Atlanta Digital LED Alarm Clock 2604/0 User Manual

Sissejuhatus

Thank you for choosing the Atlanta Digital LED Alarm Clock, Model 2604/0. This alarm clock features a large, continuously illuminated white LED display, adjustable brightness, two separate alarms with crescendo function, and a convenient USB charging port. This manual provides detailed instructions for setup, operation, and maintenance to ensure optimal performance of your device.

Seadistamine

1. Toiteühendus

Connect the provided power adapter to the DC5V port on the back of the alarm clock. Plug the adapter into a standard 230V electrical outlet. The clock requires a permanent power connection for full functionality.

Image: The Atlanta Digital Alarm Clock shown with its included power adapter and USB connection cable.

2. Aku varundamine

The alarm clock includes an integrated CR2032 button cell battery (1 CR2032 - included). This battery serves as a backup to protect programmed data (time and alarm settings) in case of a power outage. It does not power the display or alarm functions independently.

Pilt: Tagumine view of the alarm clock, highlighting the battery compartment, DC5V input, USB port, and control buttons/sliders.

Kasutusjuhised

1. Kellaaja seadmine

1. Vajutage ja hoidke all nuppu AJA MÄÄRAMINE button (located on the right side of the back panel) for 2 seconds until the display flashes.
2. Kasutage 12/24 HR button (left side of the back panel) to adjust the hours.
3. Vajutage nuppu AJA MÄÄRAMINE button again to switch to minute adjustment. Use the 12/24 HR nupp minutite reguleerimiseks.
4. Vajutage nuppu AJA MÄÄRAMINE nuppu veel kord kinnitamiseks ja aja seadistamise režiimist väljumiseks.

To switch between 12-hour and 24-hour display formats, briefly press the 12/24 HR button when not in time setting mode.

Image: Front display of the alarm clock showing the time "12:50 PM".

2. Äratuse seadistamine

The clock supports two separate alarms.

1. Vajutage ja hoidke all nuppu ALARM SET button (located on the right side of the back panel, below TIME SET) for 2 seconds until the alarm time flashes.
2. Kasutage 12/24 HR button to adjust the alarm hours.
3. Vajutage nuppu ALARM SET button again to switch to minute adjustment. Use the 12/24 HR nuppu äratuse minutite reguleerimiseks.
4. Vajutage nuppu ALARM SET nuppu veel kord kinnitamiseks ja äratuse seadistusrežiimist väljumiseks.
5. To activate or deactivate an alarm, briefly press the AL. SEES/VÄLJAS button (left side of the back panel, below 12/24HR). An indicator on the display will show if the alarm is active.

Äratuskella omadused on järgmised: Crescendo function, meaning the alarm sound starts softly and gradually increases in intensity.

3. Edasilükkamise funktsioon

Kui äratuskell kõlab, vajutage suurt nuppu UINAK button on the top of the clock. This will temporarily silence the alarm for 5 minutes. The alarm will resume after 5 minutes.

4. Ekraani heleduse reguleerimine

Adjust the display brightness using the HIMMEM slider located on the back panel. Slide it from "LOW" to "HIGH" to achieve your desired brightness level. The brightness is continuously adjustable.

5. Alarmi helitugevuse reguleerimine

Adjust the alarm sound volume using the VOLUME slider located on the back panel. Slide it from "LOW" to "HIGH" to set the desired alarm volume. The volume is continuously adjustable.

6. USB laadimisport

A USB port is located on the back of the alarm clock. You can use this port to charge other devices, such as a mobile phone. Connect your device's USB charging cable to this port.

Hooldus

• To clean the clock, use a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Hoidke seadet eemal veest ja kõrgest niiskusest.
• Vältige kella jätmist otsese päikesevalguse või äärmuslike temperatuuride kätte.
• If the backup battery needs replacement, ensure to use a CR2032 type battery.

Veaotsing

Display is too bright or too dim:

Reguleerige HIMMEM slider on the back panel. While the brightness is continuously adjustable, some users may find the minimum brightness still too high for a dark bedroom.

Clock loses time or settings during a power outage:

Ensure the CR2032 backup battery is correctly installed and functional. The backup battery preserves settings but does not power the display or alarm during an outage. If the battery is old or depleted, replace it.

Äratus ei helise:

• Check if the alarm is activated using the AL. SEES/VÄLJAS button. An indicator should be visible on the display.
• Tagada VOLUME slider is not set to "LOW" or minimum.
• Veenduge, et äratusaeg on õigesti seadistatud.

USB-laadimisport ei tööta:

Ensure the alarm clock is properly connected to a power source. The USB port requires the clock to be powered. Check the charging cable of your device.

Tehnilised andmed

Garantii ja tugi

For warranty information or technical support, please refer to the documentation provided with your purchase or contact your retailer.