Toode läbiview
The Valeton VPS-6 is a fully isolated power supply designed for guitar and bass effects pedals. It provides clean, reliable power with extremely low noise, ensuring optimal performance for your pedalboard. Each output features double isolation to prevent unwanted noise interference. The unit offers a versatile range of power options, including fixed 9V DC outputs and adjustable outputs for 9V, 12V, or 18V DC, accommodating a wide variety of pedals.
Pilt: Ülalt-alla view of the Valeton VPS-6 Fully Isolated Power Supply, showcasinselle kompaktne must metall casing and clearly labeled output ports.
Põhifunktsioonid
- Fully Isolated Outputs: 6 high-current, fully isolated outputs with center-negative polarity to eliminate ground loop noise.
- Mitmekülgsed toitevalikud: 4 dedicated 9V DC outputs (500mA each) and 2 adjustable outputs offering 9V (500mA), 12V (375mA), or 18V (250mA) DC options.
- Laiendatav võimsus: Includes a DC 24V OUT (1500mA) for expanding your power supply system with other compatible products.
- Comprehensive Cable Set: Comes with 9 power cables (various lengths and angles), an IEC power cable, a 9V battery connection cable, and a polarity reversal cable.
- LED indikaatorid: Each output is equipped with an LED indicator light that illuminates red when a pedal is connected and turns off if the cable is unplugged or the device is short-circuited. Blinks for overcurrent.
- Tugev konstruktsioon: Energy-efficient, compact design with 6 independent customized transformers for clean and reliable power. Wide-range voltage input (100V-240V) for worldwide compatibility.
Mis on karbis
- Valeton VPS-6 Fully Isolated Power Supply Unit
- IEC toitekaabel
- 9V Battery Connection Cable
- Polarity Reversal Cable
- 9 DC Power Cables (6x 9V 60cm straight to right-angled, 1x 9V 30cm straight to right-angled, 1x 9V 90cm straight to right-angled, 1x 24V 60cm straight to straight-angled)
Seadistusjuhised
- Ühendage vahelduvvool: Connect the included IEC cable to the VPS-6 unit and plug the other end into a standard AC power outlet (100V-240V, 50-60Hz). The unit will automatically adapt to the voltage.
- Connect 9V DC Pedals: For standard 9V DC, center-negative pedals, use the provided 9V cables to connect them to outputs 1-4. Each of these outputs provides 500mA.
- Connect Adjustable Voltage Pedals: For pedals requiring 9V, 12V, or 18V DC, use outputs 5 and 6. Ensure the correct voltage is selected for your pedal.
- 9V: 500mA
- 12V: 375mA
- 18V: 250mA
Always confirm the recommended voltage, polarity, and current requirements of your pedals before connecting them to avoid damage.
- Expand Power (Optional): If you need to power additional compatible power supply products, use the 24V DC OUT (1500mA, center-positive) port.
- Monitori ühendused: Observe the LED indicators next to each output. A red light indicates a successful connection and power delivery.
Pilt: Lähivõte view of the Valeton VPS-6 output ports, showing the fixed 9V outputs and the adjustable 9V/12V/18V outputs with their respective LED indicators.
Kasutusjuhised
Once all pedals are connected and the unit is powered, the VPS-6 will automatically supply power. There is no separate on/off switch for the outputs; power is delivered as long as the unit is connected to AC power and the output cables are properly inserted into pedals.
LED indikaatorid:
- Ühtlane punane: Indicates normal operation and power delivery to the connected pedal.
- Väljas: The output cable is unplugged, or the connected device is short-circuited.
- Vilkuv punane: The current draw on the output exceeds the maximum amount available (overcurrent protection).
Video: Üleview of the Valeton VPS-6, demonstrating its features and connectivity for powering guitar and bass effects pedals.
Tehnilised andmed
| Kauba kaal | 2.24 naela |
| Toote mõõtmed | 6.22 x 3.86 x 1.26 tolli |
| Kauba mudeli number | VPS6 |
| Värv | Must |
| Materjali tüüp | Metall, Plastik |
| Sisend Voltage | 100V-240V AC, 50-60Hz |
| Väljund 1-4 | 9V DC, 500mA (Center Negative) |
| Output 5-6 (Adjustable) | 9V DC (500mA), 12V DC (375mA), 18V DC (250mA) (Center Negative) |
| DC 24V VÄLJUND | 1500mA (Center Positive) |
Veaotsing
- Toidet pole / LED ei põle:
- Check if the IEC power cable is securely connected to both the VPS-6 and the AC outlet.
- Ensure the output cable is firmly plugged into both the VPS-6 and the pedal.
- If the LED remains off, the connected pedal might be short-circuited. Disconnect the pedal and test with another known working pedal.
- LED Blinking Red (Overcurrent):
- This indicates the current draw of the connected pedal exceeds the maximum output of that port.
- Verify the current requirements of your pedal against the output specifications.
- If using an adjustable output (5 or 6), ensure the correct voltage is selected, as higher voltages provide less current.
- Disconnect the pedal causing the overcurrent. The power supply will enter hiccup protection status and the LED will blink. After troubleshooting, the power will return to normal and the LED will be solid red.
- Müraprobleemid:
- The VPS-6 features fully isolated outputs to minimize noise. If you experience noise, ensure all connections are secure.
- Verify that all pedals are connected to outputs matching their voltage and polarity requirements. Incorrect connections can sometimes introduce noise.
Hooldus
Keep the unit clean and free from dust. Avoid exposing the unit to moisture or extreme temperatures. Do not attempt to open or service the unit yourself, as this may void the warranty and poses a risk of electric shock. Refer all servicing to qualified personnel.
Garantii ja tugi
For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official Valeton webveebisait. Hoidke ostutõendit alles garantiinõuete esitamiseks.