1. Sissejuhatus
Thank you for choosing the LifePro VibraCare Calf & Foot Massager. This device is designed to provide targeted relief and relaxation for your feet and calves. Featuring vibration and acupressure therapy, along with an optional heat function, it aims to reduce joint stiffness, alleviate discomfort, and promote better blood circulation. This manual will guide you through the proper setup, operation, and maintenance of your massager to ensure optimal performance and a soothing experience.
2. Oluline ohutusteave
Please read all instructions carefully before using the LifePro VibraCare Calf & Foot Massager. Keep this manual for future reference.
- Konsulteerige arstiga: If you have any pre-existing medical conditions, including but not limited to diabetes, neuropathy, heart conditions, or are pregnant, consult your doctor before using this device.
- Mitte meditsiiniliseks kasutamiseks: This massager is intended for personal relaxation and comfort only. It is not a medical device and should not be used to diagnose, treat, cure, or prevent any disease or health condition.
- Vältige vett: Ärge kasutage massaažiseadet vee lähedal egaamp environments. Do not immerse the device in water.
- Õige toiteallikas: Use only the provided AC adapter. Ensure the power outlet matches the voltage adapteril märgitud.
- Järelevalve: Close supervision is necessary when the massager is used by or near children, invalids, or disabled persons.
- Lõpetage kasutamine: If you experience any pain, discomfort, or unusual sensations during use, stop immediately and consult a physician.
- Hoiatus kuumuse eest: The heat function can reach temperatures between 108°-113°F. Individuals with reduced heat sensitivity should use caution. Do not use heat for prolonged periods on one area.
- Puhtus: Always ensure the device is clean and dry before and after each use.
3. Pakendi sisu
Upon unpacking your LifePro VibraCare Calf & Foot Massager, please ensure all items listed below are present and in good condition:
- LifePro VibraCare Calf & Foot Massager Unit
- Juhtmeta kaugjuhtimispult
- Vahelduvvoolu adapter
- Kasutusjuhend
- Libisemiskindel matt
4. Toote lõppview
Familiarize yourself with the components of your LifePro VibraCare massager:


- Põhiüksus: The primary device housing the motor, control panel, and foot/calf pads.
- Juhtpaneel: Located at the top of the unit, it features buttons for power, mode selection, intensity adjustment, and heat function.
- Foot/Calf Pads: Textured surfaces designed for optimal contact and acupressure points.
- Adjustable Tilt Bar: Allows you to change the angle of the massager for comfortable foot or calf positioning.
- Juhtmeta kaugjuhtimispult: Provides convenient access to all functions from a distance.
5. Seadistamine
- Paigutus: Place the massager on a flat, stable surface. For added stability and comfort, use the included non-slip mat underneath the unit.
- Toiteühendus: Connect the AC power adapter to the power input port on the massager unit. Plug the other end into a standard electrical outlet.
- Kaugjuhtimispult: Ensure the remote control has batteries installed. If not, open the battery compartment and insert the required batteries (usually AAA, not specified in data, so general advice).
- Kalde reguleerimine: The massager features an adjustable tilt bar. You can adjust the angle to suit your preferred massage position for either feet or calves.
6. Kasutusjuhised
The LifePro VibraCare offers various programs and intensity levels for a personalized massage experience.
6.1 Põhitoimingud
- Toide sisse: Vajutage toitenuppu (⏻) on the control panel or remote control to turn on the device. The display will illuminate.
- Valige programm: Use the 'P' (Program) button on the control panel or the arrow buttons on the remote to cycle through the 5 pre-programmed massage modes (P1-P5) or select a manual mode (HA).
- Reguleerige intensiivsust: Use the 'Speed' or arrow buttons on the remote to adjust the vibration intensity. There are 30 intensity levels available.
- Määra aeg: The massager typically runs for 15-minute intervals. You can adjust the massage duration using the time setting on the remote control.
- Aktiveeri kuumus: Press the Heat button (♨) on the control panel or remote to activate the soothing heat function. Press again to turn off.
- Toide välja: Vajutage toitenuppu (⏻) again to turn off the massager.
6.2 Massage Positions


- Jalamassaaž: Sit comfortably and place your bare feet on the textured pads of the massager. Adjust the tilt bar for the most comfortable angle.
- Sääre massaaž: For calf relief, you can flip the massager upside down and rest your calves on the vibrating pads. This allows for targeted vibration and acupressure on your calf muscles.
7. Hooldus
7.1 Puhastamine
- Enne puhastamist eemaldage massaažiseade alati vooluvõrgust.
- Pühkige masseerija pinda pehme, kergelt kuiva lapigaamp lapiga. Ärge kasutage abrasiivseid puhastusvahendeid, lahusteid ega karme kemikaale.
- Ensure no liquid enters the interior of the device.
- Allow the massager to dry completely before storing or next use.
7.2 Säilitamine
- Hoidke massaažiseadet jahedas ja kuivas kohas, eemal otsesest päikesevalgusest ja äärmuslikest temperatuuridest.
- Avoid placing heavy objects on the massager during storage.
- Hoidke masseerija lastele kättesaamatus kohas.
8. Veaotsing
If you encounter any issues with your LifePro VibraCare massager, please refer to the following common problems and solutions:
| Probleem | Võimalik põhjus | Lahendus |
|---|---|---|
| Massaaž ei lülitu sisse. | Pole korralikult ühendatud või on probleem pistikupesas. | Ensure the power adapter is securely plugged into both the massager and a working electrical outlet. Try a different outlet. |
| Kaugjuhtimispult ei tööta. | Patareid on tühjad või valesti sisestatud. | Replace the batteries in the remote control. Ensure they are inserted with correct polarity. Point the remote directly at the massager's sensor. |
| Vibratsioon on nõrk või ebaühtlane. | Low intensity setting or improper contact. | Increase the intensity level using the remote or control panel. Ensure your feet/calves are making full contact with the pads. |
| Küttefunktsioon ei tööta. | Küttefunktsioon pole aktiveeritud või seadmel on talitlushäire. | Press the Heat button to activate. Allow a few minutes for the heat to build up. If still not working, contact customer support. |
If the problem persists after trying these solutions, please contact LifePro customer support for assistance.
9. Tehnilised andmed
- Mudeli nimi: VibraCare Calf & Foot Massager
- Mudeli number: LP-VBRCP
- Tootja: LifePro
- Toiteallikas: Juhtmega elektriline (vahelduvvooluadapter)
- Juhtmeta: Ei
- Veekindluse tase: Ei ole veekindel
- Heat Option: Yes (108°-113°F)
- Programmid: 5 Pre-programmed modes + Manual mode
- Intensiivsuse tasemed: 30
- Ühikute arv: 1.00 Arv
10. Garantii ja tugi
LifePro is committed to providing high-quality products and excellent customer service. Your LifePro VibraCare Calf & Foot Massager comes with a manufacturer's warranty.
- Garantii teave: For detailed information regarding your product's warranty, including coverage and duration, please refer to the warranty card included in your package or visit the official LifePro websaidile.
- Klienditugi: If you have any questions, require technical assistance, or need to report an issue with your massager, please contact LifePro customer support. You can typically find contact information (phone, email, or support portal) on the LifePro websaidil või tootepakendis.
Please have your model number (LP-VBRCP) and purchase date ready when contacting support to expedite the process.





