PPLEE CR1008iR

PPLEE RGB Vibrating Alarm Clock User Manual

Model: CR1008iR

Kaubamärk: PPLEE

Toode läbiview

The PPLEE RGB Vibrating Alarm Clock (Model CR1008iR) is designed to provide a reliable and versatile wake-up experience. It features a large digital display with customizable RGB colors, multiple alarm modes including a powerful bed shaker, and convenient charging ports. This manual provides instructions for setup, operation, and maintenance.

PPLEE RGB Vibrating Alarm Clock with Bed Shaker

Image: The PPLEE RGB Vibrating Alarm Clock with its bed shaker unit, showcasing its features like RGB display, vibrator, night light, adjustable brightness, dual chargers, snooze, and 12/24H format.

Seadistamine

1. Toiteühendus

Connect the provided power adapter to the DC IN port on the back of the alarm clock and plug it into a standard 100-240V AC outlet. The clock display will illuminate.

2. Aku varu paigaldamine

For backup functionality during power outages, insert 2 AAA batteries (not included) into the battery compartment on the bottom of the clock. These batteries preserve time and alarm settings and activate the alarm during power loss, but do not power the display or charging ports.

Alarm clock with battery compartment open, showing AAA batteries and power adapter connection

Image: The alarm clock connected to AC power, with an illustration of the battery compartment for 2 AAA batteries (not included) for backup functionality.

3. Bed Shaker Connection

Plug the bed shaker unit into the designated port on the back of the alarm clock. Place the bed shaker under your pillow or mattress for effective vibration.

4. Aja määramine

  1. Press the 'SET TIME' button. The display will start flashing.
  2. Press the 'HOUR' and 'MIN' buttons to adjust the time.
  3. Press 'SET TIME' again to save, or wait 5 seconds for automatic confirmation.

Video: An official product video demonstrating the PPLEE RGB Vibrating Alarm Clock for Bedroom with Bed Shaker, including how to set the time and alarm.

5. Alarmi seadistamine

  1. Switch the 'ALARM' button towards the left 'ON' side.
  2. Press the 'SET ALARM' button. The alarm indicator will light up, and the display starts flashing.
  3. Then press 'HOUR' and 'MIN' buttons to set the alarm time.
  4. Press 'SET ALARM' again to save, or wait 5 seconds for automatic confirmation.

Kasutusjuhised

1. Häirerežiimid

The alarm clock offers three wake-up modes:

  • Ainult vibratsioon: The bed shaker activates without sound.
  • Buzzer Only: The audible alarm sounds.
  • Vibrate/Buzz Combo: Both the bed shaker and audible alarm activate simultaneously.

Select your preferred mode using the 'BUZZ/VIB' switch on the back of the unit.

Alarm clock showing three wake-up modes: bed shaker only, buzzer only, and both

Image: Visual representation of the three alarm modes: wake up only by bed shaker, wake up only by buzzer sound, and wake up by both bed shaker and buzzer sound.

2. Ekraani heledus

Adjust the 7-level screen brightness (0%-100%) using the 'DIMMER' button on the back of the clock to suit your preference, day or night.

Alarm clock display showing different brightness levels from 0% to 100%

Image: The alarm clock display demonstrating various brightness levels, from 0% (dimmest) to 100% (brightest).

3. RGB Color Modes for Display

The digital display offers 10 dynamic RGB color modes, including 6 static colors and 4 dynamic options. Cycle through these options to personalize the clock's appearance.

Alarm clock displays showing 10 different RGB color modes

Image: A collection of alarm clock displays showcasing 10 different RGB color modes, including static and dynamic options.

4. Night Light Modes

The clock features an 8-mode/7-color night light with 3 adjustable brightness settings. Activate and cycle through the night light options by pressing the 'SNOOZE-LIGHT' bar on top of the clock.

Alarm clock with night light illuminated in various colors

Image: The alarm clock with its night light feature active, displaying different color modes and illustrating its use as an ambient light source.

5. Edasilükkamise funktsioon

When the alarm sounds, press the large 'SNOOZE-LIGHT' bar on top of the clock to activate a 9-minute snooze. The alarm will temporarily pause and resume after 9 minutes.

Person pressing the snooze button on the alarm clock

Image: A person reaching to press the large 'SNOOZE-LIGHT' bar on the alarm clock, indicating the easy-to-use snooze function.

6. 12/24 tunni formaat

To switch between 12-hour and 24-hour time formats, press and hold the 'SET TIME' button for 2 seconds. The default setting is 12-hour format.

7. Suveaeg (DST)

The clock supports Daylight Saving Time. Refer to the specific instructions in the full manual for activating or deactivating DST mode.

8. USB ja C-tüüpi laadimispordid

The alarm clock is equipped with one USB output port and one Type-C output port on the back. These ports can be used to charge compatible electronic devices.

