Kasutusjuhend

Sissejuhatus

Tänan ostu eestasing the Feit Electric 14-inch Black Rectangular Lantern. This manual provides detailed instructions for the safe installation, operation, and maintenance of your new outdoor lighting fixture. Please read this manual thoroughly before installation and retain it for future reference.

Joonis 1: Esiosa view of the Feit Electric 14-inch Black Rectangular Lantern, showcasing its modern design with a clear glass cylinder and an exposed filament bulb.

Oluline ohutusteave

• Always turn off the power at the circuit breaker or fuse box before beginning installation or performing any maintenance.
• Konsulteerige kvalifitseeritud elektrikuga, kui te pole paigaldusprotsessis kindel.
• This fixture is designed for outdoor use and is suitable for wet locations.
• Veenduge, et kõik elektriühendused oleksid tehtud vastavalt kohalikele eeskirjadele ja määrustele.
• Ärge ületage määratud vattitage for the bulb. This fixture includes an integrated LED bulb.
• Käsitsege klaasist komponente ettevaatlikult, et vältida purunemist.
• Hoidke pakkematerjalid lastele kättesaamatus kohas.

Pakendi sisu

Carefully unpack your fixture and check that all parts are included. If any parts are missing or damaged, do not attempt to assemble or install the fixture. Contact Feit Electric customer service for assistance.

Figure 2: The product packaging for the Feit Electric 14-inch Black Rectangular Lantern, showing the lantern inside its box with product details and features.

Typically included components:

• 1 x Lantern Fixture with integrated LED bulb
• 1 x kinnitusplaat
• 2 x kinnituskruvid
• 3 x traatmutrid
• 1 x Gasket/Seal
• 1 x Kasutusjuhend (käesolev dokument)

Seadistamine ja installimine

Before you begin, ensure you have the following tools:

• Phillipsi kruvikeeraja
• Lameda kruvikeeraja
• Traadi eemaldajad
• Elektriline lint
• Kaitseprillid
• Redel (vajadusel)

Paigaldamise etapid:

1. Lülitage toide välja: Locate the circuit breaker or fuse box that controls the power to the outdoor light fixture. Turn off the power completely before proceeding. Verify the power is off using a voltage testija.
2. Eemaldage vana kinnitusdetail (vajadusel): Carefully disconnect and remove any existing light fixture from the junction box.
3. Kinnitusplaadi kinnitamine: Secure the mounting plate to the junction box using the provided mounting screws. Ensure the plate is level and firmly attached.
4. Tehke elektriühendused:
   • Ühendage must juhe kinnitusdetailist kuni must (kuum) juhe ühenduskarbist traatmutri abil.
   • Ühendage valge juhe kinnitusdetailist kuni valge (neutraalne) juhe ühenduskarbist juhtmemutri abil.
   • Ühendage roheline or bare copper (ground) wire from the fixture to the roheline or bare copper (ground) wire from the junction box using a wire nut. If no ground wire is available in the junction box, connect to the ground screw on the mounting plate.
   • Ensure all connections are secure and cover wire nuts with electrical tape for added insulation.
5. Kinnitage kinnitus: Carefully align the fixture with the mounting plate. Secure the fixture to the mounting plate using the provided screws, ensuring a snug fit against the wall. If a gasket is provided, place it between the fixture and the mounting surface for a weather-tight seal.
6. Toite taastamine: Kui seade on kindlalt paigaldatud ja kõik ühendused tehtud, taastage kaitselüliti toide.

Figure 3: The Feit Electric 14-inch Black Rectangular Lantern installed on the exterior wall of a house during daylight, demonstrating its aesthetic integration.

Kasutusjuhised

This Feit Electric lantern features a built-in Dusk-to-Dawn sensor, allowing for automatic operation.

• Automaatne töö: The integrated sensor will detect ambient light levels. The lantern will automatically turn on at dusk and turn off at dawn.
• Käsitsi tühistamine (kui on olemas): If connected to a wall switch, the fixture can be manually turned on or off. For continuous automatic operation, ensure the wall switch remains in the "ON" position.
• Hämardatav funktsioon: This fixture is dimmable. Ensure you use a compatible LED dimmer switch for optimal performance. Refer to the dimmer switch manufacturer's instructions for proper installation and operation.

Figure 4: The Feit Electric 14-inch Black Rectangular Lantern illuminated at night on the exterior of a house, showcasing its soft white light output.

Hooldus

The Feit Electric 14-inch Black Rectangular Lantern is designed for minimal maintenance.

• Puhastamine: To clean the fixture, ensure the power is off. Use a soft, damp cloth to wipe down the exterior surfaces. Do not use abrasive cleaners or solvents, as they may damage the finish or electrical components.
• Pirni vahetus: This fixture features an integrated LED bulb designed for long life. The bulb is not user-replaceable. If the LED light source fails, the entire fixture may need to be replaced. Contact Feit Electric customer service for assistance.
• Ülevaatus: Periodically inspect the fixture for any signs of damage, loose connections, or wear. Address any issues promptly to ensure safe and proper operation.

Veaotsing

Tehnilised andmed

Garantii ja tugi

Feit Electric products are manufactured to the highest quality standards. For warranty information, technical support, or to inquire about replacement parts, please contact Feit Electric customer service directly. Please have your model number (B0F8DYQLSF) and purchase date available when contacting support.

Visit the official Feit Electric webKontaktandmete ja lisateabe saamiseks toote kohta külastage veebilehte: www.feit.com