GLOBE Electric 32982 Motion Sensor Wall Sconce User Manual

Sissejuhatus

The GLOBE Electric 32982 1-Light Motion Sensor Wall Sconce is a weather-resistant outdoor lighting fixture designed to enhance security and ambiance. Featuring a matte black finish and clear seeded glass shade, this sconce offers 150-degree motion detection up to 30 feet away, providing brighter illumination when activated. It allows for customizable low-level light brightness settings (off, 30%, 50%, or 70%) to suit various needs and occasions. This manual provides essential information for safe installation, operation, and maintenance of your wall sconce.

Ohutusteave

HOIATUS: To avoid electric shock, ensure power is turned off at the circuit breaker before installation or servicing. All wiring connections must be in accordance with local and national electrical codes. If you are unsure about proper installation, consult a qualified electrician.

• Ärge ühendage seda seadet maandamata elektrisüsteemiga.
• Ärge ületage maksimaalset võimsusttagpirni jaoks määratud e.
• Käsitsege klaasist komponente ettevaatlikult, et vältida purunemist.
• Hoidke pakkematerjalid lastele kättesaamatus kohas.

Pakendi sisu

Enne paigaldamise alustamist veenduge, et kõik komponendid on olemas:

• 1x Wall Sconce
• 1x Glass Shade (Clear Seeded)
• Paigaldusriistvara
• Kasutusjuhend (käesolev käsiraamat)
• Note: E26/Medium Base 60W Bulb is sold separately and not included.

Figure 1: GLOBE Electric 32982 Motion Sensor Wall Sconce (Matte Black with Clear Seeded Glass Shade)

Tehnilised andmed

Figure 2: Product Dimensions for Installation Planning

Seadistamine ja installimine

This wall sconce is designed for hardwired installation. Professional installation is recommended if you are not familiar with electrical wiring.

Enne alustamist:

• Lülitage toide välja at the main circuit breaker or fuse box.
• Veenduge, et kinnituspind on puhas, kuiv ja konstruktsioonilt tugev.
• Paki kõik komponendid lahti ja kontrolli kahjustuste suhtes.

Paigaldamise etapid:

1. Kinnitage kinnitusdetailid: Secure the mounting bracket to the junction box using the provided screws. Ensure the bracket is level and firmly attached.
2. Tehke elektriühendused:
   • Ühendage seadme maandusjuhe (tavaliselt paljas vask või roheline) maja maandusjuhtmega.
   • Connect the fixture's hot wire (usually black) to the house hot wire (black).
   • Ühendage seadme neutraaljuhe (tavaliselt valge) maja neutraaljuhtmega (valge).
   • Kinnitage kõik ühendused traatmutritega ja mähkige täiendava ohutuse tagamiseks isoleerlindiga.
3. Kinnitage kinnitus: Carefully align the fixture with the mounting bracket and secure it using the provided screws or nuts. Ensure the fixture is flush against the wall.
4. Paigaldage pirn: Screw in one E26/Medium Base 60W maximum bulb (sold separately). Compatible with LED and Incandescent bulbs.
5. Klaasist varju kinnitamine: Carefully place the clear seeded glass shade onto the fixture and secure it according to the design (e.g., with retaining ring or screws).
6. Toite taastamine: Kui paigaldamine on lõppenud, lülitage kaitselülitist toide uuesti sisse.

Joonis 3: näitample of Installed Wall Sconce

Kasutusjuhised

Your GLOBE Electric Motion Sensor Wall Sconce is designed for automatic operation based on motion detection and ambient light levels.

Liikumisanduri funktsionaalsus:

• The integrated motion sensor detects movement within a 150-degree field and up to 30 feet away.
• When motion is detected, the light will illuminate at full brightness.
• The light will remain on as long as motion is detected within its range. After motion ceases, the light will turn off after a preset delay (typically a few minutes, consult specific product settings if adjustable).

Figure 4: Motion Activated Feature

Low-Level Light Brightness Adjustment:

This fixture allows you to adjust the low-level illumination when no motion is detected. This setting is typically controlled via a switch or dial on the fixture itself, or potentially through a compatible smart bulb if installed (sold separately).

• Väljas: The light remains off when no motion is detected.
• 30%: The light stays on at 30% brightness when no motion is detected.
• 50%: The light stays on at 50% brightness when no motion is detected.
• 70%: The light stays on at 70% brightness when no motion is detected.

Refer to the physical fixture for the exact location of the brightness adjustment control.

Hooldus

Regular maintenance will ensure the longevity and optimal performance of your wall sconce.

Puhastamine:

• Enne puhastamist lülitage alati kaitselülitist toide välja.
• Pühkige seadet pehme lapigaamp riie.
• Do not use abrasive cleaners or solvents, as these may damage the finish or glass.
• Clean the motion sensor lens periodically to ensure proper detection.

Pirni vahetus:

• Veenduge, et toide on kaitselüliti juures välja lülitatud.
• Enne puudutamist laske pirnil täielikult jahtuda.
• Carefully remove the glass shade to access the bulb.
• Unscrew the old bulb and replace it with a new E26/Medium Base bulb, not exceeding 60W.
• Reattach the glass shade securely.
• Taasta toide.

Veaotsing

If you experience issues with your wall sconce, refer to the following common problems and solutions:

Garantii ja tugi

This product is sold with Garantii puudub as per manufacturer specifications. For technical support or inquiries, please visit the official GLOBE Electric websaidil või võtke ühendust oma klienditeenindusega.

GLOBE Electric Official Websait: www.globe-electric.com