Reloop RP-7 Professional 7-inch Turntable System User Manual

Sissejuhatus

Thank you for choosing the Reloop RP-7 Professional 7-inch Turntable System. This manual provides essential information for the safe and efficient use of your new turntable. Please read these instructions carefully before operating the device and retain them for future reference. The Reloop RP-7 is designed for both casual listeners of 7-inch vinyl and professional DJs, offering high-quality performance and precision for 45s culture.

Ohutusjuhised

• Toiteallikas: Connect the turntable only to an AC outlet with the specified voltage (230 Volts). Ensure the power cord is not damaged or pinched.
• Vesi ja niiskus: Ärge jätke seadet vihma, niiskuse ega liigse õhuniiskuse kätte. Ärge asetage seadmele vedelikega täidetud esemeid, näiteks vaase.
• Ventilatsioon: Tagage seadme ümber piisav ventilatsioon. Ärge blokeerige ventilatsiooniavasid.
• Soojusallikad: Hoidke seadet eemal soojusallikatest, näiteks radiaatoritest, küttekehadest, pliitidest või muudest seadmetest (sh amptõsteseadmed), mis toodavad soojust.
• Puhastamine: Disconnect the power cord before cleaning. Use a dry cloth only.
• Teenindus: Ärge proovige seda toodet ise hooldada. Andke kõik hooldustööd kvalifitseeritud hooldustöötajatele.
• Paigutus: Place the turntable on a stable, level surface to prevent vibrations and ensure proper operation.

Pakendi sisu

Veenduge, et pakendis on kõik esemed olemas:

• Reloop RP-7 Professional 7-inch Turntable System
• RCA kaabel
• Toitekaabel
• Slipmat
• Vastukaal
• Headshell with cartridge (may vary by region/package)
• Kasutusjuhend (see dokument)

Toode läbiview

The Reloop RP-7 is a professional 7-inch direct-drive DJ turntable system, specifically designed for 45s vinyl enthusiasts and DJs. It combines robust construction with advanced features for precise playback and scratching.

Esiosa view of the Reloop RP-7 Professional 7-inch Turntable System, showcasing the platter, tonearm, and controls.

Peamised omadused:

• High-Torque Direct-Drive Motor: Newly developed brushless DC motor with 2.5 kg/cm torque for reliable vinyl cueing and advanced scratching techniques.
• Precision Platter: Precision-machined, die-cast aluminum platter with finely tuned motor characteristics to minimize wow and flutter.
• Straight Copper Tonearm: Features internal rubber damping for superior vinyl tracking and minimal resonance.
• Height-Adjustable VTA Tonearm Base: Adapted from the RP-7000/8000 series for optimal tracking.
• Statically-Balanced Tonearm System: With hydraulic lift, eliminating the need for anti-skating.
• Universal Cartridge System Connection: Compatible with SME and headshell cartridges.
• Adjustable Tempo Range: ±8%, ±16%, or ±35% with a reset button.
• Multiple Playback Speeds: Supports 33 1/3, 45, and 78 RPM.
• Eemaldatav LED-tuli: Freely rotatable aluminum LED light for clear visibility in low-light conditions.
• Recessed Connection Terminal: Offers flush integration into a DJ setup with reliable protection for sensitive ports.
• Switchable Phono/Line Outputs: Gold-plated connectors prevent reliance on dedicated phono inputs.

The RP-7 features a newly developed brushless DC motor providing 2.5 kg/cm of torque for powerful and precise performance.

Key technical features of the Reloop RP-7, including pitch ranges, speeds, VTA tonearm, low-noise power supply, and SME cartridge connection.

Seadistamine

1. Lahtipakkimine ja paigutamine:

• Eemaldage ettevaatlikult kõik komponendid pakendist.
• Place the turntable on a flat, stable, and vibration-free surface.

2. Platter Installation:

• Gently place the aluminum platter onto the spindle.
• Asetage libisemismatt vaagna peale.

3. Tonearm and Cartridge Setup:

• Attach your preferred headshell with cartridge to the tonearm.
• Mount the counterweight onto the rear of the tonearm and adjust it to achieve proper tracking force for your cartridge. Refer to your cartridge manufacturer's recommendations for specific tracking force.
• Adjust the Vertical Tracking Angle (VTA) using the height-adjustable tonearm base to ensure the tonearm is parallel to the record surface.

4. Connecting to Audio System:

• Connect the supplied RCA cable from the turntable's output to your mixer or ampelujõulisem.
• The RP-7 features switchable phono/line outputs. Ensure the switch on the rear of the turntable is set correctly (PHONO for phono inputs, LINE for line inputs).
• Connect the ground wire from the turntable to the ground terminal on your mixer or amplifier to minimize hum.

Tagumine view of the Reloop RP-7, illustrating the recessed RCA and power connection terminals.

5. Toiteühendus:

• Connect the power cable to the turntable and then to a suitable 230V AC power outlet.

Kasutusjuhised

1. Sisse-/väljalülitamine:

• Turn the power knob clockwise to power on the unit. The LED will illuminate.
• Turn the power knob counter-clockwise to power off the unit.

2. Selecting Playback Speed:

• Vajutage nuppu 33, 45, või 78 RPM buttons to select the desired playback speed for your vinyl record. The corresponding LED will light up.

3. Starting/Stopping Playback:

• Asetage plaat vaagnale.
• Vajutage nuppu START/STOP nuppu plaadi pöörlemise alustamiseks.
• Lift the tonearm using the cue lever, position it over the desired track, and gently lower it onto the record.
• To stop, lift the tonearm, return it to the tonearm rest, and press the START/STOP nuppu.

4. Helitugevuse reguleerimine:

• Use the pitch fader to adjust the playback speed within ±8%, ±16%, or ±35% ranges.
• Vajutage nuppu RESET button to instantly return the platter speed to 0% pitch adjustment.

5. LED-valgusti kasutamine:

• Insert the detachable aluminum LED light into its designated port for improved visibility of the vinyl, especially in dimly lit environments.

The Reloop RP-7 provides excellent tracking accuracy and minimal resonances, crucial for both listening and DJ performance.

Hooldus

1. Seadme puhastamine:

• Enne puhastamist ühendage alati toide lahti.
• Use a soft, dry cloth to wipe the surface of the turntable. Do not use abrasive cleaners, waxes, or solvents.
• Vaadri jaoks kasutage kergelt damp vajadusel lapiga ja seejärel kuivatage hoolikalt.

2. Stylus Care:

• Puhastage pliiatsit regulaarselt pehme harjaga, mis on mõeldud pliiatsi puhastamiseks, harjates õrnalt tagant ettepoole.
• Replace the stylus when it shows signs of wear (typically after 500-1000 hours of playback) to prevent damage to your records.

3. Record Care:

• Keep your records clean and free of dust. Use a carbon fiber brush before each play.
• Hoidke plaate ümbristes vertikaalselt, et vältida nende moonutamist.

Veaotsing

If you encounter issues with your Reloop RP-7, refer to the following common problems and solutions:

If the problem persists after trying these solutions, please contact Reloop customer support.

Tehnilised andmed

Garantii ja tugi

Reloop products are manufactured to high-quality standards. For information regarding warranty coverage, please refer to the warranty card included with your product or visit the official Reloop website. For technical support, troubleshooting assistance beyond this manual, or service inquiries, please contact Reloop customer service through their official channels.

Lisateavet ja tugiressursse leiate aadressilt Reloop Store on Amazon or the official Reloop websaidile.