Sissejuhatus
Thank you for choosing the Feit Electric LED Outdoor Security Flood Light. This fixture is designed to provide bright, energy-efficient illumination with advanced motion sensing and dusk-to-dawn capabilities for enhanced outdoor security and convenience. Please read this manual thoroughly before installation and operation to ensure proper function and safety.
Pilt: Esikülg view of the Feit Electric LED Outdoor Security Flood Light, showing its dual adjustable heads and motion sensor.
Ohutusteave
HOIATUS: Risk of electric shock. Disconnect power at the fuse or circuit breaker before installing or servicing. Improper wiring can result in electric shock or fire.
- Kõik elektriühendused peavad vastama kohalikele ja riiklikele elektrinormidele (NEC).
- Kui te pole juhtmestiku protseduurides kindel, pidage nõu kvalifitseeritud elektrikuga.
- Do not install near combustible materials or in areas with explosive atmospheres.
- Ensure the fixture is securely mounted to a structural surface.
- This fixture is rated for outdoor wet locations (IP65).
Pakendi sisu
Enne paigaldamise alustamist veenduge, et kõik komponendid on olemas:
- LED Outdoor Security Flood Light Fixture
- Kinnitusdetailid (kruvid, traatmutrid)
- Tihend
- Kasutusjuhend
Image: The Feit Electric LED Outdoor Security Flood Light, showing the main unit and its components.
Tehnilised andmed
| Funktsioon | Detail |
|---|---|
| Mudeli number | S9DFL/850/MOT/WH |
| Kaubamärk | Feit Electric |
| Valguse väljund | 2000 XNUMX luumenit |
| Värvi temperatuur | 5000K päevavalgust |
| Wattage | 28 vatti |
| Voltage | 120 volti |
| Liikumisanduri nurk | 180° |
| Liikumisanduri ulatus | Kuni 50 jalga |
| Hämarusest koiduni andur | Integreeritud |
| Ilmastikukindlus | IP65 veekindel |
| Materjal | Plastic, Polycarbonate Lens |
| Mõõdud (P x L x K) | 9" x 5.6" x 7.7" |
| Eluiga | 50,000 tundi |
Image: A graphic detailing key specifications of the Feit Electric LED Outdoor Security Flood Light, including wattage, lumens, color temperature, and IP rating.
Paigaldusjuhised
1. Valmistuge installimiseks
- Lülitage toide välja: Leidke kaitselüliti või kaitsmekarp ja lülitage välja ühenduskarbi toide, kuhu seade paigaldatakse.
- Tühjendage ala: Ensure the installation area is clear of obstructions and provides stable support for the fixture.
2. Kinnitusseadme paigaldamine
The fixture is designed for wall mounting. Use the provided mounting plate for secure installation.
- Attach the mounting plate to the junction box using the provided screws. Ensure the plate is flush and secure.
- Juhtige elektrijuhtmed ühenduskarbist läbi kinnitusplaadi keskmise augu.
- Position the fixture against the mounting plate, ensuring the gasket is properly seated to prevent water intrusion.
Image: Illustration of the mounting back plate and screws, demonstrating the hands-free wiring design for easier installation.
3. Juhtmete ühendused
Connect the fixture wires to the household wiring using the provided wire nuts:
- Ühendage must juhe kinnitusdetailist kuni must (faasitud) juhe ühenduskarbist.
- Ühendage valge juhe kinnitusdetailist kuni valge (neutraalne) juhe ühenduskarbist.
- Ühendage roheline (maandus)juhe kinnitusdetailist kuni roheline or bare copper (ground) wire from the junction box.
- Veenduge, et kõik ühendused oleksid kindlalt kinnitatud ja isoleeritud traatmutritega.
4. Secure the Fixture
Once wiring is complete, align the fixture with the mounting plate and secure it using the provided screws. Ensure a tight seal to maintain the IP65 waterproof rating.
Pilt: Külg view of the flood light, illustrating the adjustable light heads and motion sensor for optimal positioning.
Kasutusjuhised
1. Power On and Initial Test
After installation, restore power at the circuit breaker. The light may cycle on and off briefly as it calibrates.
2. Liikumisanduri funktsionaalsus
The integrated motion sensor detects movement within a 180° wide sensing angle and up to 50 feet away. When motion is detected, the light will turn on automatically. The duration the light stays on after motion ceases is typically adjustable (refer to specific model controls if available, usually a dial on the sensor itself).
Image: Diagram illustrating the wide-beam optics and motion sensor detection range, showing coverage up to 50 feet.
3. Dusk-to-Dawn Functionality
The built-in light sensor automatically detects ambient light levels. The fixture will activate at dusk and deactivate at dawn, ensuring illumination only when needed. This feature works in conjunction with the motion sensor, meaning the motion sensor will only be active during nighttime hours.
Image: Visual representation of the dusk-to-dawn sensor, showing the light activating as ambient light decreases and deactivating as it increases.
4. Adjusting Light Heads and Sensor
The two LED light heads and the motion sensor are adjustable. Carefully pivot them to direct light and motion detection to your desired areas. Do not overtighten adjustment screws.
Hooldus
- Puhastamine: Ensure power is off before cleaning. Wipe the fixture with a soft, damp lapiga. Ärge kasutage abrasiivseid puhastusvahendeid ega lahusteid, kuna need võivad kahjustada viimistlust või elektrilisi komponente.
- Ülevaatus: Periodically inspect the fixture for any signs of damage, loose wiring, or wear.
- LEDid: The integrated LEDs are designed for long life and are not user-replaceable.
Image: The Feit Electric flood light shown in a rainy environment, emphasizing its IP65 wet-rated and weather-resistant construction.
Veaotsing
| Probleem | Võimalik põhjus | Lahendus |
|---|---|---|
| Valgus ei lülitu sisse. | No power, loose wiring, faulty sensor. | Check circuit breaker. Verify all wiring connections. Ensure sensor is not obstructed. |
| Valgus põleb pidevalt. | Constant motion detected, sensor sensitivity too high, dusk-to-dawn sensor malfunction. | Check for continuous motion in sensor's field of view. Adjust sensor sensitivity. Ensure no ambient light is interfering with the dusk-to-dawn sensor. |
| Valgus süttib päeva jooksul. | Dusk-to-dawn sensor obstructed or malfunctioning. | Ensure the dusk-to-dawn sensor is not covered or in a shaded area that mimics nighttime conditions. |
| Liikumisanduri leviala on kehv. | Sensor obstructed, incorrect angle, environmental factors. | Clear obstructions. Adjust sensor angle. Avoid placing near heat sources or reflective surfaces. |
Garantii
This Feit Electric product is warranted to be free from defects in workmanship and materials for 5 aastat from the date of purchase. If the product fails within the warranty period, please contact Feit Electric for replacement or refund. This warranty expressly excludes incidental and consequential damages.
Toetus
For technical assistance or further inquiries, please visit the official Feit Electric website or contact their customer support. Refer to the product packaging or the Feit Electric websaidilt kõige ajakohasemad kontaktandmed.
Feit Electric Websait: www.feit.com
