LEHMANN LHOSJ-6045

LEHMANN LHOSJ-6045 Centrifugal Juicer

Kasutusjuhend

Sissejuhatus

Tänan ostu eestasing the LEHMANN LHOSJ-6045 Centrifugal Juicer. This manual provides important information on how to safely and effectively operate and maintain your new juicer. Please read these instructions thoroughly before first use and keep them for future reference.

Olulised ohutusjuhised

Elektriseadmete kasutamisel tuleb alati järgida põhilisi ettevaatusabinõusid, sealhulgas järgmist:

Osade identifitseerimine

Familiarize yourself with the components of your LEHMANN LHOSJ-6045 Centrifugal Juicer:

Plahvatas view of LEHMANN LHOSJ-6045 Centrifugal Juicer components

Pilt: Plahvatas view showing all detachable parts of the juicer for easy identification and assembly.

Seadistamine ja kokkupanek

Before first use, wash all detachable parts (food pusher, cover, filter basket, pulp container, juice container) in warm soapy water, rinse thoroughly, and dry. Wipe the motor base with a damp riie.

  1. Asetage mootori alus stabiilsele, tasasele ja kuivale pinnale.
  2. Insert the filter basket securely onto the motor base. Ensure it clicks into place.
  3. Place the transparent cover over the filter basket and align the feed chute with the opening on the base.
  4. Kinnitage lukustusklamberamp to secure the cover to the motor base. Ensure it is firmly locked.
  5. Position the pulp container under the pulp spout.
  6. Asetage mahlanõu mahlatila alla.
  7. Sisestage toidutõukur etteandekanalisse.
Assembled LEHMANN LHOSJ-6045 Centrifugal Juicer

Pilt: The LEHMANN juicer fully assembled and ready for use, showing the main unit, pulp container, and juice container.

Kasutusjuhised

Puu- ja köögiviljade ettevalmistamine

Hand feeding carrots into the juicer's wide chute

Pilt: A hand demonstrating how to feed prepared carrots into the juicer's wide feed chute.

Mahlapressimise protsess

  1. Ensure the juicer is correctly assembled and the juice and pulp containers are in place.
  2. Ühendage seade vooluvõrku.
  3. Keerake kiiruse juhtnupp soovitud seadistusele:
  4. Gradually feed the prepared ingredients into the feed chute using the food pusher. Do not force ingredients down.
  5. The fresh juice will flow into the juice container, and the pulp will collect in the pulp container.
  6. Once juicing is complete, turn the speed control dial to '0' (off) and unplug the appliance.
Fresh juice flowing into the juice container

Pilt: Close-up of fresh juice being extracted and flowing into the designated juice container.

Hand removing the juice container from the juicer

Pilt: A hand carefully removing the filled juice container from the juicer after the juicing process.

Hooldus ja puhastus

Regulaarne puhastamine tagab optimaalse jõudluse ja pikendab mahlapressi eluiga. Enne puhastamist eemaldage seade alati vooluvõrgust.

Demonteerimine puhastamiseks

  1. Turn the speed control dial to '0' and unplug the juicer.
  2. Eemaldage toidutõukur.
  3. Avage lukustusklamberamp and remove the transparent cover.
  4. Tõstke filtrikorv ettevaatlikult välja.
  5. Remove the pulp container and empty it.
  6. Eemaldage mahlanõu.

Puhastusjuhised

Close-up of the juicer's filter basket with pulp residue

Pilt: Lähivõte view of the stainless steel filter basket, showing accumulated pulp after juicing, highlighting the area that requires thorough cleaning.

Veaotsing

If you encounter issues with your juicer, please refer to the following common problems and solutions:

ProbleemVõimalik põhjusLahendus
Mahlapress ei lülitu sisse.Pole vooluvõrku ühendatud; turvalukk pole aktiveeritud; toide välja lülitatudtage.Check power cord; ensure locking clamp is securely fastened; check power supply.
Mootor seiskub töötamise ajal.Overload protection activated; too much pressure on food pusher; filter basket clogged.Unplug, wait 15-20 minutes for motor to cool; reduce pressure; clean filter basket.
Madal mahla saagikus või märg viljaliha.Filter basket clogged; incorrect speed setting for ingredients.Clean filter basket thoroughly; use higher speed for harder produce.
Liigne vibratsioon või müra.Filter basket not properly seated; appliance on an uneven surface.Reassemble filter basket correctly; place juicer on a stable, flat surface.

