Sanus Speaker Wall Mounts for Sonos Era 100 (Model WSWME12)

1. Sissejuhatus

This manual provides detailed instructions for the installation, operation, and maintenance of your Sanus Speaker Wall Mounts (Model WSWME12) designed specifically for Sonos Era 100 speakers. Please read these instructions carefully before beginning installation to ensure proper setup and safe use of the product.

2. Toote omadused

Integreeritud disain: Engineered to seamlessly complement the Sonos Era 100 speaker's aesthetic.
Kiire paigaldamine: Designed for an easy DIY installation, typically completed within 15 minutes.
Reguleeritav positsioneerimine: Offers tool-free tilt adjustment from 7 degrees up to 32 degrees down, and swivel adjustment of 72 degrees left or right for optimal sound direction.
Paindlikud paigaldusvõimalused: Supports both upright and inverted speaker placement to suit various room layouts and acoustic needs.
Turvaline kinnitus: Utilizes a bottom threaded insert for safe and secure speaker mounting.

3. Ohutusalane teave

Always ensure that the mounting surface can support the weight of the speaker and the mount. Use appropriate hardware for your wall type (e.g., wood stud, concrete, drywall). If you are unsure about the installation process or wall compatibility, consult a qualified professional. Do not exceed the maximum weight capacity of the mount. Keep small parts away from children.

4. Seadistamine ja installimine

Follow these steps for a secure and efficient installation of your Sanus Speaker Wall Mounts:

Valmistage ette paigalduskoht: Choose a suitable wall location, considering speaker placement for optimal sound and power outlet accessibility. Ensure there are no hidden electrical wires or plumbing in the wall at the drilling location.
Kinnitage seinaplaat: Secure the wall plate to the desired location using the provided hardware. For wood studs, drill pilot holes and use wood screws. For drywall, use appropriate anchors and screws. Ensure the plate is level before tightening.
Assemble Speaker Bracket: Attach the speaker bracket to the wall plate. Refer to the diagram below for visual guidance on how the bracket connects to the wall mount.
Ühenda kõlar: Carefully align your Sonos Era 100 speaker with the bracket. The bottom threaded insert on the speaker will secure it to the mount. Ensure the speaker is firmly attached.
Kaabli haldamine: Route the speaker's power cable through the integrated cable management channels on the mount for a clean and organized appearance.

Diagram showing the speaker mounting bracket components. — Figure 4.1: Speaker mounting bracket components.

Image showing a Sonos Era 100 speaker attached to the wall mount. — Figure 4.2: Sonos Era 100 speaker attached to the wall mount.

Image demonstrating cable management with the speaker mount. — Figure 4.3: Integrated cable management for a tidy setup.

5. Kasutusjuhend (reguleerimine)

The Sanus Speaker Wall Mount allows for flexible positioning of your Sonos Era 100 speakers to optimize your audio experience.

Kallutuse reguleerimine: The speaker can be tilted 7 degrees upwards or 32 degrees downwards. Gently push or pull the speaker to achieve the desired vertical angle.
Pööramise reguleerimine: The speaker can be swiveled 72 degrees to the left or right. Rotate the speaker horizontally to direct sound as needed.

All adjustments are tool-free, allowing for easy fine-tuning of your speaker's direction.

Diagram illustrating the tilt and swivel range of the speaker mount. — Figure 5.1: Tilt (7° up, 32° down) and Swivel (73° left/right) adjustment ranges.

Image showing a hand adjusting the tilt of a mounted speaker. — Figure 5.2: Effortless tilt adjustment for optimal sound.

6. Hooldus

To maintain the appearance and functionality of your speaker mounts:

Puhastage alust pehme ja kuiva lapiga. Vältige abrasiivseid puhastusvahendeid ega lahusteid.
Kontrollige regulaarselt kõiki kinnitusdetaile ja kruvisid, et need oleksid kindlalt ja kindlalt kinnitatud.

