Sissejuhatus
The Baseus BS-CH001 is a versatile device designed to provide emergency jump-starting for 12V vehicles and serve as a portable power bank for charging electronic devices. With a 10000mAh capacity and a peak current of 1000A, it offers a reliable solution for unexpected car battery issues and on-the-go power needs. This manual provides essential instructions for safe and effective use.
Note: Product images and videos are not included in this manual due to a discrepancy between the product description and the available media assets.
Pakendi sisu
Palun kontrollige pakendilt järgmisi esemeid:
- 1 x Baseus Car Jump Starter
- 1 x Smart Jump Starter Clamp Cable (with red and black alligator clips)
- 1 x USB-tüüpi C laadimiskaabel
Põhifunktsioonid
- Kõrge jõudlus: 10000mAh capacity, 12V start voltage, 500A starting current, and 1000A peak current.
- Multifunktsionaalne: Acts as both a car jump starter and a portable power bank.
- Reliable Starts: Capable of starting a car up to 50 times on a single full charge.
- Integreeritud ekraan: Digital screen shows the remaining battery level of the jump starter.
- Äärmuslik temperatuuritaluvus: High-performance polymer battery cells ensure operation in very low and high temperatures.
- Täiustatud ohutus: Features 9 levels of protection including overcharge, voltage stabilization, short circuit, over-discharge, reverse connection, and over-temperature protection.
- Low Standby Power: Retains up to 85% of stored energy after one year of non-use.
- Sisseehitatud LED-valgusti: Can be used as an emergency flashlight.
- Kaasaskantav: Compact size and technical parameters allow it to be carried on an airplane.
Ohutusteave
Enne toote kasutamist lugege palun kõik ohutushoiatused ja juhised läbi. Nende juhiste eiramine võib põhjustada elektrilöögi, tulekahju ja/või tõsiseid vigastusi.
- Ärge võtke seadet lahti, muutke ega parandage.
- Ärge jätke seadet vihma või niiskuse kätte.
- Do not use the device if the battery clamps või kaablid on kahjustatud.
- Veenduge õige polaarsuse ühenduses (punane klamberamp positiivseks, mustaks clamp to negative) to avoid short circuits.
- Hoida lastele kättesaamatus kohas.
- Ärge käivitage külmunud akut.
- Ärge ühendage positiivset ja negatiivset klamps koos.
- Kasutage seadet hästi ventileeritavas kohas.
- Remove the jump starter from the car battery immediately after starting the vehicle.
- Hoidke seadet jahedas ja kuivas kohas, kui seda ei kasutata.
Setup: Charging the Jump Starter
Before first use, fully charge the jump starter. It is recommended to charge the device every 3-6 months to maintain battery health, even when not in use.
- Connect the provided USB to Type-C charging cable to the Type-C input port on the jump starter.
- Connect the other end of the USB cable to a suitable USB power adapter (e.g., 5V/2.4A, not included).
- The digital display will show the charging progress. Charge until the display indicates 100%.
- Pärast täielikku laadimist ühendage laadimiskaabel lahti.
Operating Instructions: Car Jump Starting
Follow these steps carefully to jump start your vehicle:
- Step 1: Connect the Smart Clamp Kaabel
Insert the smart jump starter clamp cable into the EC5 interface of the Baseus jump starter. The flashing red and green lights on the clamp indicate it's ready for connection to the car battery.
- Step 2: Connect to Car Battery
Open your car's hood. Connect the red positive (+) clamp to the positive (+) terminal of your car battery. Connect the black negative (-) clamp to the negative (-) terminal of your car battery. Ensure a secure connection.
- Step 3: Start the Vehicle
Return to your car and start the engine. If the car does not start immediately, wait a few seconds and try again. Do not crank the engine for more than 3 seconds at a time, and wait at least 30 seconds between attempts.
- 4. samm: katkestage ühendus
Once the car engine starts, immediately remove the smart jump starter clamp cable from the car battery terminals, then disconnect it from the jump starter. Do not drive with the jump starter connected.
Operating Instructions: Power Bank Function
The Baseus BS-CH001 can also be used to charge your electronic devices.
- Connect your device's charging cable (e.g., USB to Type-C, USB to Lightning) to the USB output port on the jump starter.
- Ühendage kaabli teine ots oma elektroonikaseadmega.
- The jump starter will automatically begin charging your device. The digital display will show the remaining power.
- Once charging is complete, disconnect your device and the cable.
Hooldus
- Clean the device with a dry, soft cloth. Do not use abrasive cleaners or solvents.
- Hoidke käivitusabi jahedas ja kuivas kohas, eemal otsesest päikesevalgusest ja äärmuslikest temperatuuridest.
- For optimal battery life, fully charge the device at least once every 3-6 months.
- Hoidke klamp cables clean and free from corrosion.
Veaotsing
| Probleem | Võimalik põhjus | Lahendus |
|---|---|---|
| Seade ei lülitu sisse. | Aku on tühjaks saanud. | Laadige käivitusabi täielikult. |
| Car does not start. | Vale klamp ühendus. | Veenduge, et clamps are connected to the correct battery terminals (red to +, black to -). |
| Car does not start. | Car battery is severely damaged or frozen. | Consult a professional mechanic. Do not attempt to jump start a frozen battery. |
| Device gets hot during use. | Normal operation during high current discharge. | This is normal. If it becomes excessively hot or emits smoke, discontinue use immediately. |
| Electronic device not charging. | Jump starter battery low or cable issue. | Ensure jump starter is charged. Check if the charging cable is properly connected and functional. |
Tehnilised andmed
| Kaubamärk | Baseus |
| Mudel | BS-CH001 |
| Mahutavus | 10000 mAh / 3.7 V / 37 Wh |
| Sisend Voltage (Type-C) | 5 V / 2.4 A (max) |
| USB väljundvõimsus | 5 V / 2.4 A (max) |
| Start Voltage | 12V |
| Algvool | 500A |
| Tippvool | 1000A |
| Kaal | 470 g |
| Mõõtmed | 10 x 5 x 5 cm (ligikaudne, põhineb tootekirjeldusel) |
Garantii ja tugi
This product comes with a standard manufacturer's warranty. For detailed warranty information, please refer to the warranty card included in your product packaging or visit the official Baseus website. For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact Baseus customer service through their official channels.
Note: No specific warranty period or support contact information was provided in the product data. Please refer to the manufacturer's official resources.
