onerbl AC-DC adapteri asendus CAT Cube PPSCL3 1750A käivitusabile, kasutusjuhend

1. Sissejuhatus

This manual provides essential instructions for the safe and effective use of your onerbl AC-DC Adapter. This adapter is designed as a replacement power supply for the CAT Cube PPSCL3 1750A 4-in-1 Portable Jump Starter Power Station, which includes a tire air compressor. Please read this manual thoroughly before operating the device to ensure proper function and longevity.

2. Ohutusalane teave

Always observe the following safety precautions when using electrical adapters:

• Ainult siseruumides kasutamiseks: This adapter is intended for indoor use in dry locations. Do not expose it to rain, moisture, or extreme temperatures.
• Proper Voltage: Veenduge, et seinakontakti voltage matches the adapter's input specifications (AC 100-240V).
• Vältige ülekoormust: Do not overload the power outlet or extension cords.
• Kontrollige kahjustusi: Before each use, inspect the adapter and its cables for any signs of damage. Do not use if damaged.
• Ühendage ohutult lahti: Always grasp the plug, not the cord, when disconnecting from the power outlet.
• Hoida lastest eemal: Store the adapter out of reach of children.
• Ventilatsioon: Ensure adequate ventilation around the adapter during use to prevent overheating.
• Lühisekaitse: This adapter features short circuit protection. However, avoid intentionally short-circuiting the output.

3. Toote komponendid

The onerbl AC-DC Adapter package typically includes the following components:

• 1 x AC-DC Wall Power Adapter
• 2 x USB Cable (as indicated in packaging)

Image 1: The onerbl AC-DC Adapter (right) and a USB cable (left). The adapter is a black rectangular block with a USB-A output port and standard US wall prongs. The cable features a USB-A connector on one end and a micro-USB connector on the other.

4. Seadistamine

Follow these steps to set up your AC-DC Adapter:

1. Pakkige lahti: Eemaldage ettevaatlikult kõik komponendid pakendist.
2. Kontrollige: Check the adapter and cables for any visible damage.
3. Ühenda: Insert the appropriate charging cable (e.g., the cable supplied with your CAT Cube PPSCL3) into the USB output port of the onerbl AC-DC Adapter.
4. Ühendage: Plug the AC-DC Adapter into a standard AC 100-240V wall power outlet.
5. Ühendage seadmega: Connect the other end of the charging cable to the charging input port of your CAT Cube PPSCL3 1750A Jump Starter.

5. Kasutusjuhised

Once connected, the adapter will begin to supply power or charge your compatible device:

• The adapter converts AC wall power to DC power suitable for your device.
• Refer to your CAT Cube PPSCL3 1750A Jump Starter's manual for specific charging indicators and times.
• Disconnect the adapter from the wall outlet and your device once charging is complete or when the device is not in use.

6. Hooldus

To ensure optimal performance and longevity of your adapter:

• Puhastamine: Disconnect the adapter from power before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or solvents.
• Hoiustamine: Store the adapter in a cool, dry place when not in use. Avoid wrapping cables too tightly.
• Vältige füüsilist stressi: Do not drop, bend, or apply excessive force to the adapter or its cables.

7. Veaotsing

If you encounter issues with your onerbl AC-DC Adapter, consider the following:

• Toiteväljund puudub:
  • Veenduge, et adapter oleks kindlalt töötavasse seinakontakti ühendatud.
  • Kontrollige seinakontakti toimimist, ühendades sellega teise seadme.
  • Verify that the charging cable is properly connected to both the adapter and your device.
• Aeglane laadimine:
  • Confirm that your device is compatible with the adapter's output specifications (2A, 24W).
  • Ensure the charging cable is not damaged and is suitable for fast charging if your device supports it.
• Ülekuumenemine:
  • Disconnect the adapter immediately.
  • Ensure the adapter is not covered and has adequate ventilation.
  • Kui ülekuumenemine püsib, lõpetage kasutamine ja võtke ühendust toega.

Kui probleemid pärast nende sammude proovimist püsivad, võtke ühendust klienditoega.

8. Tehnilised andmed

9. Garantii ja tugi

For warranty information or technical support, please refer to the documentation provided with your purchase or contact onerbl customer service through the retailer where the product was acquired. Keep your purchase receipt as proof of purchase.

Tootja: Shenzhen Waweis Technology Co., Ltd.