1. Sissejuhatus
This manual provides essential information for the safe and effective use of the FUTABA LBC-34D(P) LiFe Battery Charger. This charger is specifically designed for LiFe (Lithium Iron Phosphate) batteries used in compatible FUTABA radio control transmitters. Please read this manual thoroughly before use to ensure proper operation and to prevent damage to the charger or battery.
Image: The FUTABA LBC-34D(P) LiFe Battery Charger. This image shows the compact design of the charger, typically featuring input and output ports.
2. Ohutusalane teave
Hoiatus: Failure to follow these safety instructions may result in fire, electric shock, injury, or damage to the product or property.
- Use this charger ainult with the designated LiFe transmitter batteries. Using it with other battery types (e.g., LiPo, NiMH, NiCd) can cause severe damage, fire, or explosion.
- Ärge proovige laadida kahjustatud või paisunud akusid.
- Always supervise the charging process. Do not leave batteries unattended while charging.
- Hoidke laadijat vee, niiskuse ja tuleohtlike materjalide eest.
- Do not short-circuit the charger's output terminals or the battery terminals.
- Do not modify, disassemble, or attempt to repair the charger. Refer all servicing to qualified personnel.
- Tagada laadimise ajal korralik ventilatsioon.
- Hoida lastele kättesaamatus kohas.
3. Pakendi sisu
- FUTABA LBC-34D(P) LiFe Battery Charger Main Unit
4. Seadistamine
Follow these steps to set up your LBC-34D(P) charger:
- Ühendage toiteallikaga: Connect the charger's input cable to a stable 12V DC power source. Ensure the power source can provide sufficient current for charging.
- Ühendage aku: Carefully connect your compatible LiFe transmitter battery to the charger's output port. Ensure the polarity is correct. The charger is designed for a 7.2V output.
- Ühenduse kinnitamine: Double-check all connections to ensure they are secure before proceeding.
5. Kasutusjuhised
Once the charger is connected to a power source and the battery is attached:
- The charger will automatically begin the charging process.
- Observe any indicator lights on the charger (if present) to monitor the charging status. Typically, a light may change color or turn off when charging is complete. Refer to the specific indicator behavior for your charger model.
- Once charging is complete, disconnect the battery from the charger, then disconnect the charger from the power source.
6. Ühilduvus
The FUTABA LBC-34D(P) LiFe Battery Charger is compatible with LiFe batteries used in the following FUTABA transmitter models:
CAR Series Transmitters:
- 10 pikslit
- 7PXR
- 7 pikslit
- 7XC
- 4PXR
- 4 pikslit
- 4PKS
- 4PK
- 4:XNUMX
- 4PV
- 4GRS
- 3PV
AIR Series Transmitters:
- 18SZ
- 16SZ
- 14SG
- 12K
- 10J
- 8J
- 6J
- 6K
7. Tehnilised andmed
| Kaubamärk | Futaba Denshi |
| Mudeli number | LBC-34D(P) |
| Toote mõõtmed | 10 x 8 x 2 cm |
| Toote kaal | 95 g |
| Materjal | Plastikust |
| Sisend Voltage | 12 V |
| Väljund Voltage | 7.2 V |
| Kaasatud komponendid | Peaüksus |
8. Hooldus
To ensure the longevity and proper functioning of your LBC-34D(P) charger:
- Puhastamine: Disconnect the charger from all power sources and batteries before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or solvents.
- Hoiustamine: Hoidke laadijat jahedas ja kuivas kohas, kaitstuna otsese päikesevalguse ja äärmuslike temperatuuride eest.
- Ülevaatus: Periodically inspect the charger and its cables for any signs of damage, such as frayed wires or cracked casing. Ärge kasutage, kui toode on kahjustatud.
9. Veaotsing
Kui teil tekib laadijaga probleeme, kaaluge järgmist.
- Laadija ei lülitu sisse: Ensure the 12V DC power source is functioning correctly and the input cable is securely connected.
- Akut ei laeta:
- Verify that the battery is a compatible LiFe type.
- Check that the battery is correctly connected to the charger with proper polarity.
- Inspect the battery for any visible damage. Do not attempt to charge damaged batteries.
- Unusual Heat or Smell: Immediately disconnect the charger from the power source and battery. Do not use the charger or battery if you notice excessive heat, smoke, or an unusual smell.
If problems persist after checking these points, contact customer support for assistance.
10. Garantii ja tugi
For warranty information, please refer to the documentation provided at the time of purchase or visit the official FUTABA website. For technical support or inquiries, please contact your retailer or the manufacturer's customer service department.
