ENDORFY Ventum 200 ARGB ATX Computer Case User Manual

1. Sissejuhatus

Thank you for choosing the ENDORFY Ventum 200 ARGB ATX Computer Case. This manual provides essential information for the proper installation, operation, and maintenance of your new computer case. Please read this manual thoroughly before beginning the assembly process to ensure optimal performance and longevity of your system.

Joonis 1.1: The ENDORFY Ventum 200 ARGB ATX Computer Case, showcasing its sleek black design with a tempered glass side panel and illuminated ARGB fans visible through the mesh front.

2. Ohutusalane teave

Always observe the following safety precautions to prevent injury and damage to your components:

• Disconnect the power supply from the wall outlet before installing or removing any components.
• Kandke antistaatilist randmepaela, et vältida tundlike elektroonikakomponentide elektrostaatilise laengu (ESD) kahjustusi.
• Handle components carefully. Avoid touching circuit boards directly.
• Veenduge, et kõik kaablid oleksid õigesti suunatud ja kinnitatud, et vältida ventilaatorite või muude liikuvate osade häirimist.
• Do not operate the computer case with the side panel removed unless performing maintenance or installation.

3. Pakendi sisu

Veenduge, et teie pakendis on kõik järgmised esemed:

• ENDORFY Ventum 200 ARGB ATX Computer Case
• Pre-installed Stratus 120 PWM ARGB Fans (x4)
• Tarvikute karp (kruvid, kaablisidemed, vahetükid, kasutusjuhend)
• Removable Dust Filters (top, front, bottom)

Joonis 3.1: Üks plahvatas view of the ENDORFY Ventum 200 ARGB case, illustrating its various components including the chassis, tempered glass side panel, mesh front panel, top and bottom dust filters, and individual fans.

4. Seadistamine ja installimine

Follow these steps for proper assembly of your computer system within the Ventum 200 ARGB case.

4.1. Removing Side Panels

To access the interior, unscrew the four thumb screws securing the tempered glass side panel. Carefully remove the panel and set it aside on a soft, flat surface to prevent scratches.

Joonis 4.1: Külg view of the ENDORFY Ventum 200 ARGB case, highlighting the tempered glass side panel which provides a clear view of internal components and is secured by four thumb screws.

4.2. Emaplaadi paigaldamine

1. Paigaldage I/O-kilp emaplaadi salve avasse korpuse seestpoolt.
2. Align your ATX motherboard with the pre-installed standoffs.
3. Kinnitage emaplaat lisatarvikute karbist leitud sobivate kruvidega.

4.3. Toiteploki (PSU) paigaldamine

1. Lükake toiteplokk korpuse tagaosas allosas asuvasse spetsiaalsesse sahtlisse.
2. Kinnitage toiteplokk korpuse tagaküljelt kruvidega.

4.4. Salvestusketta paigaldamine

The case supports multiple storage drives. Refer to the accessory box for specific mounting hardware for 2.5" SSDs and 3.5" HDDs.

4.5. Graafikakaardi ja laienduskaardi paigaldamine

1. Eemaldage korpuse tagaküljelt vajalikud PCIe pesa katted.
2. Sisestage graafikakaart või muud laienduskaardid emaplaadi PCIe-pesadesse.
3. Kinnitage kaardid kruvidega.

Joonis 4.2: Sisemine view of the ENDORFY Ventum 200 ARGB case, demonstrating ample space for a motherboard, graphics card, and other components, with pre-installed fans providing airflow.

4.6. Kaablite haldamine

Utilize the cable routing cutouts and tie-down points behind the motherboard tray to manage cables effectively. This improves airflow and aesthetics.

4.7. Ventilaatori ja radiaatori paigaldamine

The Ventum 200 ARGB supports up to 7 fans. Four Stratus 120 PWM ARGB fans are pre-installed. Additional fan and radiator configurations:

• Esikülg: Up to 3x 120mm or 2x 140mm fans, or up to 360mm radiator.
• Ülemine: Up to 2x 120mm or 2x 140mm fans, or up to 240mm radiator.
• Tagumine: 1x 120mm fan.

