CINOTON 26W LED Wall Pack Light with Dusk to Dawn Sensor Instruction Manual

Sissejuhatus

Thank you for choosing the CINOTON 26W LED Wall Pack Light. This durable and energy-efficient outdoor lighting fixture is designed to provide reliable illumination with automated dusk-to-dawn functionality. Featuring a robust die-cast aluminum housing and IP65 waterproof rating, it is suitable for various outdoor environments, including yards, patios, barns, and commercial spaces. This manual will guide you through the installation, operation, and maintenance of your new light fixture.

Ohutusteave

• Always turn off power at the circuit breaker before installation, servicing, or cleaning the fixture.
• Paigalduse peaks teostama kvalifitseeritud elektrik vastavalt riiklikele ja kohalikele elektrieeskirjadele.
• Veenduge, et toiteallikas voltage (100-277Vac) is compatible with the fixture.
• Do not install the fixture in a narrow corner or under a roof with obstructions. Reflected light can affect the light sensor's incorrect judgment.
• Toode sobib kasutamiseks damp environments, with an ambient temperature not exceeding 104°F (40°C).
• Ensure the fixture is securely mounted on the wall and apply silicone caulk around the back edges of the fixture where it meets the wall.
• Ärge avage valgustit LED-i puhastamiseks. Ärge puudutage LED-i.
• Paigaldamise ajal vigastuste vältimiseks on soovitatav kanda kindaid.
• If any smoke or spark occurs, turn off the power immediately.

Pakendi sisu

Your CINOTON 26W LED Wall Pack Light package includes:

• 2 x 26W LED Wall Pack Lights (Warm White)
• 6 x Spiral Caps
• 1 x kasutusjuhend

Toode läbiview & Funktsioonid

The CINOTON 26W LED Wall Pack Light is engineered for optimal outdoor performance and energy efficiency.

• Hämarusest koiduni kasutatav fotoelement: Automatically turns the light OFF at sunrise/daytime and ON at sundown/night, providing hands-free operation and energy savings.
• Kõrge energiatõhusus: Consumes only 26W, replacing standard 150-250W metal halide and high-pressure sodium fixtures, saving up to 70% on electricity bills.
• Hele valgustus: Equipped with 30 LED bulbs, delivering 3000 lumens of warm white (3000K) light.
• Pikk eluiga: Designed for a lifespan of 50,000 hours, ensuring long-term, maintenance-free operation.
• Vastupidav konstruktsioon: Features a die-cast aluminum housing with a clear, shatter-resistant polycarbonate lens, offering anti-corrosion and IP65 waterproof protection against harsh weather conditions (rain, heavy snow, extreme temperatures from -22°F to 122°F).
• Wide Voltage Ühilduvus: Toetab sisendvoltage from 100-277Vac, compatible with USA 110Vac voltage.
• Kompaktne disain: Unit size is L6.0" x H9.1" x W3.6".

Image: CINOTON 26W LED Wall Pack Light showcasing its dusk-to-dawn sensor and automatic on/off functionality. The image displays the light in both daytime (off) and nighttime (on) scenarios, illuminating a house entrance.

Image: The CINOTON LED Wall Pack Light demonstrating its all-weather resistance, including IP65 waterproof rating, frost resistance (-4°F), and storm resistance, shown with rain and lightning effects.

Seadistamine ja installimine

Follow these steps for safe and proper installation of your CINOTON LED Wall Pack Light. Ensure power is OFF at the circuit breaker before starting.

1. Eemaldage objektiiv: Unscrew the 2 screws securing the lens to the rear housing and set the lens aside.
2. Remove Reflector: Loosen 2 screws enough to allow the reflector to slide upward until the keyhole releases from the screws. Remove the reflector.
3. Knock Out Holes: Knock out appropriate holes in the rear housing to fit the outlet box.
4. Juhtmed: Complete the wiring to the power source (black wire to live, white wire to neutral, green/yellow wire to ground) using supplied spiral caps. Ensure minimum 14 AWG copper wire conductors.
5. Paigaldage reflektor: Replace the reflector, ensuring it is securely fastened.
6. Installige objektiiv: Secure the lens back onto the housing with the 2 screws.
7. Seal Gap: For a better seal against rain, it is suggested to apply silicone caulk around the back edges of the fixture where it meets the wall.

Paigaldusvalikud: The fixture supports both direct wall mount and conduit mount for versatile outdoor wiring scenarios.

Image: Step-by-step visual guide for installing the CINOTON LED Wall Pack Light, showing removal of lens, loosening screws, knocking out holes, wiring, and reassembly.

Image: Illustration of the two available mounting options for the CINOTON LED Wall Pack Light: direct wall mount and conduit mount, suitable for various outdoor wiring scenarios.

Kasutusjuhised

The CINOTON 26W LED Wall Pack Light features an integrated dusk-to-dawn photocell for automatic operation.

• Once installed and powered, the light will automatically turn ON when ambient light levels fall (sundown/night).
• The light will automatically turn OFF when ambient light levels rise (sunrise/daytime).
• Ensure there are no obstructions in front of the sensor light to guarantee proper functionality.

Hooldus

• Clean the polycarbonate lens with non-abrasive glass cleaning solution.
• Ärge avage valgustit LED-i puhastamiseks. Ärge puudutage LED-i.

Veaotsing

• Why my lights flashes on and off repeatedly?

  Avoid installing it in a narrow corner or under a roof with obstructions. Reflected light can affect the light sensor's incorrect judgment.
• Light is nice, but photocell doesn't work / light stays on all the time.

  The sensitivity would be affected by temperature, weather, or surrounding light sources.

• If the lights stop working when the return window closes, please feel free to contact us. 24-hours customer service team will help you solve the problems. (cinoton.service@gmail.com)

Tehnilised andmed

Garantii ja tugi

The CINOTON 26W LED Wall Pack Light comes with a Limited Warranty. For any questions, issues, or support, please contact the customer service team at cinoton.service@gmail.com. A 24-hour customer service team is available to assist you.