Topaz RTL4-SQ-7W-CS-WH 4-inch Performance LED Recessed Retrofit Downlight Instruction Manual

1. Oluline ohutusteave

Please read and understand all instructions before beginning installation. Failure to follow these instructions may result in electric shock, fire, or other hazards that could cause property damage or personal injury.

• HOIATUS: Elektrilöögi oht. Enne paigaldamist või hooldamist ühendage kaitsme või kaitselüliti toide lahti.
• HOIATUS: Risk of fire. Minimum 90°C supply conductors. Consult a qualified electrician to ensure correct branch circuit conductor.
• Selle toote peab paigaldama vastavalt kehtivale paigalduskoodile isik, kes on kursis toote ehituse ja kasutamisega ning sellega seotud ohtudega.
• Sobib niisketesse kohtadesse.
• Ärge tehke ega muutke komplekti paigaldamise ajal juhtmestiku või elektrikomponentide korpusesse lahtisi auke.
• Juhtmete kahjustamise või hõõrdumise vältimiseks ärge jätke juhtmeid lehtmetalli servade või muude teravate esemete kätte.

2. Toote lõppview

The Topaz RTL4-SQ-7W-CS-WH is a 4-inch square LED recessed retrofit downlight designed for both new construction and existing recessed housings. It features a CCT (Correlated Color Temperature) selectable switch, allowing users to choose from five color temperature options. This 7-watt LED fixture provides 90 CRI quality lighting and is dimmable.

Peamised omadused:

• Retrofit trim for 4-inch recessed housings.
• CCT field selectable switch to adjust between 5 color temperatures (2700K, 3000K, 3500K, 4000K, 5000K).
• Square baffle trim with a durable white finish.
• Dimmable LED functionality.
• High Color Rendering Index (CRI) of 90.
• Sobib niisketesse kohtadesse.

3. Pakendi sisu

Enne paigaldamise alustamist veenduge, et kõik komponendid on olemas:

• 1 x Topaz RTL4-SQ-7W-CS-WH LED Recessed Downlight
• 1 x E26 adapter
• Kiirühendused

Image 1: The Topaz 4-inch square LED downlight shown with its included E26 adapter, ready for installation.

4. Seadistamine ja installimine

4.1 Eelinstallimine

Before starting, ensure you have the following tools and materials:

• Kruvikeeraja
• Traadieemaldajad (vajadusel)
• Kaitseprillid
• Kindad
• Existing 4-inch recessed housing

4.2 Paigaldamise etapid

1. Lülitage toide välja: Locate the circuit breaker or fuse box and turn off the power supply to the recessed lighting fixture you are replacing or installing. Verify power is off using a voltage testija.
2. Remove Existing Trim (if applicable): Carefully remove the existing bulb and trim from the recessed housing.
3. Ühendage E26 adapter: Screw the E26 adapter into the existing E26 socket within the recessed housing.
4. Connect Quick Connects: Plug the quick connect cable from the LED downlight into the quick connect cable from the E26 adapter. Ensure a secure connection.
5. Select CCT (Color Temperature): Before inserting the downlight into the housing, locate the CCT selectable switch on the back of the fixture. Choose your desired color temperature (2700K, 3000K, 3500K, 4000K, or 5000K) by sliding the switch.


Image 2: The back of the Topaz LED downlight showing the CCT selection switch and the connected E26 adapter. The friction clips are also visible.

6. Sisesta allvalgusti: Gently push the LED downlight into the 4-inch recessed housing. The friction clips on the sides of the downlight will secure it in place. Ensure the trim is flush with the ceiling.
7. Toite taastamine: Lülitage kaitselüliti või kaitsmekarbi kaudu toide uuesti sisse.
8. Test: Lülitage valguslüliti sisse, et kontrollida selle õiget toimimist.

5. Kasutusjuhised

5.1 CCT Color Selection

The Topaz RTL4-SQ-7W-CS-WH features a CCT selectable switch located on the back of the fixture. This switch allows you to choose from five different color temperatures to suit your preference or application:

• 2700K: Warm White (similar to incandescent)
• 3000K: Pehme valge
• 3500K: Neutraalne valge
• 4000K: Lahe valge
• 5000K: Päevavalgus

To change the CCT, you must first remove the fixture from the recessed housing and then slide the switch to the desired setting. Reinstall the fixture after selection.

Pilt 3: Lähivõte view of the CCT selection switch on the back of the downlight, showing the five selectable color temperature options.

5.2 Hämardusfunktsioon

This LED downlight is dimmable. For optimal performance, use with compatible LED-rated dimmers. Refer to your dimmer's instructions for proper installation and operation. Ensure the dimmer is suitable for LED loads.

6. Hooldus

The Topaz RTL4-SQ-7W-CS-WH LED downlight requires minimal maintenance.

• Puhastamine: Enne puhastamist veenduge, et seade on välja lülitatud. Pühkige seadet pehme, kuiva või kergelt kuiva lapiga.amp lapiga. Ärge kasutage tugevaid kemikaale, abrasiivseid puhastusvahendeid ega lahusteid, kuna need võivad kahjustada viimistlust või elektrilisi komponente.
• Kasutaja poolt hooldatavaid osi pole: There are no user-serviceable parts inside this fixture. Do not attempt to disassemble the unit.

7. Veaotsing

If the fixture does not operate correctly, refer to the following troubleshooting guide:

If the problem persists after attempting these solutions, contact a qualified electrician or the manufacturer's support.

8. Tehnilised andmed

9. Garantii ja tugi

This product is manufactured by Topaz and is subject to their standard warranty terms and conditions. Please refer to the official Topaz website or contact their customer service for detailed warranty information.

For technical assistance, troubleshooting, or warranty claims, please contact Topaz customer support directly. Contact information can typically be found on the manufacturer's websait või toote pakend.