CIARRA CAS9201A 90 cm Class A Wall-Mounted Extractor Hood

1. Oluline ohutusteave

Please read this manual carefully before installation and use. Keep it for future reference. Incorrect installation or use may cause electric shock, fire, or injury.

• Elektriohutus: Veenduge, et toiteallikas vastaks mahuletage specified on the rating plate. The appliance must be properly grounded. Do not use extension cords or multiple adapters.
• Paigaldamine: Installation must be carried out by a qualified person in accordance with all local regulations. Maintain the minimum distance between the hob and the lower part of the hood as specified in the installation instructions.
• Ventilatsioon: Kui õhupuhastit kasutatakse samaaegselt gaasi- või muude kütust põletavate seadmetega, tagage ruumis piisav ventilatsioon.
• Puhastamine: Regularly clean the appliance and its filters to prevent grease accumulation, which can pose a fire risk.
• Lapsed ja haavatavad isikud: Seda seadet võivad kasutada 8-aastased ja vanemad lapsed ning piiratud füüsiliste, sensoorsete või vaimsete võimetega või kogemuste ja teadmiste puudumisega inimesed, kui neid on jälgitud või juhendatud seadme ohutu kasutamise kohta ja nad mõistavad sellega kaasnevaid ohte. . Lapsed ei tohi seadmega mängida. Lapsed ei tohi ilma järelvalveta puhastada ja hooldada.

2. Toote lõppview

The CIARRA CAS9201A is a 90 cm wall-mounted extractor hood designed for efficient kitchen ventilation. It features a powerful 370 m³/h suction capacity and three adjustable speed levels to effectively remove cooking fumes and odors. The hood is equipped with durable aluminum grease filters and energy-efficient LED lighting.

Figure 2.1: CIARRA CAS9201A 90cm extractor hood installed in a contemporary kitchen.

Peamised omadused:

• Energiatõhususe klass A: Up to 40% energy saving compared to Class C models.
• Suur imemisvõimsus: 370 m³/h for effective air purification.
• Kolm kiirustaset: Adjustable fan speeds for various cooking needs.
• Dual Working Modes: Can be configured for ducted extraction or recirculation with optional carbon filters.
• Alumiiniumist rasvafiltrid: Three 26 cm aluminum filters, washable for easy maintenance.
• LED valgustus: Integrated LED light for illuminating the cooking area.
• Puutetundlikud juhtnupud: Intuitiivne juhtpaneel lihtsaks kasutamiseks.

Figure 2.2: Energy efficiency comparison, highlighting 40% savings for Class A.

3. Paigaldamine

The CIARRA CAS9201A extractor hood is designed for wall mounting. It can operate in two modes: ducted extraction or recirculation. Ensure all necessary accessories are present before beginning installation.

3.1 Pakendi sisu:

• 1 x õhupuhasti
• 1 x Bag of Screws and Wall Plugs
• 2 x Aluminum Grease Filters (pre-installed)
• 2 x Chimney Extension Sections (40+40 cm)
• 1 x Exhaust Duct (1.5 m)
• 1 x UK Standard Plug (may vary by region)
• 1 x kasutusjuhend
• 1 x Pair of Carbon Filters (for recirculation mode, included)

3.2 Installimisetapid:

1. Ettevalmistus: Unpack the hood and check for any damage. Ensure you have all components listed above.
2. Paigalduskõrgus: Determine the appropriate mounting height above your hob. Refer to local building codes and the minimum distance specified in the full manual.
3. Märgistamine ja puurimine: Use the provided template (if available) or measure carefully to mark drilling points on the wall for the hood and chimney bracket. Drill holes and insert wall plugs.
4. Kapoti paigaldamine: Secure the hood to the wall using the provided screws. Ensure it is level and firmly attached.
5. Ducting (Ducted Mode): Connect the exhaust duct to the hood's outlet and route it to an external vent. Ensure the duct is as straight and short as possible to maximize efficiency.
6. Recirculation (Filter Mode): If using recirculation, install the carbon filters onto the motor as per the instructions in the full manual. The exhaust duct is not used in this mode, but the chimney sections are still installed for aesthetic purposes.
7. Korstna paigaldamine: Attach the chimney extension sections, ensuring they fit securely and cover the ducting or motor assembly.
8. Elektriühendus: Connect the hood to a suitable power outlet.

Figure 3.1: Dimensional drawing of the CAS9201A hood (Unit: mm).

Figure 3.2: Illustration of ducted (left) and recirculation (right) modes.

4. Kasutusjuhised

The CIARRA CAS9201A extractor hood features intuitive touch controls for easy operation of its functions.

4.1 Juhtpaneel:

The control panel is located on the front underside of the hood. It typically includes buttons for power, fan speed adjustment, and lighting.

Figure 4.1: Close-up of the control panel with power, speed, and light buttons.

4.2 funktsiooni:

• Toide sisse/välja: Õhupuhasti sisse- või väljalülitamiseks vajutage toitenuppu.
• Ventilaatori kiiruse reguleerimine: Select from three speed levels (low, medium, high) to match your cooking intensity. Use lower speeds for simmering and higher speeds for frying or grilling.
• Valgus sees/väljas: Press the light button to turn the LED cooking area illumination on or off.

For optimal performance, turn on the hood a few minutes before you start cooking and leave it running for a few minutes after you finish to ensure all fumes are cleared.

5. Hooldus

Regular maintenance ensures the longevity and efficient operation of your CIARRA extractor hood.

5.1 Alumiiniumist rasvafiltrite puhastamine:

The aluminum grease filters should be cleaned regularly, typically every 2-4 weeks depending on usage, to prevent grease buildup and maintain suction efficiency. They are washable and can be cleaned by hand or in a dishwasher.

1. Eemaldamine: Carefully unlatch and remove the aluminum grease filters from the underside of the hood.
2. Puhastamine: Wash the filters in warm soapy water or place them in a dishwasher on a gentle cycle. Avoid using abrasive cleaners.
3. Kuivatamine ja uuesti paigaldamine: Allow the filters to dry completely before reinserting them into the hood.

Joonis 5.1: Lähivõte view of the aluminum grease filter.

5.2 Replacing Carbon Filters (Recirculation Mode Only):

If your hood is operating in recirculation mode, the carbon filters (included) need to be replaced periodically, typically every 3-6 months, as they cannot be washed. Refer to the full manual for specific replacement instructions.

5.3 Cleaning the Hood Surface:

Clean the exterior surfaces of the hood with a soft cloth and a mild, non-abrasive cleaning agent. Do not use harsh chemicals or abrasive pads, as these can damage the stainless steel finish.

Figure 5.2: Demonstrating cleaning the hood surface.

6. Veaotsing

This section provides solutions to common issues you might encounter with your extractor hood. If the problem persists, contact customer support.

7. Tehnilised andmed

Figure 7.1: Energy label for the CIARRA extractor hood.

8. Garantii ja tugi

Your CIARRA CAS9201A extractor hood comes with a standard manufacturer's warranty. Please refer to the warranty card included in your package for specific terms and conditions, including the warranty period and coverage details.

For technical assistance, spare parts, or any other inquiries, please contact CIARRA customer support. Contact information can typically be found on the manufacturer's webveebisaidil või tootega kaasasolevas dokumentatsioonis.

When contacting support, please have your model number (CAS9201A) and purchase date ready.