Veepeak L14-30R

Veepeak 30 Amp Flanged Outlet NEMA L14-30R Instruction Manual

Model: L14-30R

Sissejuhatus

This manual provides essential information for the safe and proper installation, operation, and maintenance of your Veepeak 30 Amp Flanged Outlet NEMA L14-30R Locking Receptacle. Please read all instructions carefully before installation and use. Retain this manual for future reference.

Ohutusteave

HOIATUS: Electrical shock hazard. Improper installation or use can result in serious injury or death. Always follow local electrical codes and consult a qualified electrician if you are unsure about any part of the installation process.

  • Always disconnect power at the circuit breaker or fuse box before installing or servicing this device.
  • Ensure all wiring connections are secure and correct according to the wiring diagram and local codes.
  • Ärge ületage seadme määratud elektrilisi nimivõimsusi.
  • This product is designed for use with NEMA L14-30P compatible plugs only.
  • Keep the weatherproof cap closed when the outlet is not in use to protect against moisture and dust.

Pakendi sisu

  • 1 x Veepeak 30 Amp NEMA L14-30R Flanged Outlet
  • Paigalduskruvid

Tehnilised andmed

SpetsifikatsioonVäärtus
Ampajastu30 Amps
Voltage125/250 volti vahelduvvool
NEMA konfiguratsioonL14-30R
Postid / juhtmed3 Pole, 4 Wire Grounding
Maksimaalne koormus7500 vatti
Soovitatav traadimõõtur10 AWG/4C
MaterjalPolüvinüülkloriid (PVC)
SertifikaadidETL Listed (Conforms to UL & CSA standards)
Nõutav augu suurus2.5 tolli

Seadistamine ja installimine

Vajalikud tööriistad: Screwdriver, wire strippers, drill (for mounting hole), appropriate drill bit.

  1. Paigalduskoha ettevalmistamine: Choose a suitable, dry location for installation. Drill a 2.5-inch diameter hole for the receptacle body. Ensure there is enough space behind the mounting surface for wiring connections.
  2. Juhtmete ühendused:

    Refer to the wiring diagram below and the color-coded terminals on the back of the receptacle. Strip approximately 1/2 inch of insulation from each wire. Insert the wires into the corresponding terminals and tighten the screws securely. Ensure no bare wire strands are exposed outside the terminals.

    Tagasi view of the Veepeak L14-30R flanged outlet showing color-coded wiring terminals.

    Pilt: Tagumine view of the L14-30R outlet, displaying the four color-coded terminals for wiring connections (Green for Ground, White for Neutral, Red and Black for Hot).

    NEMA L14-30R wiring diagram showing X, Y, W, G terminals for 125/250 Volt, 30 Amp ühendus.

    Image: NEMA L14-30R configuration diagram. 'X' and 'Y' are hot lines (125V each to neutral, 250V between them), 'W' is neutral, and 'G' is ground.

    • Roheline (K): Maandusjuhe.
    • Valge (W): Neutraalne juhe.
    • Black (X): Hot wire (Line 1).
    • Red (Y): Hot wire (Line 2).
  3. Paigaldage pistikupesa: Insert the receptacle body into the drilled hole. Secure the flanged outlet to the mounting surface using the provided screws. Ensure it is flush and stable.
  4. Toite taastamine: Once installation is complete and all connections are verified, restore power at the circuit breaker.
Esiosa view of the Veepeak L14-30R flanged outlet with the weatherproof cap open, showing the locking receptacle.

Pilt: Esikülg view of the Veepeak L14-30R flanged outlet with its weatherproof cap open, revealing the NEMA L14-30R locking receptacle.

Kasutusjuhised

  1. Korgi avamine: Lift the weatherproof cap to access the receptacle.
  2. Connecting a Plug: Align the NEMA L14-30P plug with the receptacle. Insert the plug and twist clockwise to lock it into place. Ensure the plug is fully seated and locked.
  3. Disconnecting a Plug: Twist the plug counter-clockwise to unlock, then pull it straight out from the receptacle.
  4. Closing the Cap: When the outlet is not in use, ensure the weatherproof cap is securely closed over the receptacle to protect it from environmental elements like rain, snow, and dust.
Esiosa view of the Veepeak L14-30R flanged outlet with the weatherproof cap closed, protecting the receptacle.

