Speed Unlimited 600C TFT Display User Manual

Sissejuhatus

This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of the HALLOMOTOR Speed Unlimited 600C TFT Display. This advanced display is designed to seamlessly integrate with various Bafang mid-drive motors, including M200, M300, M400, M410, M420, M500, M560, M510, M600, M620, M800, and M820 models. It utilizes CAN protocol for reliable communication and offers a vibrant TFT screen for clear data monitoring and customizable settings.

Toode läbiview

HALLOMOTOR 600C TFT Display with CAN Protocol

Joonis 1: Esiosa view of the HALLOMOTOR 600C TFT Display, showing the screen and control buttons.

HALLOMOTOR 600C TFT Display compatible motors

Figure 2: The 600C TFT Display, highlighting its CAN version and compatibility with Bafang M200, M300, M400, M410, M420, M500, M510, M560, M600, M620, M800, and M820 motors.

HALLOMOTOR 600C TFT Display mounted on handlebars

Figure 3: The 600C TFT Display mounted on bicycle handlebars, demonstrating its 2.4-inch HD screen, multi-language support, multi-mode interface, and IP65 waterproof rating.

HALLOMOTOR 600C TFT Display installed on an e-bike

Joonis 4: Paigaldatud view of the 600C TFT Display on an electric bicycle, showing its compact design and handlebar mounting.

Seadistamine ja installimine

1. Pakendi sisu

600C TFT Display Unit
Mounting Bracket (integrated)
Ühenduskaabel

2. Ekraani paigaldamine

The 600C TFT Display is designed for handlebar mounting. Ensure the handlebar diameter is compatible with the integrated clamp (approximately Ø22.2mm as per dimensions). Position the display centrally for optimal viewing and access to buttons.

Loosen the mounting screw on the display's integrated clamp.
Place the display on your bicycle's handlebar in the desired position.
Tighten the mounting screw securely, ensuring the display is stable and does not rotate freely. Do not overtighten.

Figure 5: Technical dimensions of the 600C TFT Display, showing measurements in millimeters for width, height, and handlebar clamp diameter (Ø22.2mm).

3. Elektriühendus

Connect the display's cable to the corresponding port on your Bafang mid-drive motor system. Ensure the connectors are clean and dry before mating. The display uses a specific CAN protocol connector (often green, as shown in product images).

Locate the display connection port on your Bafang motor's wiring harness.
Align the male and female connectors of the display cable and the motor harness.
Push firmly until the connectors click into place, ensuring a secure and waterproof seal.
Route the cable neatly along the handlebars and frame, securing it with cable ties to prevent snagging or damage.

Kasutusjuhised

1. Display Layout and Buttons

The 600C TFT display features a clear screen and intuitive button layout for easy control.

Power Button (middle): Lülitab ekraani ja elektriratta süsteemi sisse/välja.
Up Button (+): Increases assist level, navigates menus upwards, or increases values.
Down Button (-): Decreases assist level, navigates menus downwards, or decreases values.
M-nupp (režiim): Cycles through display information, enters/exits settings menus.

2. Põhitoimingud

Toide sisse/välja: Press and hold the Power button for approximately 2 seconds to turn the system on or off.
Changing Assist Levels: Use the Up (+) and Down (-) buttons to adjust the motor's pedal assist level. The current level will be displayed on the screen.
Cycling Display Information: Press the M button briefly to cycle through various data displays such as speed (current, average, max), distance (trip, total), battery level, and power output.

3. Advanced Settings and Interface Modes

The 600C display supports multiple interface modes and customizable settings. Refer to the on-screen menu for specific options.

HALLOMOTOR 600C TFT Display multiple interface modes

Joonis 6: näitamples of multiple interface modes available on the 600C TFT Display, including digital, simulation, basic information, and detailed information views.

Juurdepääs seadetele: Typically, pressing and holding the M button, or a combination of buttons, will enter the settings menu. Follow the on-screen prompts.
Kohandamine: Within the settings, you may be able to adjust parameters such as wheel diameter, speed unit (km/h or mph), battery voltage, backlight brightness, and password protection.
Liidese režiimid: The display offers various visual layouts for data presentation. Navigate to the 'Interface Mode' setting to select your preferred view.

