uwant D700 Wet Dry Vacuum Cleaner Instruction Manual

1. Olulised ohutusjuhised

Please read all safety instructions carefully before using the uwant D700 Wet Dry Vacuum Cleaner. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• See seade on mõeldud ainult koduseks kasutamiseks. Ärge kasutage seda õues ega äripindadel.
• Ärge kastke seadet vette või muudesse vedelikesse.
• Hoidke juuksed, lahtised riided, sõrmed ja kõik kehaosad avadest ja liikuvatest osadest eemal.
• Use only uwant recommended attachments and accessories.
• Ärge kasutage tuleohtlike või põlevate vedelike, näiteks bensiini, kogumiseks ega kasutage neid kohtades, kus neid võib esineda.
• Ärge korjake üles midagi, mis põleb või suitseb, näiteks sigarette, tikke või kuuma tuhka.
• Always turn off the appliance before connecting or disconnecting the brush roll or other accessories.
• Hoidke seadet siseruumides kuivas kohas.

2. Toote lõppview

The uwant D700 is a versatile wet dry vacuum cleaner designed for efficient cleaning of various floor types. It features advanced technologies for superior performance and ease of use.

Figure 2.1: uwant D700 Wet Dry Vacuum Cleaner main unit.

Peamised omadused:

• Intelligent Stain Detection: Automatically adjusts suction and water flow based on dirt level.
• 180° lame disain: Allows cleaning under low furniture with ease.
• 2mm Edge Cleaning: D-shaped brush head ensures thorough cleaning along edges and corners.
• Push-in Self-Cleaning Station: Automated 100°C hot water wash and 75°C hot air drying for the brush roll.
• Electrolyzed Water Sterilization: Generates electrolyzed water to eliminate 99.99% of germs without chemical disinfectants.
• 20,000 Pa imemisvõimsus: Powerful suction for both wet and dry messes.
• Pikk aku tööiga: Up to 45 minutes of runtime for cleaning areas up to 300 m².

Figure 2.2: The D-shaped rotating brush offers a 6 times wider cleaning surface and 0mm edge cleaning on 3 sides.

3. Seadistamine

3.1 Lahtipakkimine ja kokkupanek

Eemaldage pakendist ettevaatlikult kõik komponendid. Enne kokkupanekut veenduge, et kõik osad on olemas.

1. Sisestage käepide tolmuimeja põhiosa sisse, kuni see kindlalt oma kohale klõpsatab.
2. Place the clean water tank and dirty water tank into their respective compartments.
3. Ensure the brush roll is correctly installed in the brush head.

Figure 3.1: Illustration of the assembly process, showing components being connected.

3.2 Esmane laadimine

Enne esmakordset kasutamist laadige tolmuimeja täielikult.

1. Place the vacuum cleaner onto the self-cleaning station. The station is designed for easy push-in docking.
2. Connect the power adapter to the charging port on the station and plug it into a wall outlet.
3. The display will indicate charging status. A full charge typically takes approximately 4-5 hours.

Figure 3.2: The vacuum cleaner easily docks into its station with a single movement for charging and self-cleaning.

3.3 Puhta vee paagi täitmine

The clean water tank supplies water for cleaning. For optimal performance, use tap water.

1. Eemaldage puhta vee paak põhiseadmest.
2. Avage paagi kork ja täitke paak puhta kraaniveega kuni MAX-jooneni.
3. Close the cap securely and reinsert the tank into the vacuum cleaner.

Figure 3.3: Filling the clean water tank with tap water.

4. Kasutusjuhised

4.1 Sisse-/väljalülitamine ja režiimi valimine

Press the power button on the handle to turn the vacuum cleaner on or off. Use the mode button to switch between cleaning modes.

• Nutikas režiim: The vacuum automatically detects dirt levels and adjusts suction power and water flow. Ideal for general cleaning.
• Võimas režiim: Tagab maksimaalse imemisvõime ja veevoolu tugevalt määrdunud alade puhastamiseks.
• Kuiv režiim: Suction only, suitable for picking up dry debris without water.

Figure 4.1: The intelligent dirt detection system automatically adjusts suction and water flow for different stain levels.

4.2 Puhastustehnikad

For best results, move the vacuum cleaner slowly forward and backward over the area to be cleaned.

• Under Low Furniture: Utilize the 180° flat design by tilting the vacuum cleaner back to reach under sofas, beds, and other low-clearance areas.
• Servade puhastamine: The D-shaped brush head is designed to clean within 2mm of edges, ensuring no spots are missed. Guide the vacuum along baseboards and furniture edges.
• Electrolyzed Water Function: The D700 automatically generates electrolyzed water for sterilization during cleaning. No additional disinfectants are needed.

Figure 4.2: The 180° flat design allows easy cleaning under low furniture and in tight corners.

Figure 4.3: The D-shaped rotating brush provides superior edge cleaning, reaching within 2mm of walls.

5. Hooldus

Regular maintenance ensures optimal performance and extends the lifespan of your uwant D700.

5.1 Isepuhastuv tsükkel

After each use, it is recommended to run the self-cleaning cycle.

1. Place the vacuum cleaner on the self-cleaning station.
2. Press the self-clean button on the handle or station.
3. The station will perform a 100°C hot water wash of the brush roll, followed by 75°C hot air drying. This process helps prevent odors and bacterial growth.

Figure 5.1: The self-cleaning station performs a 100°C hot water wash and 75°C hot air drying for thorough brush maintenance.

Figure 5.2: The ultra-silent high-temperature drying chamber ensures quick and quiet drying of the brush roll.

5.2 Määrdunud vee paagi tühjendamine ja puhastamine

Empty the dirty water tank after each use to prevent odors and maintain hygiene.

1. Eemaldage musta vee paak põhiseadmest.
2. Avage paagi kaas ja valage ettevaatlikult määrdunud vesi ja praht välja.
3. Rinse the tank thoroughly with clean water. You can use the innovative deodorizing device to neutralize odors.
4. Enne paagi tagasi paigaldamist laske sel täielikult õhu käes kuivada.

Figure 5.3: The innovative deodorizing device helps eliminate unpleasant odors from the dirty water tank.

5.3 Cleaning the Brush Roll and Filter

Even with self-cleaning, occasional manual cleaning of the brush roll and filter is recommended.

1. Lülitage tolmuimeja välja ja eemaldage harjarulli kate.
2. Remove the brush roll. Rinse it under running water to remove any tangled hair or debris. The brush roll is IPX6 waterproof.
3. Remove the HEPA filter from the dirty water tank. Tap it gently to remove dust or rinse it if heavily soiled. Ensure it is completely dry before reinstallation.
4. Reassemble all parts once dry.

Figure 5.4: The IPX6 waterproof rotating brush can be easily rinsed for deep cleaning.

6. Veaotsing

If you encounter any issues with your uwant D700, please refer to the following common problems and solutions.

If the problem persists after trying these solutions, please contact uwant customer support for assistance.

7. Tehnilised andmed

8. Garantii ja tugi

The uwant D700 Wet Dry Vacuum Cleaner comes with a standard manufacturer's warranty. Please refer to the warranty card included in your product packaging for specific terms and conditions.

For technical support, troubleshooting assistance, or warranty claims, please contact uwant customer service. Contact information can typically be found on the official uwant webveebilehel või toote pakendil.

Please have your model number (D700) and purchase date ready when contacting support.