Sena 10S mootorratta Bluetooth-peakomplekti sidesüsteemi kasutusjuhend

1. Toote lõppview

The Sena 10S Bluetooth motorcycle headset and intercom system kit is designed to facilitate seamless communication among riders. It supports full duplex, dual pairing for clear and natural conversations.

Peamised omadused:

• Bluetooth 4.1 and Universal Intercom for broad compatibility.
• Crystal-clear HD audio with Advanced Noise Control for superior sound quality.
• Intercom communication range of up to 1.6 km (1.0 mi) in open terrain.
• Supports up to 4 riders for group communication.
• Smartphone pairing for music, GPS navigation, and phone calls.
• Talk time of 12 hours on a single charge.

Joonis 1.1: Esiosa view of the Sena 10S Motorcycle Bluetooth Headset.

2. Pakendi sisu

The Sena 10S Communication System package typically includes the following items:

• Sena 10S Headset Unit(s)
• Kõlarikomplekt
• Poomikrofon
• Juhtmega mikrofon
• Paigaldus Clamp komplekt
• USB toite- ja andmekaabel
• Helikaabel
• Kõlarite takjapadjad
• Mikrofoni käsnad

Figure 2.1: All components included in the Sena 10S package.

3. Seadistamine ja installimine

3.1 Seadme laadimine

Before initial use, fully charge the Sena 10S headset. Connect the provided USB power & data cable to the headset's charging port and a USB power source. A full charge typically takes approximately 3 hours. The LED indicator will change color to indicate charging status.

Joonis 3.1: Külg view of the Sena 10S unit, showing the USB charging port.

3.2 Mounting on a Helmet

The Sena 10S can be mounted on most motorcycle helmets using the included clamp kit. Follow these general steps:

1. Keerake lahti klambri tagaküljel olevad kruvidamp üksus.
2. Lükake clamp unit between the outer shell and the inner padding of your helmet, positioning it on the left side.
3. Tighten the screws to secure the clamp.
4. Attach the main headset unit to the clamp.
5. Install the speakers inside the helmet, aligning them with your ears. Use the Velcro pads if necessary.
6. Connect the microphone (boom or wired) to the headset unit and position it appropriately for clear voice pickup.

Figure 3.2: Sena 10S headset mounted on a motorcycle helmet.

4. Kasutusjuhised

4.1 Toide sisse/välja

• Toide sisse: Vajutage ja hoidke telefoninuppu ja kiirklahvi üks sekund all.
• Toide välja: Puudutage samaaegselt telefoninuppu ja kiirklahvi.

4.2 Helitugevuse reguleerimine

Helitugevuse suurendamiseks keerake menüünuppu päripäeva ja vähendamiseks vastupäeva.

4.3 Bluetoothi ​​sidumine (nutitelefon)

To pair your smartphone with the Sena 10S for music, GPS, and phone calls:

1. With the headset off, press and hold the Phone Button for 5 seconds until the LED flashes red and blue alternately.
2. On your smartphone, enable Bluetooth and search for devices.
3. Select 'Sena 10S' from the list of found devices.
4. If prompted, enter '0000' for the PIN.

4.4 Intercomi side

The Sena 10S supports intercom communication with up to 4 riders. Ensure all devices are powered on and within range.

• Pairing with another Sena headset: Press and hold the Jog Dial of both units for 5 seconds until the LEDs flash red. Tap the Jog Dial on either unit to complete pairing.
• Intercomi alustamine/lõpetamine: Tap the Jog Dial once to start or end a conversation with the first paired intercom friend. Tap twice for the second, and three times for the third.

4.5 Music Streaming and Phone Calls

• Esita/peata muusika: Vajutage ja hoidke Jog Dial 1 sekund all.
• Kõnele vastamine/lõpetamine: Puudutage telefoninuppu.
• Häälvalimine: Vajutage ja hoidke telefoni nuppu 3 sekundit all.

5. Hooldus ja hooldus

To ensure the longevity and optimal performance of your Sena 10S headset, follow these maintenance guidelines:

• Hoidke seadet kuivana. Niiskus võib kahjustada sisemisi vooluringe.
• Ärge kasutage seadme puhastamiseks tugevatoimelisi kemikaale, puhastuslahusteid ega tugevaid puhastusvahendeid.
• Clean the microphone and speaker grilles gently with a soft, dry cloth.
• Hoidke seadet jahedas ja kuivas kohas, kui seda ei kasutata.
• Aku korrashoiu tagamiseks laadige akut regulaarselt, isegi kui seda ei kasutata.

6. Veaotsing

If you encounter issues with your Sena 10S, try the following steps:

• Toide puudub: Ensure the battery is charged. Connect to a power source and check if the charging indicator lights up.
• Heli puudub/madal helitugevus: Check volume settings on both the headset and your connected device. Ensure speakers are correctly positioned.
• Intercom ei ühendu: Verify both units are powered on and within range. Re-attempt intercom pairing.
• Bluetoothi ​​katkestamine: Ensure your paired device is within range. Try re-pairing the device.
• Seadme lähtestamine: If issues persist, perform a factory reset (refer to the full user manual for specific instructions on your model).

7. Tehnilised andmed

8. Ametlik tootevideo

9. Garantii ja tugi

For detailed warranty information, please refer to the warranty card included in your product packaging or visit the official Sena website. For technical support, troubleshooting assistance, or further inquiries, please contact Sena customer service through their official channels.