SRNE SL2410 PWM Solar Charge Controller User Manual

1. Sissejuhatus

This manual provides essential information for the safe and efficient operation of your SRNE SL2410 PWM Solar Charge Controller. The SL2410 is a 12V/24V auto-sensing, 10A Pulse Width Modulation (PWM) solar charge controller designed for various solar power systems, including street lights and monitoring devices. It features an IP67 waterproof rating and an aluminum shell for enhanced durability.

Peamised omadused:

• 12V/24V süsteemi helitugevustage auto-detection.
• LED numeric display and waterproof keys for easy operation.
• Täiustatud 3-stage PWM charging algorithm for battery health.
• Support for multiple battery types: sealed, GEL, flooded lead-acid, ternary-material lithium, and lithium iron phosphate.
• Five load working modes for diverse applications.
• External temperature sensor for precise temperature compensation.
• Power-down saving function for parameter retention.
• Comprehensive protections: overcharge, over-discharge, overload, short-circuit, reverse-connection, and TVS lighting protection.

Joonis 1: Esiosa view of the SRNE SL2410 PWM Solar Charge Controller, showing the display, keys, and cable connections.

2. Ohutusalane teave

Please read all instructions carefully before installation and operation to prevent damage to the controller, battery, or other components.

• Ensure all wiring is correct and connections are secure before applying power. Incorrect wiring can cause damage.
• Ühenda alati esmalt aku, seejärel päikesepaneel ja lõpuks koormus. Lahtiühendamine toimub vastupidises järjekorras.
• Ärge proovige kontrollerit lahti võtta ega parandada. Teeninduseks võtke ühendust kvalifitseeritud personaliga.
• Paigaldage kontroller hästi ventileeritavasse kohta, eemale tuleohtlikest materjalidest.
• Although the controller has an IP67 waterproof rating, avoid submerging it in water or exposing it to extreme conditions beyond its operating temperature range.
• Veenduge, et süsteem voltage (12V or 24V) matches the controller's auto-detection capability and your battery bank.
• Use appropriate circuit breakers or fuses for the solar panel, battery, and load circuits.

3. Toote lõppview ja komponendid

The SRNE SL2410 controller features a compact design with clearly labeled connection points and indicators.

Figure 2: Diagram showing the main components and indicators of the SRNE SL2410 controller.

Komponendi identifitseerimine:

• Laadimise indikaator: Displays the status of solar charging.
• Aku indikaator: Shows the battery's charge level and status.
• Koormuse indikaator: Indicates the status of the connected load.
• Võti: Kasutatakse menüüdes navigeerimiseks ja valikute kinnitamiseks.
• Režiim: Used for changing operating modes and settings.
• Connection Leads: Pre-wired cables for solar panel, battery, and load connections.
• Temperatuuri andur: External sensor for accurate battery temperature compensation.

4. Seadistamine ja installimine

Proper installation is crucial for the controller's performance and longevity.

4.1 Ühendusskeem

Follow the wiring sequence carefully to avoid damage.

Figure 3: Wiring diagram illustrating connections for the solar panel, battery, and load.

Juhtmete ühendamise etapid:

1. Ühendage aku: Connect the battery's positive and negative terminals to the corresponding battery connection leads on the controller. Ensure correct polarity. The controller will automatically detect the system voltage (12V või 24V).
2. Ühendage päikesepaneel: Connect the solar panel's positive and negative terminals to the corresponding solar panel connection leads on the controller. Ensure correct polarity.
3. Ühendage koormus: Connect the load's positive and negative terminals to the corresponding load connection leads on the controller. Ensure correct polarity.

Tähtis: Always connect the battery first, then the solar panel, and finally the load. Disconnect in the reverse order: load, then solar panel, then battery.

4.2 Paigaldamine

The controller should be mounted in a location that allows for adequate air circulation. Refer to the dimensions below for installation planning.

Figure 4: Installation dimensions for the SRNE SL2410 controller (dimensions in mm).

Kontrolleri mõõtmed: 82mm (length) x 58mm (width) x 20mm (height).

5. Kasutusjuhised

The SRNE SL2410 controller is designed for user-friendly operation with its LED display and waterproof keys.

5.1 LED oleku indikaator

The controller provides visual feedback through its LED indicators:

5.2 Parameetrite sätted

The controller allows for various parameter settings using the 'Mode' and 'Key' buttons. The power-down saving function ensures that your settings are retained even after power loss.

• Aku tüübi valik: The controller supports sealed, GEL, flooded lead-acid, ternary-material lithium, and lithium iron phosphate batteries. Refer to the controller's display and manual for specific steps to select the correct battery type.
• Laadimisrežiimid: Up to 5 load working modes are available, facilitating application to different types of road lamps and monitoring devices. Consult the detailed product documentation for instructions on configuring these modes.
• Temperatuuri kompenseerimine: The external temperature sensor ensures accurate charging voltage adjustments based on ambient temperature, optimizing battery life.

6. Hooldus

The SRNE SL2410 is designed for low maintenance due to its robust IP67 rating and aluminum casing. However, periodic checks are recommended:

• Kontrollige ühendusi: Kontrollige regulaarselt kõiki juhtmestiku ühendusi tiheduse ja korrosiooni suhtes. Lõdvad ühendused võivad põhjustada pinget.tage-tilgad ja ülekuumenemine.
• Puhastage kontroller: While waterproof, ensure the controller's surface is clean from dust and debris to maintain optimal heat dissipation. Use a soft, dry cloth.
• Jälgige jõudlust: Observe the LED indicators regularly to ensure the system is operating normally.

7. Veaotsing

This section provides guidance for common issues. Refer to the LED Status Indication table in Section 5.1 for diagnostic help.

• Toide puudub/ekraan välja lülitatud: Check battery connections. Ensure the battery is charged above the controller's minimum operating voltage.
• No Charging (Charging LED off): Verify solar panel connections and ensure there is sufficient sunlight. Check for system over voltage (quick flashing Charging LED).
• Load Not Working (Load LED off): Check load connections. Ensure the battery is not under voltage (slow flashing Battery LED) or over-discharged (quick flashing Battery LED). Check for overload protection (slow flashing Load LED) or short-circuit protection (quick flashing Load LED).
• Battery Not Connected (Battery LED steady off): Recheck battery wiring and ensure secure connections.
• System Over Voltage (Charging LED quick flashing): Ensure the solar panel's open-circuit voltage does not exceed the controller's maximum input voltage.

If issues persist, consult the manufacturer or a qualified technician.

8. Tehnilised andmed

Technical parameters for the SRNE SL2410 PWM Solar Charge Controller:

9. Garantii ja tugi

Garantiiteabe ja tehnilise toe saamiseks lugege ostuga kaasasolevat dokumentatsiooni või võtke otse ühendust müüja/tootjaga. Hoidke ostutõendina ostutšekk alles.