Aigo Q1718 Mini-Tower PC Case Instruction Manual

1. Sissejuhatus

This manual provides essential instructions for the installation, operation, and maintenance of your Aigo Q1718 Mini-Tower PC Case. Designed for M-ATX and ITX motherboards, this compact case offers a robust housing for your computer components. Please read this manual thoroughly before beginning any installation to ensure proper assembly and functionality.

Joonis 1: Esiosa view of the Aigo Q1718 Mini-Tower PC Case.

Joonis 2: Nurga all view of the Aigo Q1718 Mini-Tower PC Case.

2. Seadistamine ja komponentide paigaldamine

Follow these steps to install your computer components into the Aigo Q1718 PC Case. Ensure the case is placed on a stable, flat surface before beginning.

2.1 Juhtumi avamine

Carefully remove the side panel(s) of the case to access the interior. Typically, this involves unscrewing thumbscrews at the rear and sliding the panel backward.

2.2 Emaplaadi paigaldamine

The Aigo Q1718 supports M-ATX and ITX motherboards. Install the necessary standoffs onto the motherboard tray according to your motherboard's form factor. Carefully place your motherboard onto the standoffs and secure it with screws.

2.3 Toiteallika paigaldamine

The case supports ATX power supplies. Install your ATX power supply into its designated bay, usually at the top or bottom rear of the case, and secure it with screws.

2.4 Salvestusseadme paigaldamine

The case provides bays for 2 x SSDs and 1 x HDD. Mount your SSDs and HDDs into the appropriate drive bays and secure them. Connect the necessary power and data cables.

2.5 Laienduskaardi paigaldamine

The case features 4 expansion slots. Install your graphics card (VGA) or other PCIe expansion cards into the motherboard's PCIe slots. Note the maximum VGA length supported is 155 mm.

2.6 Protsessori jahuti paigaldamine

Install your CPU cooler onto the motherboard. Ensure it fits within the maximum supported CPU cooler height of 270 mm.

2.7 Fan Installation (Optional)

The Aigo Q1718 case does mitte include fans. You can install additional cooling fans in the following positions:

• Front: 1 x 120 mm fan
• Side: 1 x 120 mm fan
• Rear: 1 x 80 mm fan

Joonis 3: Interjöör view of the case, left side.

Joonis 4: Interjöör view of the case, right side.

3. Arvutikorpuse käsitsemine

Once all components are installed and cables are connected, you can close the case and power on your system.

3.1 Esipaneeli ühendused

The front panel of the Aigo Q1718 provides convenient access to:

• 2 x USB 2.0 porti: Välisseadmete, näiteks klaviatuuride, hiirte või USB-mälupulkade ühendamiseks.
• Audio/Mic Jacks: Kõrvaklappide, kõlarite või mikrofonide ühendamiseks.
• Toitenupp: To turn your computer on or off.
• Reset Button (if present): To restart your computer.

Ensure all front panel cables are correctly connected to your motherboard's headers during installation.

4. Hooldus

Regulaarne hooldus aitab tagada arvuti komponentide optimaalse jõudluse ja pikaealisuse.

4.1 Puhastamine

• Välimus: Kasutage pehmet, damp lapiga välispindade pühkimiseks. Vältige abrasiivseid puhastusvahendeid.
• Interjöör: Periodically open the case and use compressed air to remove dust buildup from components and fan mounts. If dust filters are present, clean them regularly.

4.2 Üldine hooldus

Avoid placing the case in direct sunlight or near heat sources. Ensure adequate airflow around the case to prevent overheating.

5. Veaotsing

Probleemide ilmnemisel kaaluge järgmisi levinud tõrkeotsingu samme.

• Süsteem ei lülitu sisse: Check all power connections, including the power supply to the wall outlet, the power supply to the motherboard, and the front panel power switch cable to the motherboard.
• Components not detected: Ensure all components (motherboard, CPU, RAM, storage, graphics card) are properly seated and their respective power and data cables are securely connected.
• Ülekuumenemine: Verify that all installed fans are spinning correctly and that there is no excessive dust buildup obstructing airflow. Ensure proper thermal paste application on the CPU cooler.

For more complex issues, consult the manuals for your individual components or seek professional assistance.

6. Tehnilised andmed

7. Garantii teave

The Aigo Q1718 Mini-Tower PC Case comes with a 12-kuuline tootjagarantii alates ostukuupäevast. See garantii katab materjali- ja tootmisdefektid normaalse kasutamise korral. See ei kata kahjustusi, mis on tekkinud valest paigaldamisest, väärkasutusest, õnnetustest, volitamata remondist või muudatustest.

Garantiinõuete esitamiseks säilitage ostutõend.

8. Toetus

For technical assistance, warranty claims, or further inquiries regarding your Aigo Q1718 PC Case, please contact Aigo customer support through their official websaidilt või jaemüüjalt, kellelt te toote ostsite.

When contacting support, please have your product model (Q1718-BK) and proof of purchase readily available.