YOUTASTE Bar Stools Set of 2 Instruction Manual

Sissejuhatus

This manual provides detailed instructions for the assembly, operation, and maintenance of your YOUTASTE Bar Stools. Please read all instructions carefully before assembly and use to ensure safe and proper functionality. Keep this manual for future reference.

Image: YOUTASTE Bar Stools in a kitchen environment.

Ohutusteave

• Soovitatav maksimaalne kaal: Selle toote maksimaalne soovitatav kaal on 300 naela. Ärge ületage seda piiri.
• Gas Cap Removal: It is critical to remove the plastic gas cap from the gas lift cylinder before assembly. Failure to do so will prevent proper height adjustment.
• Õige kokkupanek: Ensure all components are correctly assembled and all screws are tightened securely. Improper assembly may result in injury or damage to the product.
• Põranda kaitse: The base features a non-slip rubber ring for floor protection and quiet use. Avoid dragging the stools to prevent damage to flooring.
• Stabiilsus: Always ensure the stool is on a flat, stable surface before use.

Pakendi sisu

Enne kokkupaneku alustamist kontrollige, et kõik osad oleksid olemas ja kahjustamata. Kui mõni osa on puudu või kahjustatud, võtke ühendust klienditoega.

• Iste (2)
• Alusplaat (2)
• Gaasitõste silinder (2)
• jalatugi (2)
• Paigaldusplaat (2)
• Screws and Allen Wrench (for assembly)
• Kasutusjuhend (1)

Image: Components and quality features of the YOUTASTE Bar Stools.

Montaažijuhised

Assembly is quick and typically takes 5-10 minutes per stool. Follow these steps:

1. Prepare the Gas Lift Cylinder: Locate the plastic gas cap on the top of the gas lift cylinder. Remove this cap before proceeding. This is crucial for the height adjustment mechanism to function.


Image: Gas cap removal from the gas lift cylinder.

2. Attach Footrest to Seat: Turn the seat upside down. Align the footrest with the pre-drilled holes on the underside of the seat. Secure it using the provided screws and Allen wrench. Ensure the longer screws are used for the front attachment points and shorter ones for the rear.
3. Insert Gas Lift into Base: Place the large circular base plate on the floor. Insert the prepared gas lift cylinder into the central hole of the base plate.
4. Istme kinnitamine gaasitõstukile: Carefully place the assembled seat (with footrest attached) onto the top of the gas lift cylinder. Apply gentle downward pressure to secure it.
5. Stabiilsuse kontrollimine: Once assembled, test the stability of the stool. Ensure all connections are firm and the stool does not wobble.

Kasutusjuhised

• Kõrguse reguleerimine: To adjust the seat height, locate the lever positioned under the seat. While seated, pull the lever upwards to lower the seat. To raise the seat, stand up and pull the lever upwards; the seat will automatically extend. Release the lever at the desired height.
• 360° pööratav: The seat is designed to swivel 360 degrees, allowing for easy rotation and interaction without moving the base of the stool.

Hooldus

• Puhastamine: Wipe the faux leather upholstery with a damp cloth. For tougher stains, use a mild soap solution and then wipe clean with a damp lapiga. Vältige tugevatoimelisi kemikaale või abrasiivseid puhastusvahendeid.
• Metallosad: Clean metal components with a soft, dry cloth. Avoid using abrasive materials that could scratch the finish.
• Regulaarsed kontrollid: Kontrollige regulaarselt kõiki kruvisid ja ühendusi, et need oleksid kindlalt kinni. Vajadusel pingutage uuesti.

Veaotsing

• Tooli kõrgus ei ole reguleeritav: Ensure the plastic gas cap has been completely removed from the gas lift cylinder. If the cap is removed and the issue persists, check for any obstructions or contact support.
• Väljaheide kõikub: Check that all screws are securely tightened. Ensure the stool is placed on a flat, even surface.
• Pööramise raskusaste: Ensure no debris is obstructing the swivel mechanism. If the issue persists, contact support.

Tehnilised andmed

Image: Detailed dimensions of the YOUTASTE Bar Stool.

Garantii ja tugi

YOUTASTE provides 24-month replacement support for bar stools. This warranty covers manufacturing defects and issues arising from normal use. It does not cover damage from misuse, improper assembly, modifications, or impact.

For questions, missing parts, or support, please contact Baolande Furniture, the manufacturer, via their official channels or the platform where the product was purchased.

Image: YOUTASTE After-Sales Service details.