sensor with 110 degree field of view

Image 3.3: Motion sensor detection range and field of view.

3.3.2. Door/Window Sensors

  • Paigaldamine: Mount the main sensor unit on the door or window frame and the smaller magnet unit on the moving part (door or window). Ensure the two parts are aligned and within 0.5 inches (1.2 cm) of each other when the door/window is closed.
  • Turvaline kinnitus: Use the provided adhesive pads or screws for secure installation.
Door and window sensors installed on various entry points

Pilt 3.4: Näideamples of door/window sensor installation.

3.4. Remote Controls and RFID Cards

  • Kaugjuhtimispuldid: Use the remote controls to arm, disarm, or trigger an emergency alarm. Buttons are typically labeled for these functions.
  • RFID-kaardid: Tap an RFID card on the designated area of the control panel to quickly arm or disarm the system.
Person using an RFID card to disarm the alarm system

Image 3.5: Using an RFID card for quick system control.

3.5. Security Camera Setup

Refer to the separate manual provided with the security camera for detailed setup instructions. Once configured, the camera can often be integrated and viewed through the Smart Life/Tuya Smart app.

3.6. 4G SIM Card Installation (Optional)

For SMS and phone call alerts, insert a 2G/3G/4G SIM card into the designated slot on the control panel. Ensure the SIM card is active and has sufficient credit/data. Note that telephone and SMS services may incur additional fees from your mobile carrier.

Diagram showing Wi-Fi and 4G SIM card connectivity options for the alarm system

Image 3.6: Connectivity options: Wi-Fi for app alerts and 4G/GSM for calls/SMS (SIM card not included).

4. Operatsioon

4.1. Süsteemi valvesse panemine ja valvest maha võtmine

  • Valve (eemaloleku režiim): Activates all sensors. Use when leaving the property. Can be done via control panel, remote, RFID card, or app.
  • Desarmeerimine: Deactivates all sensors. Use when returning home. Can be done via control panel, remote, RFID card, or app.
  • Home Mode (Stay Arm): Activates perimeter sensors (e.g., door/window sensors) while allowing free movement inside. Check app settings for configuration.
Scheduled arm and disarm times shown on a timeline

Pilt 4.1: Näideample of scheduled arming and disarming for daily routines.

4.2. Hoiatused ja teated

  • Sireen: If a sensor is triggered while armed, the 120dB siren will activate to deter intruders.
  • Rakenduse teavitused: Receive real-time alerts on your smartphone via the Smart Life/Tuya Smart app.
  • Phone Calls/SMS: If a SIM card is installed and configured, the system can send SMS messages and make calls to pre-set emergency contacts.
Smartphone displaying alarm security system SOS notifications

Pilt 4.2: Näideample of real-time alarm notifications on a smartphone.

4.3. Hääljuhtimine Alexaga

To enable voice control, link your Smart Life/Tuya Smart account with Amazon Alexa. Once linked, you can use voice commands such as "Alexa, arm my home" or "Alexa, disarm my home" (a PIN may be required for disarming).

Woman using Alexa voice command to control her home security system

Image 4.3: Integrating the alarm system with Amazon Alexa for voice control.

4.4. Anti-Tamper Funktsioon

The control panel features a physical anti-tamper mechanism. Any forced removal or tampering with the panel will trigger an immediate alarm. The alarm can only be stopped by entering the correct password on the panel.

4.5. Süsteemi laiendamine

The PGST system supports up to 99 additional sensors. To add new sensors, refer to the "Add Device" section in the Smart Life/Tuya Smart app or the control panel's settings menu.

5. Hooldus

5.1. Aku vahetamine

  • Juhtpaneel: The control panel has a built-in rechargeable lithium-ion battery for backup power. It charges automatically when connected to AC power.
  • Andurid: Motion sensors and door/window sensors are battery-powered. The app or control panel will indicate low battery status. Replace batteries with the specified type (usually CR2032 or AAA, check individual sensor labels).
  • Kaugjuhtimispuldid: Remote controls use button cell batteries. Replace when functionality decreases.

5.2. Puhastamine

Wipe the control panel and sensors with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the devices.