7. Veaotsing

If you encounter any issues with your speaker mounts, consider the following:

Kinnitus tundub lõtv: Re-check and tighten all mounting screws on the wall plate and the speaker bracket. Ensure the wall material is appropriate for the chosen hardware.
Kohandamise raskused: Ensure no cables are obstructing the movement of the mount. Apply gentle, even pressure when adjusting tilt or swivel.
Speaker not level: Verify that the wall plate was installed level. Minor adjustments can often be made by slightly loosening and re-tightening the bracket screws.

8. Tehnilised andmed

Funktsioon	Detail
Toote mõõtmed	7.36 x 3.94 x 6.29 tolli (18.7 x 10 x 16 cm)
Kauba kaal	2.68 naela (1.22 kg)
Mudeli number	WSWME12
Ühilduvad seadmed	Sonos Era 100 Speakers
Paigaldustüüp	Seinakinnitus
Värv	Must
Kaldevahemik	7° Up / 32° Down
Pööratav vahemik	72° Left / 72° Right

Diagram showing the dimensions of the speaker mount. — Figure 8.1: Key dimensions of the Sanus WSWME12 mount.

9. Garantii ja tugi

Sanus products are designed and engineered in the U.S. with over 30 years of experience in audio-visual mounting solutions. This product comes with a limited warranty. For any questions, installation assistance, or troubleshooting, Sanus offers U.S.-based expert customer care available 7 days a week.

For support, please visit the official Sanus websaidilt või võtke otse ühendust nende klienditeenindusega.

	SANUS BSSEA2 kõrgusega reguleeritava kõrgusega kõlarialus Sonos Era 100/300 jaoks - paigaldusjuhend SANUS BSSEA2 kõrgusega reguleeritava kõlarialuse ametlik kasutusjuhend, mis on mõeldud Sonos Era 100 ja Era 300 kõlaritele. Sisaldab ohutusjuhiseid, osade loendit, mõõtmeid ja samm-sammult kokkupanekujuhendit.
	SANUS WSSE1A1/WSSE1A2 Height-Adjustable Speaker Stand for Sonos Era 100 - Instruction Manual This document provides detailed instructions for assembling and using the SANUS WSSE1A1 and WSSE1A2 height-adjustable speaker stands, designed specifically for Sonos Era 100 speakers. It includes essential safety warnings, product dimensions, a list of parts and hardware, step-by-step assembly guidance, and instructions for height adjustment and cable management.
	SANUS WSSE3A1/WSSE3A2 kõrgusega reguleeritava kõlari alus Sonos Era 300™ jaoks - kasutusjuhend Üksikasjalikud juhised Sonos Era 300™ kõlaritele mõeldud SANUS WSSE3A1/WSSE3A2 kõrgusega reguleeritava kõlarialuse kokkupanekuks ja kasutamiseks. Sisaldab ohutusteavet, osade loendit ja samm-sammult kokkupanekujuhiseid.
	SANUS WSS21/WSS22 Speaker Stand Instruction Manual Official instruction manual for the SANUS WSS21 and WSS22 speaker stands, designed for Sonos One, PLAY:1, and PLAY:3 speakers. Includes assembly steps, safety information, and dimensions.
	SANUS WSFME11/WSFME12 fikseeritud kõlari seinakinnitus Sonos Era 100™ jaoks - kasutusjuhend This instruction manual provides detailed steps for installing the SANUS WSFME11 and WSFME12 fixed speaker wall mounts for Sonos Era 100™ speakers. It includes important safety information, a list of supplied parts and hardware, required tools, and step-by-step installation guides for drywall, wood stud, and concrete wall types, along with removal instructions and product dimensions.
	SANUS WSSE3A1/WSSE3A2 Height-Adjustable Speaker Stand for Sonos Era 300 - Instruction Manual Official instruction manual for the SANUS WSSE3A1/WSSE3A2 height-adjustable speaker stand designed for the Sonos Era 300 speaker. Includes safety information, parts list, dimensions, and step-by-step assembly instructions.

Sanus WSWME12