Bear Bottle Washer Pro: User Manual

1. Sissejuhatus

The Bear Bottle Washer Pro is an advanced 4-in-1 appliance designed to simplify the cleaning and sterilization of baby bottles, pump parts, and other baby essentials. This unit integrates washing, sterilizing, drying, and hygienic storage functions into a single, compact device, providing a comprehensive solution for busy parents.

With its powerful spray jets, high-temperature steam sterilization, and efficient hot air drying, the Bear Bottle Washer Pro ensures that your baby's items are thoroughly cleaned, sanitized, and ready for use. This manual provides detailed instructions for safe and effective operation, maintenance, and troubleshooting.

2. Olulised kaitsemeetmed

• Enne seadme kasutamist lugege läbi kõik juhised.
• Ärge kastke põhiseadet vette või muudesse vedelikesse.
• Veenduge, et seade oleks asetatud stabiilsele, tasasele ja kuumakindlale pinnale.
• Hoida lastele kättesaamatus kohas.
• Use only distilled or filtered water to prevent mineral buildup and prolong appliance life.
• Only use official Bear detergent tablets or recommended alternatives.
• Eemaldage pistik pistikupesast, kui seda ei kasutata ja enne puhastamist.
• Ärge kasutage ühtegi seadet kahjustatud juhtme või pistikuga või pärast seda, kui seade on tõrgeteta või on mingil viisil kahjustatud.
• This appliance is compatible with 120V 60Hz voltage.

3. Toote komponendid

• Juhtpaneeliga põhiseade
• Läbipaistev kaas
• Upper Rack (for smaller items like nipples, pacifiers, pump parts)
• Lower Rack (for bottles)
• Veepaak (mahutavus 2.6 l)
• Drain Pipe with Suction Cups
• 90 Bear Detergent Tablets

Figure 1: Bear Bottle Washer Pro with its internal racks and components.

4. Seadistamine

1. Pakkige seade lahti: Eemaldage ettevaatlikult kõik komponendid pakendist.
2. Seadme paigutamine: Place the Bear Bottle Washer Pro on a stable, flat surface near a sink or a bucket for drainage.
3. Connect the Drain Pipe: Attach the drain pipe to the designated outlet on the side of the main unit. Secure the other end of the drain pipe into a sink or a bucket using the suction cups to prevent spills.
4. Täitke veepaak: Remove the water tank from the side of the unit. Fill it with pure or filtered water up to the indicated MAX line (2.5L). Reattach the water tank securely to the main unit.
5. Ühendage: Connect the power cord to a 120V 60Hz electrical outlet.

Figure 2: Illustration of filling the water tank and connecting the drain pipe.

5. Kasutusjuhised

5.1 Esemete laadimine

• Place bottles upside down on the lower rack, ensuring they fit over the spray nozzles for thorough internal cleaning. The dual-tier rack can hold up to 4 standard bottles.
• Arrange smaller items like nipples, pacifiers, and breast pump parts on the upper rack.
• Add one Bear detergent tablet directly into the main washing cavity.
• Sulgege läbipaistev kaas kindlalt.

Figure 3: Properly loading bottles and accessories into the washer.

5.2 Režiimi valimine

The control panel features a clear LED display and touch buttons for various functions:

Figure 4: Bear Bottle Washer Pro control panel with mode selections.

Press the Power button to turn on the unit. Select your desired function by pressing the corresponding button. The cycle will begin automatically.

5.3 Adding Items Mid-Cycle

If you forget to add an item, you can pause the cycle by lifting the lid slightly. Wait for the water flow to stop, then open the lid fully to add items. Close the lid to resume the cycle.

Figure 5: The ability to pause and add items during a cycle.

6. Hooldus

6.1 Regulaarne puhastamine

• After each use, ensure the water tank is emptied and cleaned.
• Wipe down the interior and exterior of the unit with a damp riie.
• The racks are removable and can be hand-washed or placed in a dishwasher.

6.2 Katlakivi eemaldamine

Depending on water hardness, mineral deposits may accumulate. Descale the unit regularly (e.g., monthly) using a descaling solution or a mixture of white vinegar and water. Follow the descaling product's instructions or run a 'Steam' cycle with the vinegar solution, then rinse thoroughly.

6.3 HEPA-filtri hooldus

The HEPA filter helps maintain a sterile, odor-free environment during storage. Check the filter periodically and replace it as needed to ensure optimal performance. Refer to the product packaging for replacement filter information.

7. Veaotsing

8. Tehnilised andmed

9. Garantii ja tugi

The Bear Bottle Washer Pro comes with a 1-year limited warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from misuse, accident, alteration, or unauthorized repair.

For warranty claims, technical support, or any questions regarding your product, please contact Bear customer service through the official website or the contact information provided in your purchase documentation. Please have your model number (QXJ-C05F3) and proof of purchase ready.

10. Tootevideod