MOUNTUP MU2007 Gas Spring Monitor Wall Mount Instruction Manual

1. Sissejuhatus

This manual provides detailed instructions for the installation, operation, and maintenance of your MOUNTUP MU2007 Gas Spring Monitor Wall Mount. Please read this manual thoroughly before installation to ensure correct setup and safe use. Retain this manual for future reference.

2. Ohutusalane teave

• Kandevõime: Do not exceed the maximum weight capacity of 17.6 lbs (8 kg). Exceeding this limit may result in serious injury or product damage.
• Ekraani suurus: See kinnitus on mõeldud monitoridele, mille diagonaal on 17–32 tolli.
• Seina tüüp: See kinnitus on mõeldud paigaldamiseks puitkarkassidele, betoonseintele või telliskiviseintele. ÄRGE PAIGALDAGE AINULT KIPSPLAADILE. Ensure the mounting surface can safely support the combined weight of the mount and your monitor.
• VESA ühilduvus: Ensure your monitor has VESA mounting patterns of 75x75mm or 100x100mm. If your monitor has a different VESA pattern, a VESA adapter (not included) may be required.
• Professionaalne paigaldus: Kui te pole paigaldusprotsessis või oma seina sobivuses kindel, pidage nõu kvalifitseeritud spetsialistiga.
• Liikuvad osad: The gas spring arm contains moving parts. Exercise caution during adjustment to avoid pinching or injury.

3. Pakendi sisu

Please verify that all components are present and undamaged before beginning installation. Refer to the included hardware bag for specific part identification.

Pilt: Plahvatas view of the monitor mount components, including the gas spring arm, wall plate, VESA plate, and various covers and fasteners.

4. Tehnilised andmed

5. Ühilduvuse kontroll

Before installation, confirm your monitor and wall meet the following criteria:

• Monitori suurus: Your monitor screen size should be between 17 and 32 inches.
• Jälgige kaalu: Your monitor must weigh between 4.4 lbs (2 kg) and 17.6 lbs (8 kg).
• VESA muster: Check the back of your monitor for a 75x75mm or 100x100mm square hole pattern.
• Seina tüüp: The mount must be installed on a solid wood stud, concrete wall, or brick wall. Drywall alone is not sufficient.

Pilt: Visual guide for checking monitor size (17"-32"), load capacity (4.4-17.6 lbs), and VESA pattern (75x75mm/100x100mm).

Pilt: Illustration of compatible wall types: wood stud, concrete wall, and brick wall. A warning indicates not to use anchors on drywall or wood, implying direct mounting to studs or using appropriate anchors for masonry.

6. Seadistamine ja installimine

Turvalise paigalduse tagamiseks järgige neid samme hoolikalt.

6.1 VESA plaadi kinnitamine monitorile

1. Carefully place your monitor face down on a soft, clean surface to prevent scratches.
2. Joondage VESA plaat monitori tagaküljel olevate kinnitusavadega.
3. Secure the VESA plate using the appropriate screws and washers provided in the hardware kit. Do not overtighten.

Pilt: The VESA mounting plate being secured to the back of a monitor with screws, indicating the initial step of preparing the monitor for attachment to the arm.

6.2 Seinaplaadi paigaldamine

Tähtis: Use a stud finder to locate a wood stud, or ensure you have the correct masonry anchors for concrete/brick walls. A built-in level on the wall plate assists with alignment.

1. Determine the desired height and position for your monitor.
2. Hold the wall plate against the wall at the chosen location. Use the integrated bubble level to ensure it is perfectly horizontal.
3. Märkige puurimiskohad seinaplaadi aukudesse.
4. Drill pilot holes according to the instructions for your specific wall type (wood stud, concrete, or brick).
5. Attach the wall plate securely to the wall using the provided lag bolts for wood studs or appropriate anchors and bolts for masonry.

Pilt: Lähivõte view of the wall mounting plate, highlighting the integrated bubble level for accurate horizontal alignment during installation.

6.3 Attaching the Monitor Arm to the Wall Plate

1. Slide the monitor arm assembly onto the wall plate.
2. Secure the arm to the wall plate using the designated fasteners.

