Toode läbiview
The Topaz 2-foot LED Linear Strip Luminaire is designed for versatile lighting applications in commercial facilities. This fixture features a 3-CCT (Correlated Color Temperature) selectable switch, allowing users to choose between 3500K, 4000K, and 5000K to achieve the desired lighting environment. Its design facilitates direct surface mounting and includes press-to-release buttons for tool-less access to the wiring compartment, simplifying installation in various settings such as healthcare facilities, offices, and retail locations. It is suitable for both new construction and remodeling projects.
Olulised ohutusjuhised
Please read and understand all instructions before installing or operating this fixture. Failure to follow these instructions may result in electric shock, fire, or other hazards.
- HOIATUS: Elektrilöögi oht. Enne paigaldamist või hooldamist ühendage toide kaitsmest või kaitselülitist lahti.
- Paigalduse peab teostama kvalifitseeritud elektrik vastavalt kõikidele riiklikele ja kohalikele elektrieeskirjadele.
- Veenduge, et toite mahttage is compatible with the fixture's requirements (120-277V AC).
- Ärge paigaldage soojusallikate lähedale ega liigse niiskusega kohtadesse.
- Ärge käsitsege pingestatud seadet märgade kätega.
- See seade on mõeldud ainult siseruumides kasutamiseks.
Pakendi sisu
Enne paigaldamise alustamist veenduge, et kõik komponendid on olemas:
- LED Linear Strip Luminaire (1 unit)
- Kinnitusdetailid (kruvid, ankrud)
- Kasutusjuhend (see dokument)
Image: The Topaz LED 2' Linear Strip Luminaire shown with included mounting screws and a mounting plate. The fixture is white with a translucent diffuser, and wiring is visible at one end.
Paigaldusjuhend
Follow these steps for proper installation of your LED Linear Strip Luminaire.
1. samm: valmistuge installimiseks
- Turn off power at the circuit breaker or fuse box before starting.
- Pakkige seade lahti ja kontrollige kahjustuste suhtes.
- Identify the desired mounting location. Ensure the surface is suitable for supporting the fixture's weight.
2. samm: kinnitusseadme paigaldamine
- Position the fixture against the mounting surface and mark the locations for mounting screws.
- Vajadusel puurige juhtaugud ja kipsplaadile paigaldamisel sisestage seinaankrud.
- Secure the fixture to the mounting surface using the provided screws. Ensure it is firmly attached.
3. samm: juhtmestiku ühendused
- Access the wiring compartment by pressing the release buttons on the fixture. This allows tool-less access.
- Ühendage elektrijuhtmed:
- Ühendage must juhe kinnitusdetailist kuni otseülekanne/kuum wire from the supply.
- Ühendage valge juhe kinnitusdetailist kuni neutraalne wire from the supply.
- Ühendage green/ground juhe kinnitusdetailist kuni maapinnale wire from the supply.
- Veenduge, et kõik ühendused oleksid kindlad, kasutades sobivaid juhtmeühendusi.
- Carefully tuck all wires into the wiring compartment and close the cover securely.
Step 4: CCT Selection (Before Final Power On)
Before restoring power, select your desired Correlated Color Temperature (CCT) using the integrated dip-switch. This switch is located on the fixture, typically near the wiring compartment.
Pilt: Lähivõte view of the CCT selectable switch on the side of the LED linear strip. The switch has three positions labeled 3500K, 4000K, and 5000K, allowing the user to choose the color temperature.
- 3500K: Soe valge
- 4000K: Cool White / Neutral White
- 5000K: Päevavalgus
Slide the switch to your preferred CCT setting. Once set, restore power to the circuit.
Kasutusjuhised
Once installed and powered, the Topaz LED Linear Strip Luminaire will operate according to the selected CCT setting. If you wish to change the CCT, you must first disconnect power to the fixture at the circuit breaker, then access the CCT selectable switch as described in Step 4 of the Installation Guide, adjust the setting, and finally restore power.
Hooldus
The Topaz LED Linear Strip Luminaire requires minimal maintenance.
- Puhastamine: Enne puhastamist veenduge, et toide on välja lülitatud. Kasutage pehmet, kuiva või kergelt kuiva lappi.amp cloth to wipe the exterior of the fixture. Do not use abrasive cleaners or solvents.
- Lamp Asendamine: The LED light source is integrated and not user-replaceable. The fixture is designed for a long operational life of 50,000 hours.
Veaotsing
If you encounter issues with your LED Linear Strip Luminaire, refer to the following common problems and solutions:
| Probleem | Võimalik põhjus | Lahendus |
|---|---|---|
| Valgusti ei sütti. | No power supply; loose wiring; faulty fixture. | Check circuit breaker/fuse. Verify all wiring connections are secure. If problem persists, contact a qualified electrician or customer support. |
| Valgus väreleb või on hämar. | Loose wiring; incompatible dimmer (if applicable); voltage kõikumised. | Check wiring connections. Ensure dimmer is LED compatible. Consult an electrician for voltage küsimusi. |
| Incorrect CCT (color temperature). | CCT-lüliti on valesti seadistatud. | Turn off power, open wiring compartment, and adjust the CCT selectable switch to the desired setting (3500K, 4000K, or 5000K). Restore power. |
Tehnilised andmed
| Kaubamärk | Topaas |
| Mudeli number | F-L2/20W/CTS/D-87 |
| Wattage | 20 vatti |
| CCT Valitav | 3500K, 4000K, 5000K (via 3-way dip-switch) |
| Lumeni väljund | 2600/2800/2700 Lumens (depending on CCT) |
| Hinnatud elu | 50,000 tundi |
| Paigaldamine | Otsene pinnakinnitus |
| UPC / EAN | 751338039407 |
Garantii ja tugi
This Topaz product is backed by a manufacturer's warranty against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the documentation provided with your purchase or visit the official Topaz websaidile.
For technical support, troubleshooting assistance, or warranty claims, please contact Topaz customer service. Keep your purchase receipt and model number (F-L2/20W/CTS/D-87) readily available when contacting support.
Note: Contact information for Topaz can typically be found on their official websait või toote pakend.