6. Veaotsing

ProbleemVõimalik põhjusLahendus
Süsteem ei loo ühendust WiFi-gaVale WiFi parool; 5 GHz võrk; nõrk signaal.Ensure correct 2.4GHz Wi-Fi password. Move panel closer to router. Restart router and panel.
Andurid ei käivita alarmiLow battery; sensor out of range; sensor not properly paired; system disarmed.Check sensor batteries. Ensure system is armed. Re-pair sensor if necessary. Check sensor placement.
Rakenduste märguandeid poleApp permissions not granted; phone's notification settings disabled; poor internet connection.Check app notification permissions. Ensure stable internet connection on phone and panel.
SIM card not working for calls/SMSSIM not active; incorrect APN settings; insufficient credit; 5G SIM.Verify SIM card is active and has credit. Ensure it's a 2G/3G/4G compatible SIM. Check APN settings in panel menu.
ValehäiredImproper sensor placement; pets; environmental factors (e.g., strong drafts).Adjust motion sensor sensitivity. Reposition sensors away from pets or drafts. Ensure door/window sensors are securely mounted.

7. Tehnilised andmed

FunktsioonDetail
Mudeli numberPG103-US-4G-C+T53-64G
KaubamärkPGST
Ühenduvustehnoloogia2.4GHz Wi-Fi, 2G/3G/4G GSM (SIM card not included)
ToiteallikasBattery Powered (Control Panel: 1 Lithium Ion battery included for backup)
Juhtpaneeli mõõtmed (P x L x K)Ligikaudu 8 x 3 x 3 tolli
Juhtpaneeli kaalUmbes 3.2 untsi
Sireeni väljund120 dB
Toetatud maksimaalsed andurid99+
Liikumisanduri ulatus32 jalga (10 meetrit)
Motion Sensor Field of View110°
Rakenduste ühilduvusTark elu, Tuya Smart
Voice Assistanti ühilduvusAmazon Alexa, Google'i assistent

8. Garantii ja tugi

For warranty information and technical support, please refer to the documentation included with your purchase or contact PGST customer service directly. Contact details can typically be found on the manufacturer's websait või toote pakend.

Online resources and FAQs may also be available through the Smart Life or Tuya Smart app support sections.

Seotud dokumendid - PG103-C+T53

Preview PGST nutikas valvesüsteem – kasutusjuhend ja tugi
Alustage oma PGST nutika valvesüsteemiga (PG-103, PG107). See juhend sisaldab kasutusjuhiseid, tugiteenuste kontaktandmeid ja teavet mitmekeelsete koduturvalisuse ressursside kohta.
Preview GSM- ja WiFi-alarmisüsteemi kasutusjuhend
GSM- ja WiFi-häiresüsteemi kasutusjuhend, mis kirjeldab PG103 häiresüsteemi funktsioone, seadistamist, kasutamist ja mobiilirakenduse integreerimist.
Preview PGST PG-109 häirehosti kasutusjuhend
Põhjalik kasutusjuhend PGST PG-109 Alarm Host turvasüsteemi kohta, mis hõlmab paigaldamist, kasutamist, funktsioone, nagu kaugjuhtimispult, traadita andurid, rakenduste integreerimine ja tehnilised andmed.
Preview Wireless Smoke Alarm Detector User Manual (PG-S11W WIFI)
Comprehensive user manual for the PG-S11W WIFI Wireless Smoke Alarm Detector, covering product overview, technical parameters, installation, usage guide, troubleshooting, maintenance, and storage.
Preview PGST PG-500 GSM 2G/4G/WiFi valvesüsteemi kasutusjuhend
PGST PG-500 GSM 2G/4G/WiFi valvesüsteemi üksikasjalik kasutusjuhend. Hõlmab paigaldamist, mobiilirakenduse seadistamist ja kasutamist, süsteemi seadeid, igapäevast kasutamist, hooldust, tehnilisi kirjeldusi ja tõrkeotsingut.
Preview PGST WIFI ukse-aknaanduri kasutusjuhend
PGST WIFI ukse-akna anduri kasutusjuhend, mis kirjeldab selle funktsioone, tööpõhimõtet, paigaldamist ja tehnilisi andmeid. Sisaldab FCC nõuetele vastavuse teavet.