1. Sissejuhatus
Thank you for choosing the Vikeri 4K 32MP Trail Camera. This manual provides detailed instructions for setting up, operating, and maintaining your camera to ensure optimal performance for wildlife monitoring, hunting, and security applications. Please read this manual thoroughly before using the camera.
2. Toote lõppview
The Vikeri 4K 32MP Trail Camera is designed for high-resolution image and video capture in various outdoor environments. Key features include:
- Ultra-High Resolution: Captures 4K video and 32MP still images.
- Öine nägemine: Equipped with 40 no-glow infrared LEDs for clear night recordings up to 80ft.
- Fast Trigger Time: 0.1-second trigger speed to capture fast-moving subjects.
- Lai väli View: 120° wide-angle lens for comprehensive monitoring.
- Vastupidav disain: IP66 waterproof and dustproof rating, operating in temperatures from -22°F to 158°F.
- Liikumine aktiveeritud: PIR sensor detects movement up to 80ft during the day and 65ft at night.
Figure 2.1: Vikeri 4K 32MP Trail Camera with a 32GB memory card and four AA batteries.
3. Seadistamine
- Patareide paigaldamine: Open the battery compartment. Insert 4 or 8 AA batteries (not included, unless specified in package) according to the polarity markings. Ensure proper orientation.
- Sisestage SD-kaart: Open the camera latch. Locate the SD card slot. Insert a Class 10 or higher SD card (up to 256GB, 32GB included with some models) with the metal contacts facing down until it clicks into place.
- Toide sisse: Switch the camera mode selector from OFF to TEST or ON. In TEST mode, you can access the menu and adjust settings.
- Kaamera paigaldamine:
- Use the included mounting strap to secure the camera to a tree or pole. Thread the strap through the slots on the back of the camera and tighten.
- Alternatively, use the tripod screw mount on the bottom for a tripod or other mounting accessories.
- Position the camera approximately 3-6 feet (1-2 meters) from the ground, aiming towards the area you wish to monitor.
4. Kasutusjuhised
4.1. Režiimi valik
The camera has three main modes:
- VÄLJAS: Lülitage kaamera välja.
- TEST: Võimaldab teil view the screen, adjust settings, and manually trigger photos/videos. The PIR sensor is active in this mode for testing detection range.
- PEAL: The camera enters monitoring mode. The screen turns off after a few seconds, and the camera will capture photos/videos automatically when motion is detected.
4.2. Menu Settings (in TEST mode)
Use the navigation buttons (UP, DOWN, LEFT, RIGHT, OK, MENU) to navigate and adjust settings.
| Seadistamine | Kirjeldus | Soovitatav väärtus |
|---|---|---|
| Režiim | Valige Foto, Video või Foto+Video. | Foto+video |
| Foto eraldusvõime | Set image resolution (e.g., 32MP, 20MP, 16MP). | 32 MP |
| Video eraldusvõime | Set video resolution (e.g., 4K, 2.7K, 1080P). | 4K |
| PIR tundlikkus | Liikumisanduri tundlikkuse reguleerimine (kõrge, keskmine, madal). | Keskmine |
| Käivitusintervall | Time delay between detections (e.g., 5s, 10s, 30s). | 10 sekundit |
| Time Lapse | Jäädvustage pilte kindla intervalliga olenemata liikumisest. | Väljas |
| Kuupäev ja kellaaeg | Seadke praegune kuupäev ja kellaaeg. | Praegune |
Figure 4.1: The camera's 0.1-second trigger time ensures capture of fast-moving subjects.
Figure 4.2: The 120° wide-angle lens captures a broad field of view, detecting motion up to 65ft.
Figure 4.3: The IP66 rating ensures the camera is protected against rain, dust, ice, and snow.
Figure 4.4: Night vision with 40 no-glow 940nm LEDs provides clear images up to 80ft in darkness.
Figure 4.5: The camera supports ultra-clear 32MP images and 4K video resolution.
Joonis 4.6: näitample of a 32MP image and a frame from a 4K HD video captured by the camera.
5. Hooldus
- Puhastamine: Use a soft, dry cloth to clean the camera lens and PIR sensor window. Do not use abrasive cleaners or solvents.
- Patarei vahetus: Replace all batteries at the same time. Do not mix old and new batteries or different types of batteries.
- SD-kaardi haldus: Format the SD card regularly (at least once a month) using the camera's menu to ensure optimal performance and prevent data corruption.
- Hoiustamine: Kui kaamerat pikemat aega ei kasutata, eemaldage patareid ja hoidke seda jahedas ja kuivas kohas.
6. Veaotsing
| Probleem | Võimalik põhjus | Lahendus |
|---|---|---|
| Kaamera ei lülitu sisse | Tühjad või tühjad patareid; vale patareide polaarsus; vigane SD-kaart. | Replace batteries; check polarity; remove SD card and try powering on. |
| Halb pildi-/videokvaliteet | Määrdunud objektiiv; hämar valgustingimused; valed eraldusvõime sätted. | Clean lens; ensure sufficient light or use night vision; adjust resolution settings. |
| Kaamera ei käivitu | PIR sensitivity too low; trigger interval too long; PIR blocked. | Increase PIR sensitivity; shorten trigger interval; ensure clear view for PIR sensor. |
| SD-kaardi viga | SD card full; incompatible SD card; corrupted SD card. | Kustuta files or replace SD card; use Class 10 or higher; format SD card in camera. |
7. Tehnilised andmed
| Funktsioon | Detail |
|---|---|
| Foto eraldusvõime | Kuni 32 MP |
| Video eraldusvõime | Kuni 4K |
| Käivitage kiirus | 0.1 sekundit |
| Öise nägemise ulatus | Up to 80ft (24m) with 40pcs No Glow IR LEDs |
| PIR-tuvastusulatus | Day: 80ft (24m), Night: 65ft (20m) |
| Väli View | 120° Wide Lens |
| Veekindluse reiting | IP66 |
| Töötemperatuur | -22 °F kuni 158 °F (-30 °C kuni 70 °C) |
| Säilitamine | SD Card (up to 256GB, Class 10 or higher) |
| Toiteallikas | 4 or 8 AA Batteries (external DC 6V/2A supported) |
| Ekraan | 2.4'' LCD |
8. Garantii ja tugi
Vikeri products are designed for reliability and performance. This product comes with a standard manufacturer's warranty. For detailed warranty information, technical support, or service inquiries, please refer to the contact information provided with your purchase or visit the official Vikeri websaidile.
Garantiinõuete esitamiseks säilitage ostutõend.
