Sissejuhatus
This manual provides detailed instructions for the installation, operation, and maintenance of your BOBRICK 2013 Stainless Steel Automatic Wall-Mounted Foam Soap Dispenser. Designed for durability and hygiene, this touch-free dispenser offers a reliable solution for various commercial and public restroom environments. Please read this manual thoroughly before installation and use to ensure proper function and longevity of the product.
Toote omadused
- Vastupidav konstruktsioon: Manufactured from high-quality stainless steel with a satin finish, designed for long-lasting performance and resistance to wear.
- Puutevaba toimimine: Features a sensor-activated mechanism for automatic, hygienic soap dispensing, minimizing contact and promoting cleanliness.
- Versatile Soap Compatibility: Equipped with a corrosion-resistant valve capable of dispensing a variety of bulk-fill foam soaps, iodine-based soaps, and alcohol-based liquid or gel hand sanitizers.
- Suur mahutavus: Holds up to 800 ml (27 fl. oz.) of soap, reducing the frequency of refills.
- Ökonoomne: Designed to use commonly available bulk foam soap, eliminating the need for expensive proprietary cartridges and offering significant cost savings.
- Turvaline disain: Includes a tumbler lock to prevent tampering and unauthorized access to the soap reservoir.
- Täitmise indikaator: A visible window allows for easy monitoring of soap levels.
- Aku tühjenemise indikaator: A flashing blue light signals when batteries are low and require replacement.
Paigaldamine
The BOBRICK 2013 dispenser is designed for wall-mounted installation. Ensure the mounting surface is sturdy and capable of supporting the dispenser's weight when full. Proper installation is crucial for optimal performance and security.
- Vali asukoht: Choose a suitable wall location, ensuring adequate clearance above and below the dispenser for refilling and hand access.
- Märkige kinnituspunktid: Use the provided mounting template (if applicable) or measure and mark the drill points for the mounting screws.
- Puurida augud: Drill pilot holes at the marked locations. Use appropriate drill bits for your wall material (e.g., masonry bit for tile/concrete, wood bit for studs).
- Secure Dispenser: Attach the dispenser to the wall using the appropriate screws and anchors. Ensure it is level and securely fastened.
- Aku paigaldamine: Open the dispenser using the provided key. Install 4 x 1.5V Alkaline “AA” cell batteries into the designated compartment.
- Esialgne täitmine: Fill the soap reservoir with suitable foam soap. Close and lock the dispenser.
Figure 1: Technical specifications and dimensions for installation.
Operatsioon
The BOBRICK 2013 dispenser operates automatically via an infrared sensor. To dispense soap:
- Position Hands: Place your hands flat beneath the dispenser's sensor area.
- Automaatne väljastamine: The sensor will detect your hands and automatically dispense a measured amount of foam soap.
- Märgutuli: A blue indicator light will illuminate during dispensing, signaling that the unit is in use.
Figure 2: Blue indicator light signals when the dispenser is in use.
Video 1: Demonstrates the automatic dispensing function of the Bobrick Wall-Mounted Foam Soap Dispenser.
Maintenance & Refilling
Regulaarne hooldus tagab optimaalse jõudluse ja hügieeni.
- Checking Soap Level: Monitor the soap level through the refill indicator window on the front of the dispenser.
- Seebi täitmine:
- Unlock the dispenser using the provided key at the top. The front cover will hinge open.
- Carefully remove the empty soap reservoir.
- Fill the reservoir with bulk foam soap. Do not overfill.
- Reinsert the filled reservoir and close the front cover, ensuring it locks securely.
- Patarei vahetus: A flashing blue light indicates low battery. Unlock the dispenser, replace the 4 x 1.5V Alkaline “AA” cell batteries, and close the cover.
- Puhastamine: Wipe the exterior of the stainless steel dispenser with a soft, damp cloth and a mild, non-abrasive cleaner. Avoid harsh chemicals or abrasive materials that could damage the finish.
Figure 3: Dispenser with hinged housing open for easy refilling.
Figure 4: Important information regarding battery type and low battery indicator.
Video 2: Demonstrates the refilling process for the Bobrick soap dispenser.
Veaotsing
| Probleem | Võimalik põhjus | Lahendus |
|---|---|---|
| Dosaator ei aktiveeru | Low or dead batteries; Sensor obstructed; No soap in reservoir. | Replace batteries; Clear sensor area; Refill soap reservoir. |
| Soap not dispensing or dispensing inconsistently | Soap reservoir empty; Dispensing mechanism clogged; Incorrect soap type (not foam). | Refill soap; Clean dispensing nozzle; Ensure foam soap is used. |
| Vilkuv sinine tuli | Aku tühjenemise indikaator. | Replace all 4 x AA batteries. |
Tehnilised andmed
| Funktsioon | Detail |
|---|---|
| Mudeli number | B-2013 |
| Materjal | Roostevaba teras |
| Lõpeta | Satiinviimistlus |
| Toote mõõtmed (P x L x K) | 5" x 4.72" x 11" (umbes 127 mm x 120 mm x 279 mm) |
| Vedeliku mahutavus | 800 Milliliters (27 fl. oz.) |
| Toiteallikas | 4 x 1.5V Alkaline “AA” Cell Batteries |
| Dispensing Type | Automatic Foam |
| Paigaldustüüp | Seinale paigaldatav |
Ohutusteave
- Do not submerge the dispenser in water or expose it to excessive moisture.
- Use only the specified battery type (4 x AA Alkaline). Do not mix old and new batteries or different battery types.
- Keep the dispenser out of reach of small children to prevent misuse or injury.
- Ensure the dispenser is securely mounted to prevent it from falling.
- Use only foam soap or compatible sanitizers as specified. Using incorrect liquids may damage the dispensing mechanism.
Garantii ja tugi
Specific warranty details and customer support contact information are typically provided with your purchase documentation. Please refer to the packaging or contact Bobrick customer service for assistance.