6.4 Monitori kinnitamine käe külge

1. With assistance, carefully lift the monitor (with the VESA plate attached) and slide it onto the VESA head of the arm.
2. Secure the monitor to the arm using the thumb screw or other locking mechanism.

7. Kasutusjuhend (reguleerimine)

The MOUNTUP MU2007 offers a full range of motion for optimal viewmugavust saades.

7.1 Gas Spring Adjustment (Monitor Weight)

The gas spring tension needs to be adjusted to match your monitor's weight for smooth movement and stable positioning. If the monitor rises too easily or drops, adjust the tension.

• Monitor Raises Up (too light): Turn the adjustment screw clockwise ("-" direction) to reduce tension for a lighter monitor.
• Monitor Drops Down (too heavy): Turn the adjustment screw counter-clockwise ("+" direction) to increase tension for a heavier monitor.

Märkus. When adjusting gas spring tension, hold the arm in a horizontal position. The number of turns depends on the display's weight; it may take up to 17 turns to find the correct tension.

7.2 Tilt Angle Adjustment

Adjust the monitor's vertical angle for optimal viewing.

1. Loosen the tilting bolt (turn to "-" direction).
2. Adjust the monitor to your desired angle (+90° / -45°).
3. Retighten the tilting bolt (turn to "+" direction) to secure the position.

Pilt: Detailed instructions for adjusting the gas spring tension (clockwise for lighter monitors, counter-clockwise for heavier monitors) and the tilt angle (loosen, adjust, retighten bolt).

7.3 Rotation (Landscape/Portrait)

The monitor can be rotated 360° to switch between landscape and portrait orientations.

Pilt: A monitor shown rotating 360 degrees, illustrating the ability to switch between landscape and portrait orientations.

7.4 Swivel and Extension

The arm allows for 180° swivel at the wall plate and 270° at the arm joint, providing flexible positioning. It can extend up to 21 inches from the wall and retract to a minimum of 3 inches when not in use, maximizing desktop space.

Pilt: A monitor arm swiveling and folding towards the wall, demonstrating how it can control desktop space by retracting to a minimum of 3 inches and extending up to 21 inches.

7.5 Kõrguse reguleerimine

The gas spring mechanism allows for a smooth 10.6-inch vertical height adjustment, enabling ergonomic positioning for both seated and standing work.

Pilt: Läbipaistev view of the monitor arm highlighting the internal gas spring and demonstrating a 10.6-inch height adjustment range for smooth movement.

7.6 Kaablihaldus

Route your cables through the integrated cable management channels on the arm to maintain a clean and organized workspace.

Pilt: A monitor arm with blue cables neatly routed along its underside, illustrating the integrated cable management feature designed to keep the workspace tidy.

8. Hooldus

• Puhastamine: Pühkige alust pehme lapigaamp lapiga. Vältige abrasiivseid puhastusvahendeid või lahusteid.
• Perioodilised kontrollid: Kontrollige regulaarselt kõiki kruvisid ja polte, et need oleksid kindlalt kinni. Vajadusel pingutage uuesti.
• Gaasivedru: The gas spring is designed for long-term use and generally requires no maintenance. If movement becomes stiff or loose, refer to the gas spring adjustment section.

9. Veaotsing

• Monitor does not stay in position (drifts up or down): This indicates incorrect gas spring tension. Refer to Section 7.1 "Gas Spring Adjustment" and adjust the tension screw until the monitor holds its position smoothly. Remember to hold the arm horizontally during adjustment.
• Monitor is difficult to move: The gas spring tension may be too high for your monitor's weight, or the pivot points might be too tight. Loosen the gas spring tension slightly (turn clockwise) or check for any overtightened bolts at the arm joints.
• Monitori värisemine: Ensure all mounting bolts (wall plate, arm to wall plate, VESA plate to monitor, and monitor to arm) are securely tightened. Check that the wall mount is firmly attached to a suitable wall structure.
• Monitor cannot tilt: Ensure the tilt angle adjustment bolt (refer to Section 7.2) is sufficiently loosened before attempting to tilt the monitor.

10. Garantii ja tugi

This MOUNTUP product is backed by a 3-year support period. If you encounter any issues during installation or use, or have any questions, please contact MOUNTUP customer service for assistance. Refer to your purchase documentation for contact details.