Filter Tora Wireless Rotary Tattoo Machine Pen Instruction Manual

1. Toote lõppview

The Filter Tora Wireless Rotary Tattoo Machine Pen is designed for both beginners and experienced artists, offering freedom from wires and enhanced control. This device integrates a powerful motor with a long-lasting battery, providing a reliable and precise tattooing experience.

Põhifunktsioonid

• Juhtmevaba töö: Eliminates the need for external power cables, offering greater mobility and convenience.
• Pause and Timer Function: Allows artists to temporarily halt operation and track working hours for improved workflow management.
• Suure võimsusega aku: Equipped with a 1600mAh battery, providing approximately 5 hours of continuous operation at 8V after a full charge. Features Type-C charging for quick replenishment.
• Kohandatud mootor: Features a 12V 10000RPM motor, ensuring stable performance and efficient ink transfer.
• Reguleeritavad sätted: Offers an adjustable needle depth from 0-4.5mm and an operating voltage range of 4-12V, adjustable in precise 0.1V increments.
• Lai ühilduvus: Compatible with most standard tattoo cartridge needles, ensuring versatility for various tattooing styles.

2. Alustamine

2.1 Seadme laadimine

Before initial use, fully charge the tattoo machine. Connect the provided Type-C charging cable to the device's charging port and a suitable USB power adapter. The battery indicator on the display will show charging progress. A full charge typically takes approximately 2 hours, providing up to 5 hours of working time at 8V.

An illustration showing the 1600mAh battery of the Filter Tora Tattoo Machine being charged via a Type-C connector, indicating 5 hours working time and 2 hours charging time.

2.2 Installing Tattoo Cartridge Needles

1. Veenduge, et masin on välja lülitatud.
2. Carefully insert the desired tattoo cartridge needle into the machine's needle port.
3. Twist the needle cartridge gently until it is securely seated. The Filter Tora machine is compatible with most standard cartridge needles.

3. Kasutusjuhised

3.1 Power On/Off and Voltage Reguleerimine

• Toide sisse: Press and hold the power button (usually marked 'O' or a similar symbol) until the display illuminates.
• Reguleeri Voltage: Use the '+' and '-' buttons to increase or decrease the operating voltage. Voltage can be adjusted in 0.1V increments within the 4-12V range.
• Toide välja: Vajutage ja hoidke uuesti toitenuppu all, kuni ekraan kustub.

3.2 Pause and Timer Function

The device features a pause function to temporarily stop operation without powering down, and a timer to track working duration. Refer to the display for timer information. Specific activation steps for pause and timer may vary; consult the on-screen prompts or quick-start guide for detailed instructions.

3.3 Dot Mode

The Filter Tora Tattoo Machine includes a 10-level dot function, ranging from D0 to D9, for specialized dot shading techniques.

• Activate Dot Mode: Tap and hold the 'P' button.
• Valige tase: Use the '+' and '-' buttons to choose the desired dot mode level (D0-D9).
• Reguleeri Voltage in Dot Mode: Tap the 'P' button to switch to voltage adjustment, then use the '+' and '-' buttons.
• Exit Dot Mode: Simply tap and hold the power button again.

A close-up of the Filter Tora Tattoo Machine's control panel, illustrating the 'Dot Mode' function and voltage adjustment buttons.

3.4 Needle Depth Adjustment

The needle depth can be adjusted from 0-4.5mm by rotating the grip section of the machine. Rotate clockwise to decrease depth and counter-clockwise to increase depth, or as indicated by markings on the device.

4. Hooldus ja hooldus

Proper maintenance ensures the longevity and hygienic operation of your tattoo machine.

• Puhastamine: After each use, wipe down the exterior of the machine with a suitable disinfectant wipe. Avoid submerging the device in liquids.
• Steriliseerimine: The machine itself is not designed for autoclave sterilization. Only disposable components like needle cartridges should be used and disposed of properly.
• Hoiustamine: Hoidke masinat puhtas ja kuivas kohas, eemal otsesest päikesevalgusest ja äärmuslikest temperatuuridest.

5. Veaotsing

If you encounter issues with your Filter Tora Tattoo Machine, refer to the following common solutions:

• Masin ei lülitu sisse: Veenduge, et aku oleks täielikult laetud. Kui probleem püsib, võtke ühendust klienditoega.
• Ebajärjekindel võimsus/jõudlus: Check that the needle cartridge is correctly installed and not damaged. Verify the voltage seadistus.
• Aku tühjeneb kiiresti: Ensure the machine is fully charged before use. Battery life can be affected by higher voltage settings and continuous operation.

6. Tehnilised andmed

A table outlining the technical specifications of the Filter Tora Tattoo Machine, including material, dimensions, weight, motor, battery, operating voltage, RRM, switch frequency, needle depth, battery capacity, recharging time, and battery life.

7. Garantii ja klienditugi

Filter provides comprehensive after-sale service for your tattoo machine. If you encounter any problems or have suggestions regarding your device, please contact our customer support team. We are committed to assisting you and will respond to inquiries within 24 hours.

8. Toote visuaalid

8.1 Tootepildid

8.2 Ametlikud tootevideod