TYLT Power Bottle 2.0

TYLT Power Bottle 2.0 User Manual

Model: Power Bottle 2.0 | Brand: TYLT

1. Sissejuhatus

The TYLT Power Bottle 2.0 is an innovative solution combining a 24-ounce stainless steel water bottle with a removable 5700mAh magnetic portable power bank. This versatile product is designed to keep you hydrated and your devices charged, making it ideal for daily use, travel, and outdoor activities.

Põhifunktsioonide hulka kuuluvad:

2. Toote komponendid

The TYLT Power Bottle 2.0 consists of the following main components:

TYLT Power Bottle 2.0 in black, showing the full bottle with the power bank base and lanyard.

Figure 1: The TYLT Power Bottle 2.0, showcasing its sleek black design and integrated power bank.

3. Seadistamine ja esmane kasutamine

3.1 Lahtipakkimine ja ülevaatus

Carefully remove all components from the packaging. Inspect the bottle and power bank for any signs of damage. Ensure all listed components are present.

3.2 Initial Charging of Power Bank

  1. Unscrew the power bank base from the bottom of the bottle by twisting counter-clockwise.
  2. Locate the USB-C charging cable stored within the power bank base compartment.
  3. Connect the USB-C end of the cable to the USB-C port on the power bank base.
  4. Connect the USB-A end of the cable to a compatible USB power adapter (not included) and plug it into a wall outlet.
  5. The LED indicator lights on the power bank base will illuminate to show charging progress. A full charge is indicated when all four lights are solid.
  6. Once fully charged, disconnect the cable and store it back in the power bank base compartment. Reattach the power bank base to the bottle by twisting clockwise until secure.
Close-up of the TYLT Power Bottle 2.0's removable power bank base being unscrewed from the bottle.

Figure 2: Detaching the power bank base for charging or cleaning.

Inside the power bank base compartment of the TYLT Power Bottle 2.0, showing the stored USB-C charging cable.

Figure 3: The convenient storage compartment for the USB-C charging cable within the power bank base.

4. Kasutusjuhised

4.1 Using the Water Bottle

Üles view of the TYLT Power Bottle 2.0 with its wide mouth opening and screw cap removed.

Figure 4: The wide mouth opening of the bottle, designed for easy filling and cleaning.

4.2 Using the Power Bank

The power bank offers two charging methods: wireless and wired.

Wireless Charging (Magnetic-enabled devices):

  1. Ensure the power bank base is charged (check LED indicators).
  2. Unscrew the power bank base from the bottle.
  3. Place your magnetic-enabled wireless charging device (e.g., compatible smartphone) directly onto the top surface of the power bank base. Ensure proper alignment for optimal charging.
  4. Seade peaks automaatselt laadima hakkama.
A smartphone wirelessly charging on the detached TYLT Power Bottle 2.0 power bank base, next to the bottle.

Figure 5: Wireless charging a smartphone using the detached power bank base.

Wired Charging (USB-A or USB-C):

  1. Ensure the power bank base is charged.
  2. Unscrew the power bank base from the bottle.
  3. Open the protective flap on the side of the power bank base to reveal the USB-A and USB-C ports.
  4. Connect your device's charging cable to the appropriate port (USB-A or USB-C) on the power bank base.
  5. Ühendage kaabli teine ​​ots seadmega.
  6. Seade peaks laadima hakkama.
A smartphone charging via a wired connection to the TYLT Power Bottle 2.0 power bank base, with the bottle standing upright.

Figure 6: Wired charging a smartphone using the power bank base.

Aku taseme kontrollimine:

Press the power button on the power bank base to illuminate the LED indicator lights, showing the remaining charge. Four lights indicate a full charge, three lights indicate approximately 75% charge, and so on.

5. Hooldus ja hooldus

5.1 Cleaning the Bottle

5.2 Caring for the Power Bank

The TYLT Power Bottle 2.0 standing on a wet surface, demonstrating its waterproof power bank base.