Pilt: Esikülg view of the Veepeak L14-30R flanged outlet with its weatherproof cap securely closed, providing protection.

Hooldus

Regulaarne hooldus tagab optimaalse jõudluse ja ohutuse.

  • Puhastamine: Periodically clean the exterior of the outlet with a damp cloth. Do not use abrasive cleaners or solvents. Ensure the cap is closed during cleaning.
  • Ülevaatus: Regularly inspect the outlet for any signs of damage, wear, or corrosion. Check the weatherproof cap for proper sealing.
  • Ühenduse kontroll: Annually, or if issues arise, disconnect power and check the wiring connections for tightness. Loose connections can cause overheating.

Veaotsing

  • Toide puudub:
    • Kontrollige vooluringi kaitselülitit või kaitset. Lähtestage, kui see on rakendunud.
    • Veenduge, et toiteallikas on aktiivne.
    • Veenduge, et pistik on pistikupessa täielikult sisestatud ja lukustatud.
  • Lahtine ühendus:
    • If the plug feels loose or power is intermittent, disconnect power and inspect the wiring connections at the back of the receptacle for tightness.
    • Inspect the plug on the appliance for damage.
  • Damage to Outlet:
    • If the outlet housing or terminals show signs of damage, cracking, or burning, discontinue use immediately and replace the unit.

Kui tõrkeotsingu juhised probleemi ei lahenda, pöörduge kvalifitseeritud elektriku poole.

Garantii ja tugi

Veepeak provides a one-year hassle-free replacement warranty for this product. For warranty claims or customer service inquiries, please contact Veepeak customer support through the retailer where the product was purchased or visit the official Veepeak websaidile.

Seotud dokumendid - L14-30R

Preview Veepeak OBDCheck VP11 KKK ja Fehlerbehebung
Umfassende KKK ja üksikasjalikud andmed Veepeaki OBDCheck VP11 (V2.2509) kohta. Finden Sie Antworten auf häufige Fragen zur Compatibilität, Verbindung und Nutzung mit verschiedenen Fahrzeugen und Apps.
Preview OBDCheck BLE+ (PLUS) V3.2601: FAQ & Troubleshooting Guide
Comprehensive FAQ and troubleshooting guide for the Veepeak OBDCheck BLE+ (PLUS) V3.2601 OBD-II scanner. Covers vehicle compatibility, app usage, connection issues, and common problems for iOS and Android devices.
Preview OBDCheck BLE KKK ja tõrkeotsingu juhend
Veepeak OBDCheck BLE OBD-II skänneri põhjalik KKK ja tõrkeotsingu juhend. Leidke vastused levinud küsimustele rakenduste ühilduvuse, sõidukitoe, ühendusprobleemide ja kasutamise kohta.
Preview Veepeak OBDCheck BLE kasutusjuhend
Veepeak OBDCheck BLE Bluetooth OBD II skänneri kasutusjuhend, mis hõlmab sõiduki ühilduvust, rakenduste soovitusi, seadistusjuhendit, KKK-d, tõrkeotsingut, garantiid ja vastutusest loobumist.
Preview Veepeak OBDCheck VP11 kasutusjuhend ja juhend
Veepeak OBDCheck VP11 OBD-II skaneerimisvahendi põhjalikud kasutusjuhised, mis hõlmavad sõidukite ühilduvust, rakenduste soovitusi, seadistamist, KKK-sid, tõrkeotsingut ja garantiiteavet.
Preview VEEPEAK OBDCheck VP11 kasutusjuhend: funktsioonide, seadistamise ja tõrkeotsingu juhend
Põhjalik kasutusjuhend VEEPEAK OBDCheck VP11 Bluetooth OBD2 diagnostikaskanneri kohta. Siit leiate teavet selle funktsioonide, seadistusjuhiste, ühilduvate sõidukite ja rakenduste, tõrkeotsingu näpunäidete ja tugiteabe kohta.