Sissejuhatus
The EARMOR M20T Electronic Shooting Ear Protection provides advanced hearing safety and communication capabilities for various noisy environments. Featuring a Noise Reduction Rating (NRR) of 26dB and Bluetooth 5.3 connectivity, these earbuds are designed to protect your hearing while allowing ambient sound amplification and seamless communication.
Pakendi sisu
Veenduge, et kõik allpool loetletud esemed on teie pakendis olemas:
- Laadimisümbris
- Juhtmevabad kõrvaklapid (vasak ja parem)
- 3-Size Ear Covers
- 3-Size Cylindrical Foam Eartips
- Universal Conical Tip
- Tuulemuhv
- Retention Cord (Anti-Loss Lanyard)
- USB-C laadimiskaabel
- Kasutusjuhend
Image: EARMOR M20T package contents.
Seadistamis- ja kandmisjuhised
1. Õigete kõrvaotsikute valimine
The EARMOR M20T comes with various sizes of foam eartips and ear covers to ensure a secure and comfortable fit. A proper fit is crucial for optimal noise reduction and sound quality. Experiment with different sizes to find the best seal for your ears.
2. Kõrvaklappide kandmine
- Gently squeeze the foam eartip to compress it. Ensure the foam tip is dry and bouncy before insertion.
- Pull your ear upward with one hand to straighten the ear canal.
- Sisestage kokkusurutud kõrvatropp oma kõrvakanalisse.
- Hold the earplug in place for a few seconds until the foam fully expands and creates a tight seal.
- Gently pull on the earbud to check if it fits tightly and securely.
Image: Proper wearing of EARMOR M20T earbuds.
3. Installing the Anti-Loss Rope
To prevent accidental loss of your earbuds, you can attach the included anti-loss rope:
- Remove the foam eartips from the earbuds.
- Thread one end of the anti-loss rope through the designated loop on the earbud.
- Securely fix the rope to the earbud.
- Reinstall the foam eartips back onto the earbuds.
Video: Demonstration of EARMOR M20T anti-loss rope installation and general use.
Laadimine
The EARMOR M20T earbuds are charged using the provided charging case. The case itself is rechargeable via a USB-C cable.
- Kõrvaklappide laadimine: Place the earbuds into their respective slots in the charging case. Ensure the contact points align. The indicator lights on the earbuds will illuminate to show they are charging.
- Korpuse laadimine: Connect the USB-C charging cable to the charging port on the case and plug the other end into a compatible USB power source. The indicator lights on the case will show the charging status.
- A full charge for the earbuds typically provides 4-5 hours of use. The charging case can provide up to 3 full charges for the earbuds.
Image: Earbuds in charging case.
Video: Demonstration of EARMOR M20T charging and mode switching.
Kasutusjuhised
1. Toide sisse/välja
- Toide sisse: Press and hold the button on each earbud for approximately 2 seconds until you hear a power-on prompt.
- Toide välja: Press and hold the button on each earbud for approximately 2 seconds until you hear a power-off prompt.
2. Režiimi vahetamine
The M20T features three operational modes: Silent, Indoor, and Outdoor. To switch between modes, briefly press the button on either earbud (approximately 1 second).
- Vaikne režiim: Provides maximum noise reduction, ideal for environments requiring complete focus or extreme quiet.
- Siserežiim: Balances noise reduction with ambient sound amplification, suitable for indoor shooting ranges or workshops.
- Välirežiim: Offers enhanced ambient sound amplification for situational awareness while still protecting against harmful impulse noises, perfect for outdoor hunting or construction sites.
Image: One-Button Magic controls.
3. Bluetoothi sidumine
- When the earbuds are powered on, they will automatically enter pairing mode (indicated by flashing blue and red lights).
- On your device (smartphone, tablet, etc.), enable Bluetooth and search for "M20T" in the list of available devices.
- Select "M20T" to connect. Once paired, the earbuds will automatically reconnect to your device when powered on and within range.
Image: Seamless Bluetooth Sync.
4. Kõnehaldus
- Kõnele vastamine/lõpetamine: Briefly press the button on either earbud once.
- Keeldu kõnest: Press and hold the button on either earbud for approximately 2 seconds.
Põhifunktsioonid
- NRR 26dB Hearing Protection: The M20T effectively muffles hazardous noises above 82dB, providing crucial hearing protection during high-decibel activities such as shooting, hunting, and operating loud machinery.
- Ambient heli Amplifikatsioon: Advanced sound technology allows for clear amplification of important ambient sounds, enabling communication and situational awareness without removing the ear protection.
- Directional Clarity: Experience precise stereo surround sound for clear directional awareness, which is vital in tactical situations or hunting.
- Bluetooth 5.3 ühenduvus: Enjoy stable and seamless wireless connection for audio streaming and calls.
Image: Shockwave 26dB Defense.
Image: Advanced Ambient Awareness.
Image: Directional Clarity.
Hooldus
- Puhastamine: Puhastage kõrvaklappe ja laadimisümbrist regulaarselt pehme ja kuiva lapiga. Ärge kasutage tugevaid kemikaale ega abrasiivseid materjale.
- Kõrvaklapi vahetus: Replace eartips periodically or if they show signs of wear to maintain optimal hygiene and noise reduction performance.
- Hoiustamine: Hoidke kõrvaklappe laadimisümbrises, kui neid ei kasutata, et neid kaitsta ja laetuna hoida.
Veaotsing
- Puudub heli/halb helikvaliteet:
- Ensure earbuds are properly seated in the ear canal for a tight seal.
- Check the selected mode (Silent, Indoor, Outdoor) is appropriate for your environment.
- Verify Bluetooth connection is stable and volume is adjusted on both the earbuds and your connected device.
- Kõrvaklapid ei lae:
- Ensure earbuds are correctly placed in the charging case and contact points are clean.
- Check if the charging case itself has sufficient charge.
- Veenduge, et USB-C-kaabel ja toiteallikas töötavad õigesti.
- Bluetoothi katkestamine:
- Ensure earbuds are within the effective range of your Bluetooth device.
- Proovige kõrvaklapid oma seadmega lahti siduda ja uuesti siduda.
Tehnilised andmed
| Mudeli number | M20T SHOCKWAVE |
| Müra vähendamise reiting (NRR) | 26 dB |
| Bluetoothi versioon | 5.3 |
| Reaktsiooniaeg | 0.5ms (for noise suppression) |
| Aku tööiga (kõrvaklapid) | Ligikaudu 4–5 tundi laadimise kohta |
| Laadimiskorpuse maht | Annab kõrvaklappidele kuni neli täislaadimist |
| Laadimisport | USB-C |
| Pakendi mõõtmed | 5 x 4.72 x 2.32 tolli |
| Kauba kaal | 8.78 untsi |
Garantii ja tugi
EARMOR provides a 1-Year Money Back Guarantee ja a Piiratud eluaegne garantii for the M20T Electronic Shooting Ear Protection. For detailed warranty terms, technical support, or service inquiries, please refer to the contact information provided in your product packaging or visit the official EARMOR websaidile.
