1. Sissejuhatus
The RAINPOINT 4 Outlets Hose Timer is an advanced irrigation controller designed to simplify your watering tasks. Featuring four individually programmable zones, it allows for customized watering schedules tailored to different areas of your garden or lawn. This timer supports automatic, timed, and manual watering modes, along with a convenient rain delay function to conserve water. Its robust, weatherproof construction ensures durability for outdoor use.

Joonis 1: Esiosa view of the RAINPOINT 4 Outlets Hose Timer, showing the LCD display, control dial, and four hose outlets.
2. Ohutusalane teave
- Ensure the timer is securely attached to the faucet to prevent accidental detachment or damage.
- Use only 4 AA alkaline batteries (not included). Do not mix old and new batteries, or different types of batteries.
- Replace batteries promptly when the low power indicator flashes to avoid interruption of watering schedules and automatic valve closure.
- Protect the timer from freezing temperatures by removing it from the faucet and draining all water before winter.
- Do not disassemble or attempt to repair the unit yourself. Refer to the troubleshooting section or contact customer support.
- Ensure all connections are tight to prevent leaks. Periodically check washers and replace if worn.
3. Toote lõppview
The RAINPOINT 4 Outlets Hose Timer features a user-friendly design with a large LCD display and intuitive controls.
Põhikomponendid:
- LCD ekraan: Large 3.3-inch screen for clear visibility of settings and current status.
- Juhtvalik: Rotary dial for easy navigation between different programming modes (ON, OFF, Set Clock, Start Time, How Long, How Often).
- Nupud: OK/Manual, +/Delay, -, Zone buttons for precise adjustments and mode activation.
- 4 müügikohta: Individual outlets for connecting up to four hoses, allowing for independent zone control.
- Messingist sisselaskeava: Durable brass water inlet for secure connection to the faucet.

Figure 2: Illustration of the 4 programmable outlets, highlighting that only one valve can be open at a time for optimal performance.

Figure 3: Close-up of the large LCD display and control dial, demonstrating the ease of programming.
4. Seadistamine
4.1 Aku paigaldamine
- Leidke taimeri tagaküljel olev patareipesa.
- Lükake aku kate lahti.
- Sisestage 4 uut AA-tüüpi leelispatareid, jälgides õiget polaarsust (+/-).
- Close the battery cover securely to maintain its waterproof seal.

Figure 4: The waterproof battery cover, ensuring protection against outdoor elements.
4.2 Connecting to Faucet and Hoses
- Screw the timer's brass inlet onto your 3/4-inch outdoor faucet. Hand-tighten firmly to prevent leaks.
- Connect your garden hoses to the four individual outlets at the bottom of the timer. Ensure each connection is tight.
- For added stability, especially with heavier hoses, utilize the reinforced column and consider securing the timer with a metal rod at the back (as shown in Figure 5).

Figure 5: The heavy-duty structure of the timer, illustrating secure mounting to a wooden post with a metal rod for stability.
5. Kasutusjuhised
The RAINPOINT 4 Outlets Hose Timer offers flexible programming options for automatic, manual, and rain delay watering.
5.1 Kella seadistamine
To set the current time on your timer:
- Turn the control dial to "SET CLOCK".
- Tunni reguleerimiseks kasutage nuppe "+" või "-".
- Press "OK/Manual" to confirm the hour and move to minutes.
- Minutite reguleerimiseks kasutage nuppe "+" või "-".
- Press "OK/Manual" to confirm.
- Turn the dial to "ON" to save the settings.
5.2 Setting Automatic Watering Schedule
You can program up to four independent watering zones. Each zone can have its own start time, duration, and frequency.

Figure 6: Visual representation of the flexible watering cycle modes, including start time, duration, and frequency settings.
1. samm: määrake algusaeg
- Turn the control dial to "START TIME".
- Use the "+" or "-" buttons to adjust the desired start hour. Press and hold for quick adjustment.
- Press "OK/Manual" to confirm the hour and move to minutes.
- Minutite reguleerimiseks kasutage nuppe "+" või "-".
- Press "OK/Manual" to confirm.
- Press the "ZONE" button to switch to another zone (1-4) and repeat the process for each desired zone.
Step 2: Set How Long (Watering Duration)
- Turn the control dial to "HOW LONG".
- Use the "+" or "-" buttons to set the watering duration from 1 minute to 3 hours 59 minutes. Press and hold for quick adjustment.
- Press "OK/Manual" to confirm.
- Press the "ZONE" button to switch to another zone (1-4) and repeat the process.
Step 3: Set How Often (Watering Frequency)
- Turn the control dial to "HOW OFTEN".
- Use the "+" or "-" buttons to set the frequency: every 1-12 hours, or every 1-7 days.
- Press "OK/Manual" to confirm.
- Press the "ZONE" button to switch to another zone (1-4) and repeat the process.
- Once all settings are complete, turn the control dial to "ON" to activate the automatic watering schedule.
Video 1: Detailed guide on setting the start time, watering duration, and frequency for the RAINPOINT Sprinkler Timer.
5.3 Käsitsi kastmine
The manual watering mode allows for immediate, unscheduled watering without affecting your programmed schedules.
- Ensure the control dial is set to "ON".
- Press and hold the "OK/Manual" button for 3 seconds until "MANUAL" appears on the screen.
- Use the "ZONE" button to select the desired watering zone (1-4) or "BOTH" for all active zones.
- Use the "+" or "-" buttons to set the manual watering duration (from 1 minute to 8 hours).
- Press "OK/Manual" to confirm and start manual watering.
- To stop manual watering, turn the dial to "OFF" or press "OK/Manual" again.