Figure 7: The power bank base is designed to be waterproof, allowing for safe use around liquids.

6. Veaotsing

ProbleemVõimalik põhjusLahendus
Seade ei lae juhtmevabalt.Device not aligned correctly; power bank low on charge; device not wireless charging compatible.Ensure device is centered on the power bank. Recharge the power bank. Verify your device supports magnetic-enabled wireless charging.
Seade ei lae juhtmega ühenduse kaudu.Cable faulty; power bank low on charge; port dirty.Try a different charging cable. Recharge the power bank. Check ports for debris and clean gently if necessary.
Pudel lekib.Cap not tightened properly; seal damaged or missing.Ensure the cap is securely tightened. Check the silicone seal inside the cap for proper placement and any damage. Replace if necessary.
Jook ei püsi kuum/külm.Cap not sealed; bottle damaged.Ensure the cap is tightly sealed. Inspect the bottle for dents or damage that could compromise insulation.
Power bank not turning on/off consistently.Incorrect button press; internal issue.The power button is touch-sensitive and may require a double-tap to activate/deactivate. If issues persist, contact customer support.

7. Tehnilised andmed

8. Garantii ja tugi

8.1 Garantii teave

For detailed warranty information regarding your TYLT Power Bottle 2.0, please refer to the official TYLT website or contact TYLT customer support directly. Warranty terms and conditions may vary.

8.2 Klienditugi

If you encounter any issues or have questions not covered in this manual, please contact TYLT customer support for assistance. Contact information can typically be found on the official TYLT webveebilehel või toote pakendil.

Võite külastada TYLT Store on Amazon Lisateabe saamiseks toote kohta ja võimalike tugilinkide saamiseks.

Seotud dokumendid - Power Bottle 2.0

Preview TYLT pudel 2.0 + kõlar Kasutusjuhend ja omadused
Põhjalik kasutusjuhend TYLT Bottle 2.0 jaoks, millel on Bluetooth 5.0 kõlar. Sisaldab toote omadusi, kasutusjuhiseid, ohutusnõudeid, puhastusjuhiseid ja FCC vastavusteavet.
Preview TYLT ACTIVE Bottle 2.0: nutikas veepudel akupangaga
Avasta TYLT ACTIVE Bottle 2.0 – vastupidav ja isoleeritud veepudel, millel on 5,700 mAh eemaldatav aku juhtmevabaks ja juhtmega laadimiseks. Loe lähemalt selle omaduste, kasutamise ja puhastusjuhiste kohta.
Preview TYLT PowerPlanti kasutusjuhend: kaasaskantava laadija juhised
Põhjalik kasutusjuhend TYLT PowerPlant kaasaskantava laadija kohta. Siit saate teada, kuidas oma seadmeid laadida, aku mahtuvust kontrollida ja PowerPlanti ennast laadida. Sisaldab tehnilisi andmeid ja ohutushoiatusi.
Preview TYLT Bell Speaker MagSafe Compatible Bluetooth Speaker Stand User Manual
Official user manual for the TYLT Bell Speaker, a MagSafe compatible Bluetooth speaker and stand. Includes features, operation, and FCC compliance information.
Preview TYLT Magboom kõlar koos MagSafe juhtmevaba laadijaga – kasutusjuhend
See juhend annab teavet TYLT Magboom kõlari kohta, mis on Bluetooth 5.3 kõlar koos MagSafe'iga ühilduva juhtmevaba laadimise võimalusega. Siit leiate teavet selle funktsioonide, töö ja FCC nõuetele vastavuse kohta.
Preview TYLT QIWCS15BK-AAT 15W kiire juhtmevaba laadimisalus - Kasutusjuhend
TYLT QIWCS15BK-AAT 15W kiire juhtmevaba laadimisaluse ametlik kasutusjuhend ja tehnilised andmed. Sisaldab seadistusjuhendit, ohutusnõudeid, ühilduvuse üksikasju ja FCC vastavusteavet.