Alarm clock with USB and Type-C charging ports being used to charge smartphones

Image: The alarm clock displaying its dual output ports (USB and Type-C) with smartphones connected and charging, highlighting its convenience.

Hooldus

1. Puhastamine

To clean the alarm clock, gently wipe the surface with a soft, dry cloth. Avoid using abrasive cleaners, solvents, or harsh chemicals, as these may damage the finish or electronic components.

2. Aku vahetamine

Kui kellal esineb sagedast voolukatkestusttages or if the backup function is not working, replace the 2 AAA batteries in the battery compartment. Ensure correct polarity when inserting new batteries.

Veaotsing

ProbleemVõimalik põhjusLahendus
Kella ekraan on välja lülitatud või vilgub.No AC power; loose power connection.Veenduge, et toiteadapter on kindlalt kella ja töötava pistikupesaga ühendatud.
Äratus ei helise/vibreeri.Alarm is off; incorrect alarm mode selected; volume too low; bed shaker not connected.Verify the alarm is set to ON. Check the 'BUZZ/VIB' switch for the desired mode. Adjust alarm volume. Ensure bed shaker is connected.
Aeg/seaded kaovad pärast voolukatkestusttage.No backup batteries; dead backup batteries.Paigaldage või vahetage välja 2 AAA varupatareid.
USB/Type-C charging not working.Clock not connected to AC power; device incompatible; cable faulty.Ensure the clock is connected to AC power. Verify device compatibility and try a different charging cable.

Tehnilised andmed

  • Mudel: CR1008iR
  • Kaubamärk: PPLEE
  • Kuva tüüp: Digitaalne LED
  • Ekraani suurus: 7.5 inches (digits)
  • Ekraani heledus: 7 taset (0%-100%)
  • Ekraani värvid: 10 RGB modes (6 static, 4 dynamic)
  • Öövalgus: 8 modes / 7 colors, 3 adjustable brightness settings
  • Häirerežiimid: Vibration, Buzzer, or Vibrate/Buzzer Combo
  • Sumisti helitugevus: Up to 110dB, adjustable (Low, Medium, High)
  • Bed Shaker Cable Length: 71 tolli
  • Edasilükkamise kestus: 9 minuti
  • Ajavorming: 12H/24H valitav
  • Toiteallikas: Juhtmega elektriline (vahelduvvool 100–240 V)
  • Aku varundamine: 2 x AAA batteries (not included) for settings and alarm during power outage
  • Laadimisportid: 1 x USB-A, 1 x USB-C
  • Toote mõõtmed: 6.46 cm lai ja 3.39 cm kõrge
  • Materjal: Plastikust
  • Kauba kaal: 8.8 untsi

Garantii

Please refer to the product packaging or the official PPLEE website for detailed warranty information. Typically, products come with a limited manufacturer's warranty covering defects in materials and workmanship under normal use.

Toetus

For technical assistance, troubleshooting, or customer service inquiries, please contact PPLEE customer support through the retailer where the product was purchased or visit the official PPLEE websait kontaktteabe saamiseks.

Seotud dokumendid - CR1008iR

Preview PPLEE CR1008i Digital LED Alarm Clock with Bed Shaker User Manual
User manual for the PPLEE CR1008i Digital LED Alarm Clock with Bed Shaker, covering setup, operation, features, and warranty information.
Preview PPLEE CR1018i Alarm Clock with USB Charger - User Manual
Detailed user manual for the PPLEE CR1018i alarm clock, featuring dual alarms, USB charging, dimmer, and bed shaker. Learn how to set time, alarms, volume, DST, and use the vibrator function.
Preview PPLEE CR1008 digitaalse LED-äratuskella kasutusjuhend
Põhjalik kasutusjuhend PPLEE CR1008 digitaalse LED-äratuskella kohta. See juhend kirjeldab seadistamist, aja ja äratuse seadistamist, öövalgustuse funktsioone, USB-laadimisvõimalusi, suveaja reguleerimist ja garantiiteavet, mille on esitanud PPLEE ja Yisong E-commerce Co., Ltd.
Preview PPLEE CR1018 Mirror Alarm Clock with USB Charger - User Manual
Comprehensive user manual for the PPLEE CR1018 Mirror Alarm Clock with USB Charger. Learn how to set time, alarms, adjust brightness, use USB charging, and understand its features. Create your perfect sleep environment.
Preview PPLEE CR1013 Wake-Up Alarm Clock User Manual
Comprehensive user manual for the PPLEE CR1013 Wake-Up Alarm Clock, detailing setup, alarm settings, sunrise simulation, night light, white noise functions, and USB charging.
Preview PPLEE CR1001E Alarm Clock with USB Charger - User Manual
Comprehensive user manual for the PPLEE CR1001E digital alarm clock. Learn how to set time, alarms, use the dimmer, DST, and USB charging features. Features a large LED display and battery backup.