AURIOL värvilise ekraaniga ilmajaama kasutusjuhend

1. Sissejuhatus

Thank you for choosing the AURIOL Color Display Weather Station. This device provides comprehensive weather information, including indoor and outdoor temperature and humidity, animated weather forecasts, moon phase, and a clock with alarm functions. Please read this manual carefully before use to ensure proper operation and to maximize the lifespan of your product.

2. Ohutusalane teave

• Hoidke seadet eemal äärmuslikest temperatuuridest, otsesest päikesevalgusest, tugevast vibratsioonist ja löökidest.
• The main unit is designed for indoor use only. The outdoor sensor is splash-proof (IPX4) but should not be submerged in water.
• Ärge proovige seadet ise avada ega parandada. Jätke kogu hooldus kvalifitseeritud personalile.
• Hoidke patareisid lastele kättesaamatus kohas. Kasutatud patareid utiliseerige vastavalt kohalikele eeskirjadele.
• Kasutage põhiseadme jaoks ainult kaasasolevat toiteadapterit.

3. Pakendi sisu

Palun kontrollige pakendilt järgmisi esemeid:

• AURIOL Color Display Weather Station (Main Unit)
• Wireless Outdoor Sensor (IPX4 splash-proof)
• Põhiseadme toiteadapter
• 4 x Alkaline Batteries (2 x 1.5 V AA for sensor, 2 x 1.5 V AAA for main unit backup)
• Kasutusjuhend (see dokument)

4. Toote lõppview

Tutvuge oma ilmajaama peamiste komponentidega.

Joonis 4.1: Main unit (right) displaying time, date, indoor/outdoor temperature, humidity, and weather forecast. Wireless outdoor sensor (left) showing its own temperature and humidity.

Joonis 4.2: Close-up of the main unit's color display, highlighting the animated weather forecast symbols, moon phase indicator, and alarm icons (AL1, AL2).

Joonis 4.3: Tagumine view of the main unit. Visible are the control buttons (SET, UP, DOWN, ALARM, CH) and the battery compartment cover. The unit can be placed on a flat surface or wall-mounted.

5. Seadistamine

5.1. Aku paigaldamine

1. Välisandur: Open the battery compartment on the back of the wireless outdoor sensor. Insert 2 x 1.5 V AA alkaline batteries, observing the correct polarity (+/-). Close the compartment securely.
2. Main Unit (Backup): Open the battery compartment on the back of the main unit (refer to Figure 4.3). Insert 2 x 1.5 V AAA alkaline batteries, observing the correct polarity (+/-). These batteries serve as a backup in case of power outage. Close the compartment.

5.2. Powering On the Main Unit

Connect the provided power adapter to the DC input port on the back of the main unit and then plug it into a wall outlet. The display will light up permanently. The backup batteries will ensure settings are retained if the power adapter is disconnected.

5.3. Sensor Synchronization

Once both the sensor and main unit are powered, the main unit will automatically attempt to connect with the outdoor sensor. This process may take a few minutes. The outdoor temperature and humidity readings will appear on the main unit's display once connected. If synchronization fails, press and hold the "CH" button on the main unit to initiate a manual search for the sensor.

5.4. Anduri paigutus

Place the outdoor sensor in a shaded, dry location, protected from direct sunlight and rain, but within the 100m wireless range of the main unit. Avoid placing it near large metal objects or electrical appliances that could interfere with the signal. The sensor can be placed on a flat surface or mounted to a wall using the integrated hanging hole.

6. Kasutusjuhised

6.1. Kuva üleview

Värviline ekraan on jagatud mitmeks osaks:

• Üleval vasakul: Animated Weather Forecast symbols.
• Üleval paremal: Outdoor Temperature and Humidity.
• Vasak keskel: Kuu faas.
• Middle Right: Indoor Temperature and Humidity.
• Alt: Time, Date, Day of the Week, Alarm Indicators (AL1, AL2).