Figure 7: The manual watering feature in action, allowing for flexible, on-demand watering.
5.4 Vihma viivitusfunktsioon
The rain delay feature allows you to pause your watering schedule for a set period, preventing overwatering during rainy weather.
- Ensure the control dial is set to "ON".
- Press and hold the "+/DELAY" button for 3 seconds. The screen will show "DELAY" and the default delay time.
- Use the "+" or "-" buttons to select the desired delay duration (24, 48, or 72 hours).
- Press "OK/Manual" to confirm the rain delay. The timer will resume its schedule automatically after the delay period.
- To cancel rain delay, press and hold "+/DELAY" again for 3 seconds.

Figure 8: The rain delay feature, offering options for 24, 48, or 72-hour pauses in watering.
6. Hooldus
6.1 Filtri puhastamine
A clogged filter can reduce water flow. Regular cleaning is recommended.
- Keerake taimer kraani küljest lahti.
- Locate the filter screen inside the brass inlet.
- Carefully remove the filter screen.
- Rinse the filter under running water to remove any debris. For stubborn clogs, use a small brush.
- Reinsert the clean filter screen and reattach the timer to the faucet.
6.2 Aku vahetamine
When the low power indicator flashes on the display, it's time to replace the batteries. This ensures continuous operation and prevents unexpected valve closures.
- Avage patareipesa.
- Eemaldage vanad patareid.
- Insert 4 new AA alkaline batteries, observing polarity.
- Sulgege aku kaas kindlalt.
6.3 Talvistumine
To prevent damage from freezing temperatures, remove the timer from the faucet before the first frost.
- Disconnect the timer from the faucet and all hoses.
- Tühjendage taimerist järelejäänud vesi.
- Hoidke taimerit siseruumides kuivas ja külmavabas kohas.
7. Veaotsing
Levinud probleemide ja nende lahenduste kohta vaadake allolevat tabelit.
| Probleem | Võimalik põhjus | Lahendus |
|---|---|---|
| Timer outlet not working. | Multiple zones set with overlapping working times. The four outlets run one by one. | Ensure no two outlets have repeated working hours. Adjust schedules so zones water sequentially. |
| Taimer lekib. | Washer in the inlet is too loose or too tight, or is worn out. | Adjust the washer properly. If worn, replace it regularly. Ensure all connections are tight. |
| Water flow is smaller than before. | Foreign matter blocking the filter. | Regularly clean the filter screen located inside the brass inlet. |
| Screen keeps flashing and not working. | Aku tühi. | Replace all 4 AA batteries with new ones. Restart the machine. |
Video 4: Common questions and answers regarding the RAINPOINT Sprinkler Timer, including issues with outlets, leaks, and screen flashing.
8. Tehnilised andmed
- Kaubamärk: VIHMAPOINT
- Mudel: Sky Blue 4 outlets (B0DLFJNJF8)
- Värv: Taevasinine
- Toote mõõtmed: 7" P x 8" L x 4.5" K
- Kauba kaal: 2 naela
- Seadete arv: 8 (referring to programmable cycles)
- Ekraani suurus: 3.3 tolli
- Vee rõhk: Kuni 116 PSI
- Toiteallikas: 4 AA patareid (ei kuulu komplekti)
- Kastmise kestus: 1 minutit kuni 3 tundi 59 minutit
- Kastmise sagedus: Iga 1-12 tunni või 1-7 päeva järel
9. Garantii ja tugi
RAINPOINT products are designed for durability and performance. For warranty information, technical support, or any inquiries regarding your sprinkler timer, please refer to the contact details provided in your product packaging or visit the official RAINPOINT websaidile. Hoidke ostutšekk alles garantiinõuete esitamiseks.