Hooldus

Puhastamine: The display is IP65 waterproof. Use a soft, damp lapiga ekraani ja c pühkimiseksasing. Avoid abrasive cleaners or solvents. Do not use high-pressure water jets directly on the display.
Hoiustamine: When not in use for extended periods, store the display and e-bike in a cool, dry place, away from direct sunlight and extreme temperatures.
Kaabli kontroll: Kontrollige regulaarselt ekraanikaablit ja ühendusi kulumise, kahjustuste või korrosiooni suhtes. Veenduge, et ühendused oleksid kindlalt paigas.

Veaotsing

Probleem	Võimalik põhjus	Lahendus
Ekraan ei lülitu sisse.	Low battery, loose connection, system fault.	Check e-bike battery charge. Ensure all cables are securely connected. If problem persists, consult a technician.
No speed or distance data.	Speed sensor issue, loose motor connection.	Check speed sensor alignment and connection. Verify motor connection.
Ekraanil kuvatakse veakood.	Süsteemi rike.	Note the error code and refer to your motor's manual or contact support for specific meaning and resolution.
Nupud ei reageeri.	Temporary software glitch, physical damage.	Try restarting the display (power off and on). Inspect buttons for physical damage.

Tehnilised andmed

Mudeli nimi: 600C TFT display with CAN protocol
Kaubamärk: HALLOMOOTOR
Kuva tüüp: TFT (Thin-Film Transistor)
Ekraani suurus: 2.4-inch (HD display screen)
Protokoll: CAN (Controller Area Network)
Ühilduvus: Bafang Mid Drive Motors (M200, M300, M400, M410, M420, M500, M560, M510, M600, M620, M800, M820)
Materjal: Plastikust
Värv: Must
Paigaldustüüp: Handlebar Mount (Ø22.2mm)
Veekindluse reiting: IP65
Kaasatud komponendid: LCD 600C CAN

Garantii ja tugi

Garantii teave

This product comes with a limited warranty. For specific details regarding warranty coverage, duration, and terms, please refer to the documentation provided with your purchase or contact HALLOMOTOR directly. Keep your proof of purchase for warranty claims.

Klienditugi

If you encounter any issues not covered in this manual or require further assistance, please contact the seller or HALLOMOTOR customer support. Provide your product model number and a detailed description of the issue for efficient service.

	Bafangi elektrijalgratta ajamisüsteemide ja komponentide töövihik 2023 Comprehensive workbook detailing Bafang's range of e-bike drive systems, motors, batteries, HMIs, controllers, sensors, and accessories for various applications including eMTB, eRoad, eTour, eCity, eCargo, and eFAT. Features technical specifications, compatibility information, and service tools.
	Panasonic EYFCA1WC: Kontrolleri ühendamise ja seadistamise juhend See dokument annab üksikasjalikud juhised Panasonicu kontrolleri ühendamiseks väliste välisseadmetega avatud protokolli kaudu, keskendudes parameetrite ja partiide määramisele. See hõlmab ka väliste pääsupunktide konfigureerimist, EYFCA1WC mudeli tehnilisi kirjeldusi ja veakoodide tõrkeotsingut.
	Leader Foxi elektrilise jalgratta kasutusjuhend ja käsiraamat Leader Foxi elektrijalgrataste põhjalikud kasutusjuhised, spetsifikatsioonid ja tõrkeotsingu juhend, mis keskendub Lucase mudelile ja Bafang M420 elektrikomplektile.
	Bafangi kuvari kasutusjuhend ja juhend See juhend annab üksikasjalikku teavet elektrijalgrataste Bafangi ekraani juhtpaneeli kasutamise ja mõistmise kohta, käsitledes selliseid funktsioone nagu tulede juhtimine, tugirežiimid, kõndimisabi, reisiandmed ja kuvasümbolid.
	TSDZ2 keskmootori ajamisüsteemi paigaldusjuhend YOSE POWER TSDZ2 keskmootori ajamisüsteemi põhjalik paigaldusjuhend, mis kirjeldab mootori, ekraani ja kiirusanduri paigaldamise samme, süsteemi ühendamist ja osade loendit.
	Leader Foxi elektrilise jalgratta kasutusjuhend Leader Foxi elektrijalgrataste põhjalikud kasutusjuhendid, mis hõlmavad seadistamist, kasutamist, hooldust ja tõrkeotsingut. Sisaldab üksikasju elektrijalgratta süsteemi, aku hoolduse, LCD-ekraani funktsioonide ja kontrolleri sätete kohta.

HALLOMOTOR 600C TFT display with CAN protocol