Sissejuhatus
The Pro-Ject T1 Evo Phono Turntable is designed to deliver high-fidelity audio for vinyl enthusiasts. This model features a built-in phono pre-amplifier, allowing for direct connection to various audio systems. It comes equipped with an Ortofon OM 10 moving magnet cartridge, pre-aligned for optimal performance. The turntable's plinth is CNC-machined, avoiding plastic components to minimize resonant hollow spaces, ensuring pure sound reproduction. An elegant dust cover with adjustable hinges and a low-capacitance Connect it Phono E RCA cable are included for convenience and quality.
Seadistusjuhend
1. Lahtipakkimine ja paigutamine
Eemaldage pakendist ettevaatlikult kõik komponendid. Asetage plaadimängija stabiilsele ja tasasele pinnale, eemal otsesest päikesevalgusest, soojusallikatest ja liigsest vibratsioonist. Tagage seadme ümber piisav ventilatsioon.
Figure 1: Pro-Ject T1 Evo Phono Turntable with dust cover open.
Figure 2: Pro-Ject T1 Evo Phono Turntable with dust cover closed, protecting the components.
2. Kokkupanek
- Asetage plaat spindlile.
- Carefully place the felt mat on top of the platter.
- Attach the dust cover by aligning its hinges with the slots on the turntable's base.
3. Ühendused
Connect the included RCA cable from the turntable's output to an available input on your amplifier or powered speakers. Since this model has a built-in phono pre-amplifier, you can connect it directly to a line-level input (e.g., AUX, CD, Line In). Ensure the ground wire is connected from the turntable to your ampEluri maandusklemm müra minimeerimiseks.
Figure 3: Rear connections for RCA output and ground wire.
Connect the power adapter to the turntable and then to a wall outlet.
Kasutusjuhised
1. Toide sisse/välja
Locate the power switch on the side of the turntable. Flip the switch to the 'On' position to power on the unit. The platter will begin to rotate. Flip to 'Off' to power down.
Joonis 4: Toitelüliti asukoht.
2. Plaadi esitamine
- Ensure the dust cover is open or removed.
- Place your vinyl record onto the felt mat on the platter.
- Carefully remove the stylus protector from the cartridge.
- Tõstke toonõla tõstekangi abil üles.
- Gently move the tonearm over the desired starting groove of the record.
- Lower the tonearm using the tonearm lift lever. The stylus will gently descend onto the record, and playback will begin.
- To stop playback, lift the tonearm using the lever and return it to its rest.
Figure 5: Tonearm and Ortofon OM 10 cartridge.
Figure 6: Ortofon OM 10 cartridge detail.
3. Bluetooth-ühenduvus
The T1 Evo Phono Turntable supports Bluetooth connectivity for wireless audio streaming to compatible Bluetooth speakers or headphones. Refer to your Bluetooth device's manual for pairing instructions. The turntable will automatically attempt to connect to previously paired devices when powered on.
Hooldus
1. Plaadimängija puhastamine
- Wipe the plinth and dust cover with a soft, dry, lint-free cloth. Do not use abrasive cleaners or solvents.
- For the acrylic dust cover, use a specialized acrylic cleaner to prevent scratches.
2. Pliiatsihooldus
- Kontrollige regulaarselt puutepliiatsit tolmu ja prahi suhtes.
- Use a soft stylus brush, brushing gently from back to front, to remove any accumulated particles.
- Replace the stylus when sound quality degrades or after approximately 1,000 hours of playback.
Veaotsing
| Probleem | Võimalik põhjus | Lahendus |
|---|---|---|
| Heli puudub või on väga vaikne | Vale sisendi valik on sisse lülitatud amplifier; loose cables; volume too low. | Tagada amplifier input matches turntable connection (e.g., Line In); check all cable connections; increase volume. |
| Sumisev heli | Maandusjuhe pole ühendatud; häirivad teised elektroonikaseadmed. | Connect the ground wire securely; move turntable away from other electronic devices. |
| Hüppav või moonutatud heli | Dirty or worn stylus; record is dirty or damaged; turntable not level. | Clean the stylus; clean the record; ensure turntable is on a level surface; replace stylus if worn. |
| Vaagen ei pöörle | Power not connected; power switch off. | Check power connection; ensure power switch is in the 'On' position. |
Tehnilised andmed
| Funktsioon | Detail |
|---|---|
| Toote mõõtmed | 13.19 x 16.34 x 3.94 tolli |
| Kauba kaal | 14.92 naela |
| ASIN | B0DHTXH32G |
| Kauba mudeli number | T1 Evo with Preamp |
| Tootja | Pro-Ject |
| Kaubamärk | Pro-Ject |
| Ühenduvustehnoloogia | Juhtmega |
| Maksimaalne pöörlemiskiirus | 45 pööret minutis |
| Erifunktsioon | Reguleeritav kiirus |
| Stiil | Sisseehitatud eelamp |
| Värv | Satiinvalge |
| Mudeli nimi | T1 Evo with Preamp |
| Signaali-müra suhe | 70 dB |
| Esmakordselt saadaval olev kuupäev | 24. september 2024 |
Garantii ja tugi
Garantii teave
This Pro-Ject T1 Evo Phono Turntable comes with a standard manufacturer's warranty. Please refer to the warranty card included in your product packaging for specific terms, conditions, and duration. Retain your proof of purchase for warranty claims.
Klienditugi
For technical assistance, troubleshooting beyond this manual, or service inquiries, please contact Pro-Ject customer support. Visit the official Pro-Ject webkontaktandmete ja lisaressursside saamiseks külastage veebisaiti.
Note: Always ensure to use genuine Pro-Ject replacement parts and accessories to maintain product performance and warranty validity.
