Sissejuhatus
Wampler Catacombs is a programmable, all-in-one delay and reverb pedal designed to provide a wide range of time-based effects for musicians. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your Catacombs pedal.
Toode läbiview
The Catacombs pedal integrates 11 popular delay and reverb sounds into a single, intuitive unit. It features studio-quality 48 kHz sampling rate with 24-bit audio conversion, 8 onboard preset locations, and MIDI compatibility for up to 128 total presets.
Joonis 1: Esiosa view W-stampler Catacombs pedal, showing controls for delay and reverb effects, input/output jacks, and footswitches.
Joonis 2: Nurga all view W-stampler Catacombs pedal, highlighting its compact design and various control knobs.
Seadistamine
Nõuded võimsusele
Wampler Catacombs pedal requires a standard 9V DC power supply (not included) with a center-negative barrel connector. Ensure the power supply provides sufficient current for optimal performance.
Pedaali ühendamine
- Ühendage oma instrument (nt kitarr) MONO SISSE or STEREO SISSE pedaali paremal küljel asuvasse pesasse, kasutades standardset 6,35 mm instrumendikaablit.
- Ühendage MONO OUT or STEREO OUT pedaali vasakul küljel olev tungraud oma amplifier või next efektipedaal.
- Ühendage 9V alalisvoolu toiteallikas 9V DC sisendpesa.
- For MIDI control, connect a MIDI cable to the MIDI sisend.
Kasutusjuhised
Kontrollib üleview
- Delay Type Knob: Selects between various delay types including Tape, SPC, FTE, BBD, ANLG, and DIGI.
- Reverb Type Knob: Selects between reverb types such as SHMR (Shimmer), PLT (Plate), SPR (Spring), ROOM, and HALL.
- Time/Shimmer Knob: Adjusts the delay time or shimmer intensity depending on the selected effect.
- Feedback/Decay Knob: Controls the number of delay repeats or the reverb decay time.
- Mod Rate Knob: Adjusts the modulation rate for effects with modulation.
- Delay Tone Knob: Kujundab viivituse korduste tooni.
- Reverb Tone Knob: Shapes the tone of the reverb effect.
- Bypass/ALT Footswitch: Toggles the effect on/off. Hold to access alternate functions (ALT mode).
- Preset/Save Footswitch: Cycles through presets. Hold to save current settings to a preset location.
- Tap Tempo Footswitch: Taps in the desired delay tempo.
Eelseadistuste salvestamine ja tagasikutsumine
The Catacombs pedal allows for 8 onboard preset locations. To save a preset, adjust the knobs to your desired sound, then press and hold the Preset/Save footswitch until the indicator lights confirm the save. To recall a preset, short press the Preset/Save footswitch to cycle through the saved locations.
Alternate Functions (ALT Mode)
Some knobs have alternate functions accessible by holding the Bypass/ALT footswitch. When in ALT mode, the indicator light will change (e.g., from blue to red as noted in some user feedback), allowing you to adjust secondary parameters. Release the footswitch to return to normal operation.
Hooldus
To ensure the longevity and optimal performance of your Wampler Catacombs pedal, follow these maintenance guidelines:
- Hoidke pedaali puhtana, pühkides seda pehme kuiva lapiga. Vältige abrasiivseid puhastusvahendeid ega lahusteid.
- Hoidke pedaali jahedas ja kuivas kohas, eemal otsesest päikesevalgusest ja äärmuslikest temperatuuridest.
- Lülitage toide välja, kui seadet pikemat aega ei kasutata.
- Kontrollige regulaarselt kõigi kaabliühenduste kindlat kinnitust.
Veaotsing
| Probleem | Võimalik põhjus | Lahendus |
|---|---|---|
| Pedaali vajutamisel pole heli. | Incorrect power supply, faulty cables, incorrect input/output connections. | Verify power supply is 9V DC center-negative. Check all instrument cables. Ensure input is connected to IN and output to OUT. |
| Effect is too subtle or too extreme. | Knobs are set incorrectly, or in ALT mode unintentionally. | Adjust the relevant control knobs (Time, Feedback, Tone). Check if the pedal is in ALT mode and adjust accordingly. |
| Cannot save or recall presets. | Jalglüliti vale töö. | Veenduge, et hoiate Preset/Save footswitch long enough to save. For recalling, use short presses. |
| Noise or hum. | Maandussilmus, vigane toiteallikas, häired. | Use an isolated power supply. Try different cables. Ensure proper grounding of all equipment. |
Tehnilised andmed
- Mudel: CATACOMBS
- Mõõdud: 7.25 x 5.7 x 3.75 tolli
- Kauba kaal: 1.39 naela
- Toiteallikas: Corded Electric (9V DC, center-negative, power supply not included)
- Signaali vorming: Analoog
- Audio Output Effects: Viivitus, Reverb
- Samplingi hind: 48 kHz
- Audio Bit Depth: 24-bitine
- Eelseaded: 8 onboard, 128 via MIDI
- Manufacture Location: Designed and Built in the USA
Garantii ja tugi
Wampler Pedals products are designed and built to high standards. For warranty information and technical support, please refer to the official Wampler pedaalid webveebisaidilt või võtke otse ühendust nende klienditeenindusega. Hoidke ostutõendit garantiinõuete esitamiseks.
Täiendava abi saamiseks külastage aadressi Wampler Store on Amazon.
