Karlsson Spry Square LED Alarm Clock Instruction Manual

1. Toote lõppview

The Karlsson Spry Square LED Alarm Clock (Model KA5982GY) is a compact digital alarm clock designed for clear time display and reliable alarm functionality. This manual provides detailed instructions for its setup, operation, and maintenance.

Joonis 1: Esiosa view of the Karlsson Spry Square LED Alarm Clock, showing the time display.

2. Pakendi sisu

• Karlsson Spry Square LED Alarm Clock (Model KA5982GY)
• USB-toitekaabel (alalisvool 5 V)
• Kasutusjuhend

Note: Batteries (if required for backup) and a USB power adapter are typically not included and must be purchased separately.

3. Seadistamine

3.1 Seadme sisselülitamine

The alarm clock can be powered via a DC 5V USB connection or by batteries for backup. For continuous operation, it is recommended to use the USB power cable.

1. Ühendage USB-toide: Insert the small end of the provided USB cable into the DC 5V port on the back of the alarm clock. Connect the larger end to a USB power adapter (not included) or a powered USB port.
2. Install Batteries (Optional Backup): Open the battery compartment cover on the back of the clock. Insert the appropriate batteries (e.g., AAA, type not specified, refer to compartment markings) ensuring correct polarity (+/-). Close the cover securely. Batteries provide backup power in case of a power outage, preserving time settings.

Joonis 2: Tagakülg view of the alarm clock, highlighting the DC 5V input, battery compartment, and control buttons (SET, UP, DOWN, RST).

3.2 Algse kellaaja seadistamine

Upon first power-up or after a full power reset, the display may show a default time or flash. Follow these steps to set the current time:

1. Vajutage ja hoidke all nuppu SET nuppu kella tagaküljel, kuni tunninumbrid hakkavad vilkuma.
2. Kasutage UP ja ALLA nupud kellaaja reguleerimiseks.
3. Vajutage nuppu SET Tunni kinnitamiseks ja minutite seadistamisele liikumiseks vajutage uuesti nuppu. Minutinumbrid vilguvad.
4. Kasutage UP ja ALLA nuppe minutite reguleerimiseks.
5. Vajutage nuppu SET minutite kinnitamiseks ja aja seadistamise režiimist väljumiseks vajutage nuppu veel üks kord.

4. Kasutusjuhised

4.1 Alarmi seadistamine

Äratuse seadmiseks tehke järgmist.

1. Tavapärases ajaekraanil vajutage nuppu SET button once (do not hold). The display will show the current alarm time or 'OFF'.
2. Kui äratuse aeg kuvatakse, vajutage ja hoidke all SET nuppu, kuni äratuse tunninumbrid vilguvad.
3. Kasutage UP ja ALLA nupud äratuse kellaaja reguleerimiseks.
4. Vajutage SET again to confirm the alarm hour and move to the alarm minute setting.
5. Kasutage UP ja ALLA nupud äratuse minutite reguleerimiseks.
6. Vajutage SET one more time to confirm the alarm minutes and activate the alarm. An alarm indicator (e.g., a small bell icon or dot) should appear on the display.

4.2 Turning the Alarm On/Off

To toggle the alarm on or off without changing the set time:

1. Tavapärases ajaekraanil vajutage nuppu SET button once to show the alarm time.
2. Kui kuvatakse äratuse kellaaeg, vajutage nuppu UP or ALLA button to toggle the alarm function on or off. The alarm indicator will appear or disappear accordingly.

4.3 Edasilükkamise funktsioon

When the alarm sounds, press any button (other than RST or the main power button if present) to activate the snooze function. The alarm will temporarily stop and sound again after a few minutes (typical snooze duration is 5-9 minutes, specific duration not provided). The snooze indicator may flash on the display.

4.4 Häire peatamine

To stop the alarm completely when it is sounding, press the RST button or unplug the power. The alarm will reset for the next day at the set time.

5. Hooldus

5.1 Puhastamine

To maintain the appearance of your alarm clock:

• Pühkige pind pehme ja kuiva lapiga.
• Kangekaelsete plekkide korral dörtsige kergeltampLoputage lappi veega. Vältige abrasiivsete puhastusvahendite, lahustite või keemiliste pihustite kasutamist, kuna need võivad viimistlust kahjustada.
• Veenduge, et seadmesse ei satuks vedelikku avade kaudu.

5.2 Aku vahetamine

If using batteries for backup, replace them when the display becomes dim or if the clock loses time during power outages. Refer to section 3.1 for battery installation instructions.

6. Veaotsing

• Ekraan on tühi või tuhm:
  - Ensure the USB power cable is securely connected to both the clock and a working power source.
  - If using batteries, check if they are correctly installed and not depleted. Replace if necessary.
• Clock loses time:
  - If powered by USB, ensure a stable power supply.
  - If relying on battery backup, replace the batteries.
• Äratus ei helise:
  - Verify that the alarm is set and activated (check for the alarm indicator on the display). Refer to section 4.1 and 4.2.
  - Ensure the volume is not set to zero (if applicable, though this model typically has a fixed alarm sound).
• Nupud ei reageeri:
  - Try pressing the RST button on the back with a thin object (like a paperclip) to perform a soft reset. This may clear temporary issues without losing settings if backup batteries are present.
  - Disconnect and reconnect the power supply.

7. Tehnilised andmed

8. Garantii ja tugi

Warranty information for the Karlsson Spry Square LED Alarm Clock is typically provided at the point of purchase or included with the product packaging. Please retain your proof of purchase for warranty claims.

For technical support, service, or further inquiries, please contact Karlsson customer service directly through their official websaidilt või jaemüüjalt, kellelt toode osteti.