aigo AF12 3-in-1 ARGB Fan Kit Instruction Manual

Sissejuhatus

This manual provides detailed instructions for the installation, operation, and maintenance of your aigo AF12 3-in-1 ARGB Fan Kit. Please read this manual thoroughly before use to ensure proper functionality and longevity of the product.

Toote omadused

The aigo AF12 3-in-1 ARGB Fan Kit offers efficient cooling and customizable lighting for your computer system. Key features include:

• Mudel: AF123IN1-BK
• Ventilaatorite kogus: 3 x 120mm fans
• Ventilaatori kiirus: 800–2000 p/min (±10%)
• Fan Noise Level: ≤30 dBA
• Õhuvool: 86.6 CFM
• Staatiline rõhk: 1.27mm-H²O
• Working Current (Motor): ≤0.2A (12V)
• Working Current (Light): ≤0.48A (5V)
• Mõõdud: 120 x 120 x 25 mm
• ARGB valgustus: Addressable RGB lighting for customizable effects.

Pakendi sisu

Veenduge, et kõik allpool loetletud esemed on teie pakendis olemas:

• 3 x aigo AF12 ARGB Fans
• Kinnituskruvid
• ARGB Controller (if included in kit)
• Cables (Power, ARGB Sync)

Paigaldusjuhend

Follow these steps to properly install your aigo AF12 ARGB fans into your computer case.

1. Valmistage oma süsteem ette: Power off your computer and disconnect it from the power source. Open your computer case.
2. Kinnituskohtade tuvastamine: Determine the desired locations for your fans (e.g., front, top, rear, bottom of the case). Ensure proper airflow direction.
3. Ventilaatorite paigaldamine: Position each fan in its chosen location. Use the provided mounting screws to secure the fans to the case. Ensure the fan blades are not obstructed.
   

   Image: An aigo AF12 fan viewed from an angle, highlighting the mounting points on its corners. This illustrates how the fan is secured.
4. Ühendage toitekaablid: Connect the 3-pin power connector from each fan to an available fan header on your motherboard or fan controller.
5. Ühendage ARGB-kaablid: Connect the ARGB cable from each fan to the ARGB controller (if applicable) or directly to a compatible 5V 3-pin ARGB header on your motherboard. Ensure correct pin orientation to avoid damage.
   

   Pilt: kõrvalprofffile of the aigo AF12 fan, illustrating the thickness and potential locations for cable connections on the frame.

6. Kaabli haldamine: Route cables neatly to prevent interference with other components and to improve airflow.
7. Sulgege korpus ja lülitage toide sisse: Close your computer case, reconnect the power, and power on your system.

Kasutusjuhised

Once installed, your aigo AF12 ARGB fans will operate automatically based on your system's fan control settings. The ARGB lighting can be controlled via your motherboard's software or a dedicated ARGB controller.

Ventilaatori kiiruse juhtimine

Fan speed can typically be adjusted through your motherboard's BIOS/UEFI settings or through fan control software provided by your motherboard manufacturer. Refer to your motherboard manual for specific instructions.

ARGB valgustuse juhtimine

If connected to a 5V 3-pin ARGB header on your motherboard, use your motherboard's ARGB synchronization software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, GIGABYTE RGB Fusion, ASRock Polychrome Sync) to customize lighting effects, colors, and patterns.

If using a dedicated ARGB controller (often included with fan kits), refer to the controller's specific instructions for lighting adjustments.

Hooldus

Regulaarne hooldus tagab optimaalse jõudluse ja pikendab ventilaatorite eluiga.

• Tolmu puhastamine: Periodically clean dust from the fan blades and housing using compressed air or a soft brush. Ensure the system is powered off before cleaning.
• Kaabli kontroll: Verify that all cables are securely connected and free from damage.
• Müra jälgimine: Listen for unusual noises, which may indicate a fan bearing issue or obstruction.

Veaotsing

If you encounter issues with your aigo AF12 ARGB fans, refer to the following common solutions:

Fans Not Spinning

• Kontrollige toiteühendust: Ensure the fan's 3-pin power connector is securely plugged into the motherboard or controller.
• Check BIOS Settings: Verify that fan headers are enabled in your motherboard's BIOS/UEFI settings.
• Test Another Header: Try connecting the fan to a different fan header to rule out a faulty header.

ARGB tuled ei tööta

• Kontrollige ARGB-ühendust: Ensure the 5V 3-pin ARGB connector is correctly and securely plugged into the motherboard or controller. Verify the pin orientation.
• Check Software: Confirm that your motherboard's ARGB software is installed and configured correctly.
• Ühilduvus: Ensure your motherboard has a compatible 5V 3-pin ARGB header. This product is not compatible with 12V 4-pin RGB headers.

Liigne müra

• Kontrollige takistusi: Ensure no cables or other components are touching the fan blades.
• Kinnituskruvid: Verify that all mounting screws are tightened to prevent vibrations.
• Tolmu kogunemine: Clean any dust from the fan blades.

Tehnilised andmed

Garantii ja tugi

This aigo product comes with a 12-kuuline garantii alates ostukuupäevast, mis katab tootmisdefektid.

For technical support, warranty claims, or further assistance, please visit the official aigo store or contact their customer service through the details provided on their websaidile.

Official aigo Store: aigo Store on Amazon