1. Ohutusjuhised
Palun lugege enne toote kokkupanekut ja kasutamist kõik juhised läbi ja mõistke neid. Nende juhiste eiramine võib põhjustada vigastusi või toote kahjustumist.
- Hoidke kõik väikesed osad ja pakkematerjalid lastele ja lemmikloomadele kättesaamatus kohas.
- Paigaldage voodi kriimustuste vältimiseks pehmele ja puhtale pinnale.
- Enne kasutamist veenduge, et kõik ühendused on kindlalt kinni. Kontrollige neid perioodiliselt ja pingutage vastavalt vajadusele.
- Ärge ületage maksimaalset kandevõimet 1000 naela.
- Use only the recommended mattress heights (6", 8", 10", 12") for optimal support and fit.
- Ärge seiske ega hüpake voodiraamil.
- Kui mõni osa on puudu või kahjustatud, ärge jätkake kokkupanekut. Võtke viivitamatult ühendust klienditoega.
2. Pakendi sisu
Your Polibi King Size Luxury Upholstered Platform Bed is shipped in two manageable boxes. Please verify that all components are present before beginning assembly.
Komponendid:
- Polsterdatud voodipeats
- Polsterdatud külgpiirded (2)
- Polsterdatud jalatoed
- Keskmine tugitala
- Solid Wood Slats (20 pieces, 10cm wide)
- Support Legs (various, including adjustable height options)
- Hardware Pack (bolts, washers, nuts, L-wrench, hammer)
- Montaažijuhised
A power drill (not included) is recommended for quicker assembly.
3. Seadistamine ja kokkupanek
Follow these steps carefully to assemble your Polibi King Size Luxury Upholstered Platform Bed.
- Paki lahti ja tuvasta osad: Carefully remove all components from the packaging. Lay them out on a clean, soft surface. Refer to the parts list to ensure all pieces are present.
- Kinnitage külgpiirded peatsi külge: Connect the upholstered side rails to the headboard using the provided hardware. Ensure the connections are firm but do not fully tighten yet.
- Kinnitage jalalaud: Connect the upholstered footboard to the other end of the side rails. Once all four sides are connected, gently tighten all bolts.
- Keskmise tugitala paigaldamine: Place the center support beam along the length of the bed frame. Secure it to the headboard and footboard brackets using the designated hardware.
- Tugijalgade kinnitamine: Screw the support legs into the designated points on the frame and center support beam. Ensure they are stable and level.
- Paigaldage liistud: Lay the solid wood slats across the bed frame, fitting them into the designated slots or attaching them with screws if required. Ensure even spacing. The slats are 10cm wide for enhanced support.
- Adjust Mattress Height (Optional): The bed frame is designed to accommodate mattresses of 6", 8", 10", or 12" heights. Adjust the bed frame installation method as per the separate instructions provided in the package to achieve the desired mattress height. This typically involves adjusting the height of the support brackets for the slats.
4. Kasutamine ja kasutamine
Once assembled, your Polibi King Size Luxury Upholstered Platform Bed is ready for use.
- Madratsi paigutus: Carefully place your mattress onto the installed slats. The embedded design helps keep the mattress securely in place.
- Kandevõime: The bed frame is designed to support up to 1000 lbs, including the mattress and occupants.
- Silent Sleep: Each support point is covered with sponge stickers to prevent noise, contributing to a quiet sleep environment.
5. Hooldus
Nõuetekohane hooldus pikendab teie polsterdatud platvormvoodi eluiga ja välimust.
- Kanga hooldus: The bed is upholstered with premium, waterproof polyester fabric. For general cleaning, gently wipe with a damp lapiga. Lekke korral kuivatage kohe puhta ja kuiva lapiga. Vältige karme kemikaale ega abrasiivseid puhastusvahendeid.
- Tolmutamine: Regularly dust the headboard and frame with a soft, dry cloth or a vacuum cleaner with a brush attachment.
- Riistvara kontroll: Periodically check all bolts and connections to ensure they remain tight. Re-tighten as needed to maintain stability.
- Vältige otsest päikesevalgust: Pikaajaline otsese päikesevalguse käes viibimine võib põhjustada kanga pleekimist.
6. Veaotsing
Levinud probleemide lahenduste leidmiseks vaadake seda jaotist.
- Krigisevad helid:
- Veenduge, et kõik poldid ja kruvid on kindlalt kinni keeratud.
- Check that the slats are properly seated and not rubbing against the frame. The sponge stickers on support points are designed to prevent noise.
- Verify that the mattress is correctly positioned and not causing friction.
- Voodi tundub ebastabiilne:
- Re-check all connections, especially where the side rails meet the headboard and footboard, and the center support beam.
- Ensure all support legs are firmly attached and making even contact with the floor.
- Madratsi libisemine:
- The embedded design should prevent mattress sliding. Ensure the mattress is fully seated within the frame.
- Verify that the correct mattress height setting was chosen during assembly.
7. Tehnilised andmed
| Kaubamärk | polübi |
| Mudel | King Size Luxury Upholstered Platform Bed |
| Suurus | Kuningas |
| Värv | Beež (vastavalt praegusele tootevariandile) |
| Toote mõõtmed | 96.5" P x 86.22" L x 43.3" K |
| Kaalu kandevõime | 1000 naela |
| Raami materjal | Täis männipuit |
| Polstri materjal | Premium Waterproof Polyester Fabric |
| Peatsi omadused | Oversized, Padded with High-Density Cotton & Sponge |
| Liistu laius | 10 cm |
| Compatible Mattress Heights | 6", 8", 10", 12" (adjustable) |
8. Garantii ja tugi
For specific warranty information and customer support, please refer to the documentation included with your purchase or contact Polibi customer service directly. Keep your purchase receipt for warranty claims.
If you encounter any issues not covered in this manual or require further assistance, please reach out to our support team.
Kontaktandmed: Please refer to the contact details provided on the product packaging or the official Polibi websaidile.