6.2. Setting Time, Date, and Day of the Week

1. Press and hold the "SET" button (refer to Figure 4.3) for 3 seconds to enter time setting mode. The hour digit will flash.
2. Use the "UP" or "DOWN" buttons to adjust the value.
3. Press "SET" again to confirm and move to the next setting (minutes, 12/24-hour format, year, month, day, day of week language).
4. Repeat steps 2 and 3 until all settings are configured. Press "SET" one last time to exit.

6.3. Alarmi sätted

The weather station features two separate alarms (AL1, AL2).

1. Press the "ALARM" button repeatedly to cycle through AL1, AL2, and alarm off.
2. To set an alarm, press and hold the "ALARM" button for 3 seconds when the desired alarm (AL1 or AL2) is displayed. The hour digit will flash.
3. Use "UP" or "DOWN" to adjust the hour, then press "ALARM" to confirm and move to minutes.
4. Adjust minutes with "UP" or "DOWN", then press "ALARM" to confirm and exit.
5. When an alarm sounds, press any button (except "SNOOZE") to stop it. Press "SNOOZE" for a temporary pause.

6.4. Temperatuuri ja niiskuse näit

• The main unit displays both indoor and outdoor temperature and humidity.
• Press the "UP" button to switch between Celsius (°C) and Fahrenheit (°F) temperature units.
• The display also shows minimum and maximum recorded temperatures and humidity for both indoor and outdoor. These values reset automatically every 24 hours or can be manually reset by pressing and holding the "DOWN" button.

6.5. Ilmateade

The weather station predicts weather conditions for the next 12-24 hours based on atmospheric pressure changes. The animated symbols (e.g., sunny, partly cloudy, cloudy, rainy, snowy) indicate the forecast. This is a prediction and may not always be 100% accurate.

6.6. Kuu faaside kuvamine

The moon phase icon on the display changes to reflect the current lunar phase.

6.7. Temperature/Freeze Alarm

The device features a temperature alarm and a freeze alarm. When the outdoor temperature drops to a certain threshold (typically near freezing point), a special icon or sound may activate to warn of potential frost conditions. Refer to the specific settings menu (usually accessed via "SET" or "ALARM" button in conjunction with "UP"/"DOWN") to configure these thresholds.

6.8. Aku oleku indikaator

Battery icons on the display will indicate the battery status for both the main unit (backup) and the outdoor sensor. Replace batteries promptly when the low battery indicator appears to ensure continuous operation.

7. Hooldus

• Puhastamine: Pühkige seadet pehme, damp riie. Ärge kasutage abrasiivseid puhastusvahendeid ega lahusteid.
• Patarei vahetus: Replace batteries in both the main unit (backup) and the outdoor sensor when the low battery indicator appears. Ensure correct polarity.
• Hoiustamine: Seadme pikemaajalisel hoiustamisel eemaldage kõik patareid, et vältida leket.

8. Veaotsing

9. Tehnilised andmed

• Mudel: 456364
• Kaubamärk: Auriol
• Ühenduvustehnoloogia: 433 MHz, 868 MHz (traadita)
• Outdoor Sensor Range: Kuni 100 m (avatud väljal)
• Toiteallikas (põhiseade): Power Adapter (included), 2 x 1.5 V AAA Alkaline Batteries (backup, included)
• Toiteallikas (välisandur): 2 x 1.5 V AA Alkaline Batteries (included)
• Erifunktsioon: Color Display, Min/Max Temperature/Humidity, Animated Weather Forecast, Moon Phase, Dual Alarms, Temperature/Freeze Alarm
• Materjal: Plastikust
• Värv: Must
• Välisanduri kaitse: IPX4 (pritsmekindel)
• Soovitatav kasutus: Kodu
• Spetsiifiline kasutus: Temperatuuri jälgimine

10. Garantii ja tugi

This AURIOL product comes with a standard manufacturer's warranty. For detailed warranty terms and conditions, please refer to the warranty card included in your package or contact your retailer. For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact AURIOL customer service through their official websaidil või ostudokumentidega kaasasolevatel kontaktandmetel.