Joonis 4.3: Sisemine view of the case with arrows indicating the various locations for fan installation, highlighting the capacity for up to 7 fans for optimal airflow.

5. ARGB valgustuse kasutamine

The Ventum 200 ARGB features pre-installed ARGB fans that can be controlled for customized lighting effects.

5.1. ARGB kontroll

The ARGB lighting can be controlled in two ways:

• Case Controller: Use the dedicated ARGB button on the top I/O panel to cycle through various lighting modes and colors.
• Emaplaadi tarkvara: Connect the ARGB cable from the case's fan hub to a compatible 3-pin 5V ARGB header on your motherboard. Use your motherboard's RGB software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion) to synchronize and customize lighting effects.

Joonis 5.1: Close-up of the top I/O panel of the ENDORFY Ventum 200 ARGB case, showing the power button, reset button, USB 3.0 ports, audio jacks, and the dedicated ARGB control button.

6. Hooldus

Regular maintenance ensures optimal performance and extends the lifespan of your computer components.

6.1. Tolmufiltri puhastamine

The Ventum 200 ARGB case is equipped with removable dust filters on the front, top, and bottom. Regularly clean these filters to maintain optimal airflow and prevent dust buildup inside the case.

• Gently pull out the filters.
• Use compressed air or a soft brush to remove accumulated dust.
• Rinse with water if necessary (ensure completely dry before reinstallation).
• Reinstall the filters securely.

Joonis 6.1: A close-up detail of the fine mesh front panel, designed to ensure very good airflow while protecting the interior from dust penetration. This mesh is part of the removable filter system.

6.2. Üldpuhastus

Kasutage pehmet, damp cloth to wipe down the exterior of the case. Avoid abrasive cleaners or solvents. For internal cleaning, use compressed air to remove dust from components, ensuring the system is powered off and unplugged.

7. Veaotsing

See jaotis käsitleb levinud probleeme, millega võite kokku puutuda.

7.1. Pole jõudu

• Veenduge, et toiteplokk on sisse lülitatud ja korralikult seinakontakti ühendatud.
• Kontrollige kõiki emaplaadi, protsessori ja graafikakaardi toiteühendusi.
• Verify that the front panel power switch cable is correctly connected to the motherboard's header.

7.2. Fans Not Spinning / ARGB Not Lighting Up

• Check that the fans are properly connected to the fan hub or motherboard headers.
• Ensure the fan hub is receiving power (usually via SATA power connector).
• For ARGB, verify the 3-pin 5V ARGB cable is connected to a compatible motherboard header or that the case's ARGB button is being used.

7.3. Ülekuumenemise probleemid

• Puhastage kõik tolmufiltrid ja sisemised komponendid.
• Veenduge, et ventilaatorid oleksid optimaalse õhuvoolu (sisse-/väljalaske) tagamiseks õigesti suunatud.
• Veenduge, et protsessori jahuti ja graafikakaardi ventilaatorid töötavad korralikult.
• Parandage kaablihaldust, et vähendada õhuvoolu takistusi.

8. Tehnilised andmed

Detailed technical specifications for the ENDORFY Ventum 200 ARGB ATX Computer Case.

Joonis 8.1: Diagram illustrating the sleek and spacious design of the ENDORFY Ventum 200 ARGB case, capable of housing all components efficiently while maintaining a compact footprint.

9. Garantii ja tugi

ENDORFY products are designed and manufactured to the highest quality standards. For warranty information and technical support, please refer to the official ENDORFY websaidilt või võtke otse ühendust nende klienditeenindusega.

• Ametlik Websait: www.endorfy.com
• Klienditugi: Refer to the 'Support' or 'Contact Us' section on the official webpiirkondlike kontaktandmete sait.

Garantiinõuete esitamiseks säilitage ostutõend.