ErGear Dual Monitor Desk Mount EGCM13B Instruction Manual

Sissejuhatus

Thank you for choosing the ErGear Dual Monitor Desk Mount. This manual provides detailed instructions for the safe and efficient installation, operation, and maintenance of your new monitor mount. Please read this manual thoroughly before installation and keep it for future reference.

Oluline ohutusteave

Please ensure all instructions are read and understood before assembly and use. If you have any questions, please contact customer service. Failure to follow these instructions may result in property damage, serious injury, or death.

Verify that your monitor's weight and VESA pattern are within the specified limits.
Do not exceed the maximum load capacity of 26.5 lbs per arm.
Ensure the mounting surface (desk) is strong enough to support the combined weight of the mount and monitors.
Use only the provided hardware.
Hoidke väikesed osad lastele kättesaamatus kohas.

Tehnilised andmed

Mudel: EGCM13B
Ekraani suuruse ühilduvus: 13 kuni 34 tolli
Weight Capacity (per arm): Kuni 26.5 naela
VESA ühilduvus: 75x75 mm, 100x100 mm
Arm Span: 33 tolli
Pooluse kõrgus: 16.3 tolli
Liikumise tüüp: Tilt, Swivel, Rotation, Articulating
Maksimaalne kaldenurk: 90 kraadi
Materjal: Legeerteras
Värv: Must
Paigaldustüüp: Lauakinnitus (C-Clamp või rõngastihend)
C-Clamp Laua paksus: 0.39" - 3.15"
Grommet Mount Desk Thickness: 0.39" - 2.17"
Kummitihendi augu läbimõõt: 0.47" - 0.79"

Pakendi sisu

Please check that all parts are included and undamaged. If any parts are missing or damaged, please contact customer service.

Peapost koos lauaklambrigaamp/Grommet Base
Kahe monitori käed
VESA plaadid (2x)
Mounting Hardware (screws, washers, tools)
Kaablihalduse klambrid
Kasutusjuhend

ErGear Dual Monitor Desk Mount components laid out — Image: All components of the ErGear Dual Monitor Desk Mount laid out, including the main pole, dual arms, VESA plates, and various hardware for assembly.

Seadistamine ja installimine

1. Desk Compatibility Check

Before installation, ensure your desk meets the following criteria:

Materjal: Recommended for wooden tables.
Alumine: Preferably free of beams or panels that may interfere with installation.
C-Clamp Paksus: 0.39" - 3.15"
Grommet Mount Thickness: 0.39" - 2.17" (Hole Diameter: 0.47" - 0.79")

2. Monitor Compatibility Check

Each monitor must meet these conditions:

Ekraani suurus: 13 kuni 34 tolli
Kaal: Kuni 26.5 naela
VESA kinnitusavad: 75x75 mm or 100x100 mm apart on the back of the monitor.

Diagram showing VESA hole patterns on the back of a monitor — Image: Illustration of VESA mounting hole patterns (75x75mm and 100x100mm) on the back of a monitor, indicating where the mount attaches. It also shows how to remove a monitor's original stand.

3. Assemble the Pole with Clamp Toetus

Choose either C-Clamp or Grommet installation based on your desk type.

Video: Demonstrates the installation process of the dual monitor desk mount, including assembling the pole with clamp support for both grommet and C-clamp methods. This video is provided by the seller.

Diagramm, mis näitab C-Cl-iamp ja Grommeti kinnitusvõimalused — Image: Visual guide illustrating the two available mounting options: C-Clamp for desk edges and Grommet mount for desks with existing holes. Includes dimensions for compatible desk thickness and hole diameter.

Follow the detailed steps in the provided video and diagrams to securely attach the main pole to your desk using either the C-Clamp or Grommet method. Ensure all screws are tightened appropriately for stability.

4. Assemble the Arm and Pole Wire Clips

Attach the monitor arms to the main pole. Loosen the screw on the pipe clamp before installing the arm, then tighten it securely. Ensure the VESA plate side of the arm faces upwards. Install the cable management clips along the arms and pole.

5. Assemble VESA Plate and Monitor

Attach the VESA plate to the back of your monitor using the appropriate screws and washers. Ensure it is securely fastened.

6. Install the Monitor to the Swivel Arm

Carefully slide the monitor (with the attached VESA plate) onto the swivel arm. Secure it by tightening the locking screw. Adjust the screw with the Allen key to adjust the height of the VESA panel as needed (clockwise to lower, counter-clockwise to raise).

