OSRAM Base Classic A FIL 40 LED Bulb E27 Instruction Manual

1. Toote lõppview

The OSRAM Base Classic A FIL 40 LED Bulb is a modern, energy-efficient lighting solution designed for general illumination in household and interior applications. This LED bulb provides a warm white light (2700 Kelvin) with a brightness of 470 lumens, equivalent to a traditional 40-watt incandescent bulb, while consuming only 4 watts of power. It features an E27 screw base for easy installation and a long operational life of up to 10,000 hours.

Põhifunktsioonide hulka kuuluvad:

• Pleasant Light: Delivers good light quality and instant 100% light without warm-up time.
• Tugev disain: Resistant to shocks and vibrations due to advanced LED technology.
• Pikk kasutusiga: Offers an extended operational life of up to 10,000 hours.
• Energiasäästlik: Very low energy consumption, making it highly efficient.
• Optimaalne temperatuur: Generates lower heat compared to standard incandescent bulbs.

Figure 1: OSRAM Base Classic A FIL 40 LED Bulb, showcasing its classic shape and E27 base.

2. Ohutusalane teave

• Elektriohutus: Always ensure the power supply is switched off before installing, removing, or cleaning the bulb to prevent electric shock.
• Voltage Ühilduvus: This bulb is designed for 220-240 Volts. Ensure your fixture's voltage vastab sellele nõudele.
• Dimmeri ühilduvus: See toode on not suitable for use with dimmers. Using it with a dimmer may cause damage to the bulb or the dimmer, and will void the warranty.
• Kasutamine siseruumides: Primarily for indoor use. If used outdoors, it must be installed in a suitable, enclosed outdoor fixture to protect it from elements.
• Soojuse tootmine: While LED bulbs generate less heat than incandescent bulbs, they still produce some heat. Ensure adequate ventilation around the bulb.
• Kõrvaldamine: Dispose of used bulbs according to local regulations for electronic waste. Do not dispose of with general household waste.

3. Seadistamine ja installimine

Follow these steps to safely install your OSRAM LED bulb:

1. Toide välja: Before beginning, ensure the power supply to the light fixture is completely switched off at the main switch or circuit breaker.
2. Eemalda vana pirn: If replacing an existing bulb, allow it to cool down completely before carefully unscrewing it counter-clockwise from the E27 socket.
3. Kontrollige pistikupesa: Check the E27 socket for any damage or debris. Ensure it is clean and dry.
4. Paigaldage uus pirn: Gently screw the OSRAM LED bulb clockwise into the E27 socket until it is finger-tight. Do not overtighten.
5. Toite taastamine: Kui pirn on kindlalt paigaldatud, taastage lambi toide.
6. Test: Lülitage lüliti sisse, et veenduda, et lamp töötab korralikult.

Figure 2: Close-up of the OSRAM LED bulb, highlighting the E27 screw base for installation.

4. Operatsioon

Operating the OSRAM Base Classic A FIL 40 LED Bulb is straightforward:

• Sisse/välja lülitamine: Lambipirni sisse- või väljalülitamiseks kasutage lambi külge ühendatud standardset seinalülitit.
• Vahetu valgus: The LED bulb provides instant 100% light output immediately upon switching on, with no warm-up time required.
• Mittehämardatav: As noted in the safety section, this bulb is not dimmable. It will operate at full brightness when switched on.

5. Hooldus

The OSRAM LED bulb requires minimal maintenance:

• Puhastamine: Enne puhastamist veenduge, et toide on välja lülitatud ja pirn on jahtunud. Pühkige pirni õrnalt pehme kuiva lapiga. Ärge kasutage vedelaid puhastusvahendeid ega abrasiivseid materjale.
• Asendamine: Due to its long lifespan, frequent replacement is not expected. When replacement is necessary, follow the installation steps in Section 3.
• Kasutaja poolt hooldatavaid osi pole: The bulb contains no user-serviceable parts. Do not attempt to open or repair the bulb.

6. Veaotsing

If you encounter issues with your OSRAM LED bulb, refer to the following common troubleshooting steps:

• Pirn ei sütti:
  • Ensure the power supply to the fixture is on.
  • Check that the bulb is screwed in securely into the E27 socket.
  • Test the bulb in another working fixture to rule out a faulty fixture.
  • If the bulb still does not light up, it may be faulty and require replacement.
• Vilkumine või tuhmumine:
  • Confirm that the bulb is not connected to a dimmer switch, as this bulb is not dimmable.
  • Kontrollige, kas armatuuril või juhtmestikus on lahtisi ühendusi.
  • Veenduge voltage supply is stable and within the bulb's specified range (220-240V).
• Ebatavaline müra:
  • LED bulbs are generally silent. If you hear buzzing, ensure the bulb is not on a dimmer circuit.
  • Kontrollige kinnitusdetailide lahtisi ühendusi.

7. Tehnilised andmed

Figure 3: Technical drawing illustrating the dimensions of the OSRAM LED bulb. The 'd' indicates diameter and the vertical line indicates height.

Figure 4: EU Energy Label for the LEDVANCE AC32396 (OSRAM) LED bulb, indicating an energy efficiency class of E and consumption of 4 kWh/1000h. For more details, visit the official EPREL database: EPREL-i andmebaasi link.

8. Garantii ja tugi

For warranty information and customer support, please refer to the documentation provided with your purchase or visit the official OSRAM webveebisait. Hoidke ostutõendit garantiinõuete esitamiseks.