Globo Lighting BOSTON Outdoor Pedestal Light

1. Sissejuhatus

Thank you for choosing the Globo Lighting BOSTON Outdoor Pedestal Light. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions carefully before installation and retain them for future reference.

Image 1.1: The BOSTON outdoor pedestal light providing illumination along a pathway.

2. Ohutusjuhised

• Elektriohutus: Installation must be performed by a qualified electrician in accordance with all local and national electrical codes. Always disconnect power at the main circuit breaker before installation, maintenance, or bulb replacement.
• Välistingimustes kasutamine: This fixture is designed for outdoor use. Ensure all connections are waterproof and sealed appropriately to prevent water ingress.
• Lambi tüüp: Use only E27 bulbs with the specified wattage. Ärge ületage maksimaalset võimsusttage on näidatud kinnitusel.
• Käitlemine: Käsitsege valgustit ettevaatlikult. Vältige selle maha kukkumist või tugevate löökide saamist.
• Puhastamine: Do not use abrasive cleaners or solvents. Clean with a soft, damp riie.
• Kuumus: Allow the bulb to cool completely before attempting to replace it.

3. Pakendi sisu

Please check that all components are present and undamaged before beginning installation:

• 1x BOSTON Outdoor Pedestal Light Fixture (Model 105701)
• 1x paigaldusalus
• 1x Set of Mounting Hardware (screws, anchors)
• 1x kasutusjuhend

Note: E27 bulb is not typically included and must be purchased separately.

4. Tehnilised andmed

5. Seadistamine ja installimine

Tähtis: Ensure the main power supply is switched off at the circuit breaker before commencing installation.

1. Vali asukoht: Select a suitable outdoor location for the pedestal light, ensuring it is on a stable, level surface and has access to the necessary electrical wiring.
2. Juhtmestiku ettevalmistamine: If not already present, run appropriate outdoor-rated electrical cable to the installation point. Consult a qualified electrician for this step.
3. Paigaldage alus: Position the mounting base on the desired surface. Mark the drilling points through the holes in the base. Drill pilot holes and secure the base using the provided mounting hardware (screws and anchors). Ensure the base is firmly attached.
4. Ühendage elektrijuhtmed: Carefully connect the electrical wires from your power supply to the terminals inside the fixture. Follow the standard wiring color codes (e.g., Live, Neutral, Earth). Ensure all connections are secure and properly insulated.
5. Paigaldage pirn: Insert a suitable E27 bulb (not included) into the lamp hoidja. Ärge pingutage üle.
6. Turvaline kinnitus: Attach the main body of the pedestal light to the mounted base, ensuring it is securely fastened and sealed against moisture.
7. Toite taastamine: Kui paigaldamine on lõppenud ja kõik ühendused on kindlad, taastage peakaitselüliti vool.

Image 5.1: The pedestal light installed on a patio, demonstrating a typical mounting scenario.

6. Kasutusjuhised

The BOSTON Pedestal Light features an integrated motion sensor for automatic operation.

• Toide sisse: Once installed and power is restored, the light will enter a warm-up period (typically a few seconds) before the motion sensor becomes active.
• Liikumisandur: The integrated motion sensor detects movement within its detection range. When motion is detected, the light will illuminate.
• Automaatne väljalülitus: After a period of no detected motion, the light will automatically turn off. The duration of illumination is typically pre-set or adjustable via controls on the sensor (if available). Refer to the sensor's specific markings for adjustment options.
• Day/Night Sensor: The motion sensor also includes a photocell that prevents the light from activating during daylight hours, conserving energy. The light will only activate due to motion when ambient light levels are low enough.

Image 6.1: Detail of the motion sensor on the pedestal light, highlighting its detection area.

Image 6.2: The pedestal light operating at night, with the motion sensor detecting movement.

7. Hooldus

• Puhastamine: Puhastage seadet regulaarselt pehme, damp cloth to remove dirt and debris. Do not use harsh chemicals or abrasive materials, as these can damage the finish or plastic components.
• Pirni vahetus:
  1. Ensure the power supply to the fixture is turned off at the circuit breaker.
  2. Allow the old bulb to cool completely before touching it.
  3. Carefully unscrew the top cover or access panel to reach the E27 bulb.
  4. Unscrew the old bulb and replace it with a new E27 bulb of the correct wattage.
  5. Securely reattach the cover or access panel, ensuring a watertight seal.
  6. Taasta toide.
• Ülevaatus: Periodically inspect the fixture for any signs of wear, damage, or loose connections. Address any issues promptly to ensure continued safe operation.

8. Veaotsing

If you experience persistent issues not covered here, please contact a qualified electrician or the product supplier.

9. Garantii ja tugi

This product is covered by the standard warranty provided by the manufacturer. Please retain your proof of purchase for any warranty claims. For technical support or further assistance, please contact your retailer or the Globo Lighting customer service department.

Kontaktandmed leiate tavaliselt toote pakendilt või tootja ametlikult kontaktandmetelt. websaidile.