Image showing two monitors mounted on the ErGear Dual Monitor Desk Mount — Image: Two monitors securely mounted on the ErGear Dual Monitor Desk Mount, demonstrating a clean and organized workspace.

Kasutamine ja reguleerimine

The ErGear Dual Monitor Desk Mount offers versatile adjustments for optimal viewmugavus:

Kõrguse reguleerimine: Lõdvendage klamp on the main pole to slide the arms up or down to your desired height. Re-tighten the clamp turvaliselt.
Kallutage: Adjust the monitor's vertical angle by tilting it +/-45 degrees to reduce glare and eye strain.
Pööratav: Rotate the monitor horizontally +/-90 degrees for easy screen sharing or viewerinevate nurkade alt.
Pööramine: Pöörake monitori 360 kraadi, et vahetada horisontaal- ja vertikaalpaigutust.
Arm Extension/Retraction: The articulating arms allow you to extend or retract your monitors closer or further from you. Adjust the tension screws on the arm joints as needed to hold the desired position.

Diagram showing tilt, swivel, and rotation adjustments — Image: Visual representation of the monitor's flexible adjustments, including +/-45° tilt, +/-90° swivel, and 360° rotation, allowing for ergonomic positioning.

Hooldus

Kontrollige regulaarselt kõiki kruvisid ja ühendusi, et need oleksid kindlalt ja kindlalt kinnitatud.
Puhastage alus pehme lapigaamp riie. Vältige abrasiivseid puhastusvahendeid.
Do not disassemble the mount unless instructed to do so.

Veaotsing

Monitorid ei ole tasapinnal: Ensure the VESA plates are correctly aligned and tightened. Adjust the small bolts on the tilt head to fine-tune alignment.
Monitors sag or do not hold position: Tighten the tension screws on the arm joints. Refer to the assembly instructions for specific locations.
Alus tundub ebastabiilne: Double-check that the C-Clamp or Grommet mount is securely fastened to the desk and all screws are fully tightened. Ensure your desk meets the thickness requirements.

Garantii ja tugi

For warranty information or technical support, please refer to the product packaging or contact ErGear customer service directly. Keep your purchase receipt as proof of purchase.

	ErGear EGESD7 elektriline seisulaud – paigaldusjuhend ErGear EGESD7 elektrilise seisulaua üksikasjalik paigaldusjuhend, millel on kõrguse reguleerimine, mäluseaded ja 63x28-tolline pind. Sisaldab spetsifikatsioone ja paigaldusjuhiseid ergonoomilise tööruumi loomiseks.
	ErGeari elektrilise seisulaua kasutusjuhend - kokkupaneku- ja kasutusjuhend ErGeari elektrilise seisulaua (mudelid EGESD8B, EGESD8V) põhjalik kasutusjuhend. Siit saate teada, kuidas oma kõrgusega reguleeritavat lauda kokku panna, kasutada ja tõrkeotsingut teha.
	Ergeari elektriline seisulaud MSESD202-80A kasutusjuhend ja kokkupanekujuhend Ergeari elektrilise seisulaua (mudel MSESD202-80A) põhjalik juhend, mis sisaldab kokkupanekujuhiseid, ohutusteavet, kontrolleri kasutamist ja tõrkeotsingut.
	Ergeari elektrilise seisulaua kokkupaneku ja kasutusjuhend Põhjalik juhend Ergeari 48" / 63" elektrilise seisulaua (mudelid EGESD5B, EGESD5V, EGESD5N, EGESD7B, EGESD7V, EGESD7N) kokkupanekuks ja kasutamiseks. Sisaldab samm-sammult juhiseid, spetsifikatsioone, kontrolleri funktsioone ja tõrkeotsingu veakoode.
	ErGeari kõrgusega reguleeritava elektrilise seisulaua paigaldusjuhend ErGeari kõrgusega reguleeritava elektrilise seisulaua (55 x 28 tolli) paigaldusjuhend. See juhend annab samm-sammult juhised ErGeari seisulaua kokkupanekuks, kasutamiseks ja tõrkeotsinguks.
	ErGear Desk Monitor Arm EGDMA69-SS: Installation Guide and Features Comprehensive guide for installing and using the ErGear Desk Monitor Arm (EGDMA69-SS). Features include VESA compatibility, adjustable gas spring, swivel, tilt, and rotation for optimal monitor positioning. Includes safety information and step-by-step assembly instructions.

ErGear EGCM13B