RAB Lighting B17 LED Bollard Light Instruction Manual

1. Sissejuhatus

This manual provides detailed instructions for the installation, operation, and maintenance of the RAB Lighting B17 LED Bollard Light. This outdoor luminaire features field-adjustable wattage and selectable color temperature (CCT), designed for various outdoor applications.

Põhifunktsioonide hulka kuuluvad:

• Energy-efficient LED with a 50,000-hour lifespan.
• Reguleeritav vattage: 24W, 19W, or 14W.
• Selectable CCT: 3000K (Warm White), 4000K (Neutral White), or 5000K (Cool White).
• 0-10V dimming capability.
• UL loetletud märgade kohtade jaoks.
• Durable metal construction with a glass shade.

Figure 1: RAB Lighting B17 LED Bollard Light (Model B17D shown).

2. Ohutusalane teave

HOIATUS: Elektrilöögi oht. Enne paigaldamist või hooldamist ühendage toide lahti. Paigaldus peaks toimuma kvalifitseeritud elektriku poolt vastavalt kõigile kehtivatele riiklikele ja kohalikele elektrieeskirjadele.

• Veenduge, et toite mahttage is correct for the fixture.
• Do not handle live components.
• Kandke sobivaid isikukaitsevahendeid (PPE).
• This fixture is suitable for wet locations. Ensure all connections are properly sealed to prevent water ingress.
• Ärge muutke seadet. Igasugused muudatused võivad tühistada garantii ja tekitada ohutusriske.

3. Pakendi sisu

Enne paigaldamise alustamist veenduge, et kõik komponendid on olemas:

• B17 LED Bollard Light Fixture
• On-Off Switch (Included Components)
• Installation Hardware (e.g., mounting bolts, gaskets) - (Assumed, not explicitly listed but typical for such products)
• Kasutusjuhend (see dokument)

4. Seadistamine ja installimine

Follow these steps for proper installation of the B17 LED Bollard Light:

1. Valmistage ette paigalduskoht: Ensure the mounting surface is stable and level. Run electrical conduit and wiring to the desired location according to local codes.
2. Toite lahtiühendamine: Enne elektritööde alustamist lülitage kaitselülitist toide välja.
3. Mount the Bollard: Secure the bollard base to the mounting surface using appropriate hardware. Ensure a watertight seal if required by local codes.
4. Tehke elektriühendused: Connect the fixture's wires to the supply wires. Follow standard wiring practices:
   • Black to Line (L)
   • White to Neutral (N)
   • Green/Ground to Ground (G)
   • Purple to Dimming (+) (for 0-10V dimming)
   • Gray to Dimming (-) (for 0-10V dimming)
   Veenduge, et kõik ühendused on turvalised ja isoleeritud.
5. Valige Wattage ja CCT: Before closing the fixture, adjust the wattage and CCT switches located inside the fixture head. Refer to Section 5 for details.
6. Secure the Fixture Head: Attach the fixture head to the bollard body, ensuring all seals are properly seated to maintain the wet location rating.
7. Toite taastamine: Turn on power at the circuit breaker and test the light.

Figure 2: The B17 Bollard Light is UL Listed and rated for wet locations, ensuring durability in outdoor environments.

5. Kasutusjuhised

5.1. Field-Adjustable Wattage

The B17 bollard light allows you to select the desired wattage output to optimize brightness and energy consumption. A switch located inside the fixture head enables selection between 24W, 19W, and 14W.

• 24 W: Maksimaalne heledus.
• 19 W: Medium brightness, reduced energy use.
• 14 W: Lower brightness, maximum energy savings.

Kohandamiseks: Disconnect power. Open the fixture head. Locate the wattage selection switch and move it to the desired setting. Close the fixture head and restore power.

5.2. Selectable Color Temperature (CCT)

The fixture offers three color temperature options to suit different aesthetic preferences and applications. A separate switch inside the fixture head allows selection between 3000K, 4000K, and 5000K.

• 3000K: Warm White, ideal for creating a cozy and inviting atmosphere.
• 4000K: Neutral White, suitable for general illumination and task lighting.
• 5000K: Cool White, provides bright, crisp light, often used for security or modern aesthetics.

Kohandamiseks: Disconnect power. Open the fixture head. Locate the CCT selection switch and move it to the desired setting. Close the fixture head and restore power.

Figure 3: Visual representation of adjustable wattage and selectable CCT settings.

5.3. 0–10 V hämardamine

The B17 bollard light is compatible with 0-10V dimming systems. Connect the purple and gray dimming wires to a compatible 0-10V dimmer control. This allows for smooth adjustment of light output from 100% down to 10% (or lower, depending on dimmer specifications).

Ensure the dimmer is rated for LED loads and is compatible with 0-10V dimming protocols.

6. Hooldus

The B17 LED Bollard Light is designed for minimal maintenance due to its long LED lifespan of 50,000 hours.

• Puhastamine: Puhastage seadme välispinda regulaarselt pehme lapiga.amp cloth to remove dirt and debris. Do not use abrasive cleaners or solvents. Ensure power is off before cleaning.
• Ülevaatus: Annually inspect the fixture for any signs of damage, loose connections, or wear. Ensure all seals remain intact to maintain weather resistance.
• LED-i vahetus: LEDs are integrated and not user-replaceable. The long lifespan minimizes the need for replacement.

Figure 4: The B17 LED Bollard Light offers a long 50,000-hour operational lifespan.

7. Veaotsing

8. Tehnilised andmed

9. Garantii ja tugi

For warranty information and technical support, please contact RAB Lighting directly. Refer to the official RAB Lighting webTäpsemate garantiitingimuste ja kontaktandmete saamiseks külastage veebisaiti või ostudokumentatsiooni.

RAB Lighting Contact: www.rablighting.com