Toote spetsifikatsioonid

FunktsioonDetail
KaubamärkLEHMANN
Mudeli numberLHOSJ-6045
Võimsus600 vatti
Voltage230 volti
Kiirused2 (Low/High)
Tselluloosi mahuti maht1.5 liitrit
Mahlamahuti maht450 milliliitrit
Söötmiskanali läbimõõt65 mm
MaterjalRoostevaba teras, plast
VärvRoostevaba teras ja must
Mõõdud (P x L x K)17.5 x 28 x 29.6 cm
Kaal2.14 kilogrammi
EriomadusedEasy to clean, Quiet motor, Overheat protection
HooldusjuhisedNõudepesumasinas pestavad osad
Dimensions of the LEHMANN LHOSJ-6045 Centrifugal Juicer

Pilt: Diagram illustrating the dimensions (length, width, height) of the LEHMANN LHOSJ-6045 Centrifugal Juicer.

Garantii ja klienditugi

Garantii teave

This product is covered by a manufacturer's warranty. Please refer to the warranty card included with your purchase or visit the official LEHMANN webTäpsemad garantiitingimused leiate veebisaidilt. Garantiinõuete esitamiseks hoidke ostutõend alles.

Klienditugi

For any questions, technical assistance, or if you require spare parts, please contact LEHMANN customer support. Contact details can typically be found on the manufacturer's websaidil või pakkematerjalides.

Websait: Visit the LEHMANN Store

Seotud dokumendid - LHOSJ-6045

Preview Lehmanni püsivara uuendaja: lukkude ja RFID-lugerite kasutusjuhend
See dokument annab LEHMANN Firmware Updater tarkvara kasutusjuhised, milles kirjeldatakse üksikasjalikult, kuidas värskendada Lehmanni lukkude, RFID-lugerite ja terminalide püsivara. See dokument sisaldab süsteeminõudeid, ühilduvaid tooteid ja samm-sammult juhiseid.
Preview LEHMANNI haldustarkvara kasutusjuhend: seadistamine ja kasutamine
LEHMANNi haldustarkvara (LMS) põhjalik kasutusjuhend, mis kirjeldab LEHMANNi RFID-süsteemide konfigureerimist, toimimist ja haldamist nii võrguühenduseta kui ka võrguühenduseta režiimis. Hõlmab transponderite ja lukkude haldamist, kasutajaseadeid ja süsteemi administreerimist.
Preview LEHMANN CNC pöördlauad - põhikataloogi 4. väljaanne | PGD, E, DD seeria
LEHMANNI CNC-pöördlaudade põhikataloogi 4. väljaanne. Avastage PGD, E-seeria, DD-seeria ja palju muud. Kiired ja lõtkuvabad lahendused tööstusautomaatika ja täppistootmise jaoks.
Preview LEHMANN VERTO RFID MIFARE Bedienungsanleitung | Elektronisches Schließsystem
Umfassende Bedienungsanleitung für das LEHMANN VERTO RFID MIFARE elektronische Schließsystem. Erfahren Sie mehr über Installation, Konfiguration, Betrieb und Fehlerbehebung.
Preview LEHMANN GIRO TA Elektronisches Tastaturschloss mit P2/P4 Adapter – Bedienungsanleitung
Umfassende Bedienungsanleitung für das LEHMANN GIRO TA elektroonilise Tastaturschloss mit P2/P4 Adapter. Enthält Informationen zur Installation, Bedienung, Sicherheit, Wartung, Configuration ja Fehlerbehebung.
Preview LEHMANN PRIMEWASH 2800 - Instrukcja Obsługi | Bezpieczeństwo i Użytkowanie
Instrukcja obsługi odkurzacza piorącego LEHMANN PRIMEWASH 2800. Dowiedz się, jak bezpiecznie i efektywnie korzystać z urządzenia, poznaj jego funkcje, konserwację i warunki gwarancji.