Sissejuhatus
This manual provides comprehensive instructions for the installation, operation, and maintenance of your ECOELER YWT102 Countdown Timer Switch. This in-wall timer switch is designed to automatically turn off connected loads such as lights, ceiling fans, bathroom fans, and heaters after a preset time, contributing to energy savings and convenience. It features multiple preset countdown options and a manual override function.

Image: The ECOELER Countdown Timer Switch in Ivory, shown as a 2-pack.
Toote omadused
- 8 Pre-Set Options: Offers countdown settings of 1 minute, 5 minutes, 10 minutes, 15 minutes, 30 minutes, 60 minutes, 2 hours, or 4 hours.
- Käsitsi tühistamine: Allows instant ON/OFF control, overriding any active countdown.
- Energiasääst: Automatically turns off loads, preventing accidental energy waste. Ideal for lights, ceiling fans, bathroom fans, and heaters.
- Lihtne toiming: Features Countdown mode and Constant On mode. Select time with a button press; hold ON/OFF for 5 seconds to activate Constant On.
- LED indikaator: An always-on LED light makes the switch easy to locate in low-light conditions.
- Lai rakendus: Suitable for bathrooms, closets, pantries, garages, laundry rooms, spas, and enclosed patios.
- Ohutu ja usaldusväärne: ETL listed, supporting LED/CFL, Incandescent (800W), Fluorescent (1200VA) light bulbs, and motors (1/2 HP).

Pilt: Detailne view of the ECOELER Countdown Timer Switch buttons and LED indicator labels, highlighting its features.
Pakendi sisu
Upon opening your ECOELER Countdown Timer Switch package, you should find the following items:
- ECOELER YWT102 Countdown Timer Switch
- Sobiv seinaplaat
- Traatmutrid
- Paigaldusjuhend

Image: The ECOELER Countdown Timer Switch, wire nuts, and face plate, along with product dimensions.
Ohutusteave
HOIATUS: To prevent serious injury or death from electric shock, always turn OFF the power at the circuit breaker or fuse box before wiring. This device is intended for installation in accordance with the National Electric Code and local regulations. Use copper wires only. If you are unsure about any part of these instructions, consult a qualified electrician.
Tehnilised andmed
| Spetsifikatsioon | Väärtus |
|---|---|
| Kaubamärk | ECOELER |
| Mudeli number | YWT102 |
| Värv | Elevandiluu |
| Toote mõõtmed | 4.19 x 3.71 x 11.99 cm |
| Võimsus/vatttage | 1800 vatti |
| Materjal | Copper, Metal, Polycarbonate |
| Kauba kaal | 136 g |
| Töörežiim | SISSE VÄLJA |
| Praegune reiting | 15 Amps |
| Operation Voltage | 120 volti (AC) |
| Kontakti tüüp | Tavaliselt avatud |
| Lüliti tüüp | Vajutusnupp |
| Terminal | Juhtmestik |
Paigaldamine
Follow these steps carefully to install your ECOELER Countdown Timer Switch. If you are not comfortable performing electrical work, please consult a qualified electrician.
Eelinstallimine
- Lülitage toide välja: Locate your circuit breaker panel and turn off the power to the switch box where you will be installing the timer. Verify that the power is off using a voltage testija.
- Eemalda olemasolev lüliti: Carefully remove the screws holding the existing wall plate and switch. Gently pull the switch out of the wall box.
- Juhtmete tuvastamine: Identify the wires connected to your existing switch. Typically, you will find:
- Hot Wire: Tavaliselt must, annab voolu kaitselülitist.
- Laadimisjuhe: Usually black or red, carries power to the light/fan.
- Neutraaljuhe: Tavaliselt valge. A neutral wire is required for this timer switch.
- Maandusjuhe: Tavaliselt roheline või paljas vask.
Juhtmete ühendused
Connect the wires from the wall box to the ECOELER Countdown Timer Switch as follows:

Image: Wiring diagram for the ECOELER Countdown Timer Switch, illustrating connections for Load (Red), Hot (Black), Ground (Green), and Neutral (White) wires. Note: Neutral Wire Must Be Required.
- Ühendage Punane traat from the timer to the Laadige traat from the wall box using a wire nut.
- Ühendage Must juhe from the timer to the Kuum traat from the wall box using a wire nut.
- Ühendage Valge traat from the timer to the Neutraalne juhe from the wall box using a wire nut.
- Ühendage Roheline traat from the timer to the Maandusjuhe from the wall box using a wire nut.
Paigaldusjärgne
- Lükake kõik juhtmed ettevaatlikult seinakontakti tagasi.
- Secure the timer switch to the wall box with the provided screws.
- Attach the new wall plate over the timer switch.
- Toite taastamine: Return to your circuit breaker panel and turn the power back ON.
Kasutusjuhised
The ECOELER Countdown Timer Switch offers two primary operating modes: Countdown Mode and Constant On Mode.
Taimerirežiim
To activate a countdown:
- Press the desired time button (1 Min, 5 Min, 10 Min, 15 Min, 30 Min, 60 Min, 2 Hour, or 4 Hour).
- The corresponding LED indicator will illuminate, and the countdown will begin.
- The connected load (light, fan, etc.) will turn off automatically once the selected time expires.
- To cancel a countdown manually, press the large ON/OFF button at the bottom.
Constant On Mode (Manual Override)
To keep the connected load continuously ON, bypassing the timer function:
- Press and hold the large ON/OFF button at the bottom for more than 5 seconds.
- The load will remain ON until the ON/OFF button is pressed again to turn it off.

Image: The ECOELER Countdown Timer Switch with its LED indicator illuminated, making it visible in a dark environment.
Hooldus
The ECOELER Countdown Timer Switch requires minimal maintenance. To ensure optimal performance and longevity:
- Keep the switch and wall plate clean by wiping with a soft, damp lapiga. Vältige abrasiivseid puhastusvahendeid või lahusteid.
- Veenduge, et lüliti ei oleks liigse niiskuse ega äärmuslike temperatuuride käes.
- Periodically check the connections for any signs of loosening, though this should only be done with the power turned off at the circuit breaker.
Veaotsing
If you encounter issues with your ECOELER Countdown Timer Switch, consider the following:
- Lüliti ei reageeri: Ensure the power is ON at the circuit breaker. Check all wire connections for tightness.
- Load Not Turning Off: Verify that the switch is not in Constant On mode (manual override). If it is, press the ON/OFF button to turn it off.
- LED-indikaator ei sütti: Check power supply and connections. If the switch is functioning otherwise, the LED might be faulty, but this is rare.
- Katkendlik töö: Ensure all wire connections are secure. Loose connections can cause inconsistent performance.
Kui probleemid püsivad ka pärast nende punktide kontrollimist, võtke ühendust klienditoega.
Garantii ja tugi
The ECOELER Countdown Timer Switch comes with a 1-aastane garantii. For any questions, technical assistance, or warranty claims, please contact ECOELER customer support. You can reach us via email at SUPPORTS@ECOELER.COMPüüame kõigile päringutele vastata 24 tunni jooksul.
Manufacturer: ECOELER ELECTRIC INC
